详细阐述了工作流建模和仿真工具的需求分析、设计和实现；重点讨论了工作流模型检测和仿真分析。
This paper expatiates on requirement analysis, design and implementation of workflow modeling and simulation tool, and mainly discusses workflow model check and simulation analysis.
利用管道系统特性，建立软管的数学模型，对含软管的液压系统进行了准确方便的建模和仿真研究。
Using the systematic characteristic of the pipeline, this paper sets up the mathematical model of the hose and simulates the hydraulic system that includes the hoses accurately and conveniently.
建立了基于组件技术的模型规范和软件体系结构，实现组合式的仿真应用构建模式。
Component software technology based on model specification and software architecture is established, which realized simulation system constructing mode of composing.
给出了设计可靠性的建模方法和用数字仿真评估设计可靠性的模型方法和仿真过程并给出了一个典型电路的仿真实例。
The model and method for estimating circuit design reliability by using digital simulation are established. A simulation example of the typical fuze circuit is given in this paper.
首先本文简要描述了LEACH协议的网络模型以及能量模型，随后介绍了利用OPNET进行LEACH协议建模的步骤，最后给出并分析了仿真结果。
Firstly the network model and energy model of LEACH are briefly described, then modeling steps of LEACH based on OPNET are introduced, lastly the simulation result is presented and analyzed.
针对催化裂化装置反应再生系统，进行了动态机理建模研究，给出了可以用于过程特性分析和控制系统仿真研究的动态机理模型。
Based on mechanism analysis, a dynamic model of FCCU reactor-regenerator system is given. It can be used for simple process characteristic analysis and for control system simulation.
建模所得的实体模型直接用于运动仿真分析和有限元分析，缩短了设计所需的时间，减少了软件间的数据交换。
Entity model from modeling can be directly used in motion simulation analysis and finite element analysis, which shortens the design time and reduces the data exchange between softwares.
文中提出的功率键合图建模方法能够较好地完成对人体循环系统建立仿真模型的工作，并对一个简化的循环系统生理模型进行了计算机仿真研究。
In this paper, the Power Band Graph (PBG) modeling method is used to realize modeling of the human circulation system and conduct a simulation study on a simplified physiological system model.
在协同仿真中，需要对模型对象和仿真数据进行统一地组织和管理，需要模型库管理系统对建模和仿真过程提供支持。
In collaborative simulation, we need organize and manage model object and simulation data, and need model base to support modeling and simulation process.
在基于建模和仿真的飞行器设计过程中，由于客观存在的不确定性，导致了模型预测结果与真实情况的不一致。
In aircraft designing process based on modeling and simulation, there exists a vast amount of uncertainty, which causes modeling predictions to differ from reality.
针对保税港区海关卡口区域的建模问题，从海关监管、交通特征及排队网络分析出发建立了其离散事件仿真模型。
For modeling customs checkpost area on free trade port area, a discrete event simulation model was built by the analysis on queuing network, characteristics of customs supervision and traffic flow.
CORBA作为系统的“软总线”把飞行仿真建模环境的前台和远程的模型库和算法库连接起来。
As the system's "software bus", CORBA connects the stage of flight simulation modeling environment and the long-distance model warehouse and algorithms library.
交通运输仿真系统模型则考虑了施工过程中各种施工边界条件动态变化的特性，并具有方便建模的优点。
Transportation simulation system model considers various kinds of construction border, which has dynamic characteristic in the construction course, has a advantage of facilitating modeling.
针对输入和输出均为时变函数或过程的实际系统建模和仿真问题，提出一种输入和输出均为时变函数的反馈过程神经网络模型。
In order to model and simulate systems with time-varying functions or processes, a feedback process neural network model with time-varying input and output functions is proposed.
结合当前电力系统的实际需要，提出了稳定计算用励磁系统数学模型仿真建模及参数校核方法。
The simulation modeling method of excitation system for stability calculation and the check method of parameters are proposed based on the current need of power system.
采用理论建模和数字仿真方法，对燃气轮机双燃料伺服系统的动态数学模型进行研究。
This paper studies the dynamic mathematical model of the dual fuel servo system in gas turbines by the methods of the theoretical modelling and digital simulation.
对MPEG视频业务的建模的仿真结果表明，TES模型能够很好地表征网络业务流的突发性。
The simulation results on modeling of MPEG-compressed video traffic demonstrate that TES models are able to characterize the burstiness of network traffic streams.
本文就心血管系统模型的国内外研究现状与进展以及心血管系统建模仿真的发展趋势进行综述。
This paper summarizes the re - search progress and status of cardiovascular circulation system models at home and abroad, as well as the trend of cardiovascular system modeling and simulation.
在C62货车模型的基础上，通过动力学仿真软件SIMPACK，采用滚动体接触建模法解决了用集装箱装载液体货物的模型问题。
On the basis of an integrated model of C62 freight car, the problem of modeling for liquid transport with containers with dynamic software SIMPACK and contact modeling method.
在分析交流异步电动机数学模型的基础上，提出了交流异步电动机控制系统仿真建模的新方法。
Based on the mathematical model of AC asynchronism motor, a novel method for modeling and simulation of AC asynchronism motor control system in Matlab was proposed.
该文提出基于组合结构的有限元方法概念，讨论车架组合结构各主要连续体部件之间的物理作用关系及其有限元模型的建模仿真方法。
A concept of FEM for assembled structures is put forward, and then is applied to a model building for vehicle frame with its physical acting relations between major components discussed.
具体的仿真试验表明这两种建模方法对于复杂的多输入系统的建模，在效率与精度上比anfis模型及其他模型都要好。
The simulation results show that both methods are more powerful than ANFIS method in modeling complicate multi-input systems concerning with efficiency and precision of the model.
通过对感应加热过程中轴承内环内外表层温度的测试，间接证明了所建模型和计算机仿真的正确性。
The correctness of the models and simulation had been verified indirectly by testing the temperature inward-outward superficial coat of the bearing race snap.
对GDCN的建模技术进行分析后，提出了基于仿真分析和元模型技术的领域级约束建模的有效方法。
Then, the modeling method of GDCN was analyzed, and the effective modeling method of the domain constraints based on simulation and Meta modeling was presented.
因此，研究具有多输入单输出特性的传感器的电路仿真模型建模方法具有实际意义和应用价值。
Therefore, the study on a circuit simulation modeling method of sensors with multiple-input and single-output characteristics has practical significance and application value.
在对军用飞机维修保障过程分析的基础上，运用离散事件建模方法和计算机建模与仿真技术建立了飞机维修保障仿真模型。
An aviation maintenance model is established by using the discrete event modeling method and computer modeling and simulation technique after analyzing the military airplane maintenance process.
该文简要介绍了装备战斗损伤仿真的内容，详细论述了威胁模型、装备模型及损伤模型的基本结构及建模方法。
The content of battle damage simulation is briefly introduced in this paper, while the basic structure and modeling methods of threat model, equipment model and damage model are discussed in detail.
本文探讨了基于湖上环境的水声对抗仿真建模方法，分析了联邦声节点特性及其仿真模型的基本构成，指出了其独有的建模特点。
This paper discuss the method of acoustical warfare. Analytic basic form of Simulation model of commonwealth acoustical node and point out specially characterist of model.
针对战役级作战仿真对指挥决策模型的需求，提出了一种新的指挥决策建模方法—基于预定指挥规则的指挥决策建模方法。
Focusing on the requirement of command Decision model of campaign-level combat simulation, a new modeling method-Command Decision modeling method was given based on prearranged command regulation.
针对战役级作战仿真对指挥决策模型的需求，提出了一种新的指挥决策建模方法—基于预定指挥规则的指挥决策建模方法。
Focusing on the requirement of command Decision model of campaign-level combat simulation, a new modeling method-Command Decision modeling method was given based on prearranged command regulation.
应用推荐