本文介绍了剪切仪的机电一体化系统的设计，包括剪切仪的工作原理、机械结构及以PC机和PLC(可编程控制器)为核心的控制系统的设计。
This paper introduces the design of electro-mechanical shear instrument system, including shear instrument working principal, mechanical structure and control system that use PC and PLC as the core.
在激光等离子体实验中，用晶体谱仪可获得高温等离子体所发射的X光谱。
X-ray spectral lines emitted by high temperature plasma can be taken by means of crystal spectrograph in laser-plasma experiments.
一部功能性核磁共振造影扫描仪监控着脑部的活动，受到研究人员重点关注的是杏仁体，一个与情感反应有关的区域。
A functional MRI scanning device monitored brain activity, with the researchers concentrating on the amygdala, an area associated with emotional response.
运用超动态应变测试技术、超声波检测仪对层状复合岩体的爆破损伤破坏机理和破坏过程进行了实验研究。
By use of dynamic strain testing, the ultrasonic wave, bedded composite rock damage and fracture mechanisms and the fragmentation process during blasting have been experimentally studied.
为了降低重力无源导航系统成本，在速率方位平台上放置一个重力敏感器，以构成集重力仪和导航仪为一体的系统。
The cost of the gravity passive inertial navigation system will be lower with a rate azimuth platform and gravity sensor constituting a gravity measurement and navigation system.
为了降低激光测距机性能参数测试的复杂度，开发了一体化的激光参数测试仪。
The integrated laser tester is developed in order to reduce the complexity of parameters test of laser range finder.
用此干涉仪测量了低气压脉冲放电产生的冷等离子体的平均电子密度随时间的变化，取得了较为满意的结果。
Using this interferometer, the time variation of the average electron density of a low pressure pulsed plasma has been measured and the experimental result is quite satisfactory.
本文叙述了低频超声波检测仪的设计原理，电路分析，换能器结构并讨论了在混凝土，岩体中应用。
The design principle, circuit analysis, and transducer construction of the low frequency ultrasonic tester are described. The applications to testing concretes and rocks are discussed.
由于其高效率，该谱仪尤其适用于超短飞秒脉冲激光产生等离子体的实验研究。
Owing to its high efficiency, it is especially suitable for the experiments of ultrashort femtosecond pulse laser produced plasmas.
使用紧凑式汤姆生离子谱仪测量Z箍缩氖气等离子体的辐射离子束能谱。
Analyzing the energy spectra of ion beams emitted from neon Z-pinch plasma with a compact Thomson spectrometer.
阐述了用全谱直读型电感耦合等离子体发射光谱仪测定金属铬中铝、铜、铁、磷、硅元素的测试方法的研究。
The method for determination of aluminum, copper, iron, phosphorus and silicon in metallic chromium has been studied with a direct-reading inductively coupled plasma emission spectrometer.
和传统光谱仪相比，微型光谱仪的分辨率较低，但由于它体较小、价格便宜等优点广泛应用于许多测量、控制领域。
Compared to bulky macroscopic devices, microspectrometer has inferior spectral resolution but its small size and low cost more than compensates for this limitation in many applications.
介绍了一种在钢铁连铸结晶器连续液位仪上使用的BGO闪烁体探测器电路的设计。
Introduced BGO scintillator detector electric circuit design which used in the Continuous metal cast crystallizer in the steel and iron company.
应用毛细管流变仪，考察了线性低密度聚乙烯(LLDPE)熔体于短口型挤出流动中的末端压力损失及其影响因素。
The end pressure loss of LLDPE melt in short die extrusion and factors affecting the pressure loss were investigated by using a capillary rheometer.
亚砷酸车间的生产控制采用仪电一体化设计，所有电气设备、机组和阀门均在DCS上自动控制或远方遥控操作。
The production of arsenic trioxide is controlled by electrics and instrument, with all electrical equipment, units and valves automatically controlled by DCS or remote operation.
用新型旋转扭矩探测仪对铝合金熔体增粘过程中的粘度进行了实时检测和控制，研究了熔体粘度的变化规律以及粘度对孔结构的影响规律。
The real time measurement and control of the viscosity were achieved in the preparation process of al and al alloy, revealing the rule of viscosity change as well as the influence on pore structure.
应用熔体流动速率仪考察了口模半径、载荷及温度对聚全氟乙丙烯（FEP）流动性能的影响。
The influences of die radius, load and temperature on the flow properties of FEP melt were investigated by using a melt flow indexer.
本文试验研究了电感偶合等离子体光谱仪的工作参数、分析条件、样品溶解等对测定的影响，共存元素、基体的干扰情况。
In this paper operation parameters of ICP-AES, effects of analyzed condition and dissolving samples, interference of matrix and coexist elements are studied by experiments.
利用带有针孔的透射式光栅光谱仪研究了激光等离子体X射线辐射的原子序数依赖性和激光功率密度对辐射的影响。
This paper presents the studies of the dependence of soft X-ray emission on atomic-number and laser intensities by using a new diagnostic tool, pinhole transmission grating spectrograph (PTGS).
采用恒速型双毛细管流变仪研究一批聚烯烃熔体的高速挤出行为。
The high speed extrusion behaviors of several polyolefine melts were investigated by a double capillary rheometer of constant speed type.
利用自行开发的镁合金定量测氢仪研究了熔化条件和除气工艺对镁熔体含氢量的影响。
Effects of melting condition and degassing processes on hydrogen content in magnesium alloy melt were investigated with a self-developed instrument for measuring hydrogen content.
研制了一种新型的基于空间分辨的激光等离子体x射线极化谱仪。
An X-ray polarization spectrometer based on spatial resolution is designed and manufactured in laser-produced plasma experiments.
在变电容仪测量岩体爆炸应力波参量的多次实践中，发现存在着长线效应。
In many practical measurings of the blast stress wave parameters in rock mass by variable capacity instrument, long wire effect has been discovered.
为了实现黄河高浊度水在线自动检测，通过动态模型实验，使用透光脉动检测仪检测絮凝体的脉动值用以描述絮凝体的颗粒大小。
To measure high turbidity water of the Yellow Riv er automatically, granular sizes of flocs is determined by using transparent pulsation device through the dynamic modelling.
应用毛细管流变仪，考察了线性低密度聚乙烯(LLDPE)熔体于短口型挤出中的胀大现象及其影响因素。
The extrudate swell behaviour and the factors affecting it during short die extrusion of linear low density polyethylene (LLDPE) melt have been investigated by using a rheometer.
借助于图像分析仪分析了下贝氏体转变动力学。
The transformation kinetics of lower bainite was investigated with an image-analyzer.
介绍了使用粉体物性测试仪测量、计算粉体流动性指数的方法。
The method for measuring and calculating the powder fluidity index by means of powder physical property test set was presented.
目前国产及一些进口三轴仪都存在着体变量测精度不高的问题。
The static triaxial apparatus on the market, whether homemade or imported has the defect of low accuracy.
使用流式细胞仪(FACS)分析其染色体的倍性。
使用流式细胞仪(FACS)分析其染色体的倍性。
应用推荐