Repair worn parts of metal products by welding on extra layers.
通过焊接额外层，修复金属制品的磨损零件。
For repair welding on general grey cast iron weldment.
用于强度要求不高的灰口铸铁件的焊补。
Repair worn parts of metal products by welding on extra layers.
焊接额外层以修复磨损金属制品的零部件。
Used for repairing welding on the defect of gray cast iron pieces.
用于灰口铸铁缺陷的补焊。
For multilayer welding on steels, pulsed arc welding is recommended.
在多层钢加层焊时建议使用脉冲电弧焊。
Used for repairing welding on the defect of nodular cast iron pieces.
用于球墨铸铁缺陷的补焊。
Used for surfacing welding on low hardness under normal temperature such as axle.
常温低硬度堆焊。适用于矿山机械的堆焊与修补。
Quality and schedule of group welding on site has been improved through pre-assembly.
通过预组装，施工现场组焊质量和周期得到了保证。
Used for down hand welding and flat fillet welding on general low-carbon steel structures…
适用于船体结构低碳钢和其他相应等级的普通低碳钢的平焊、平角焊。
Used for surfacing welding on low hardness under normal temperature and repairing of mining machinery.
常温低硬度堆焊。适用于矿山机械的堆焊与修补。
For multilayer welding on steel, pulsed arc welding is recommended-also appropriate for oven soldering.
建议在钢材多层焊时使用脉冲电弧焊，也适合于炉焊。
The application of automatic TIG welding on stainless steel compound pipes production line is introduced.
介绍了钨极自动氩弧焊在不锈钢复合管生产线上的应用。
It was shown that spot - welding on the surface of the press frame pillar mainly resulted in the fracture.
分析结果表明，在机架柱上所进行的点焊是导致机架柱断裂的主要原因。
Programmable controller C20 is used in the program control of TIG automatic welding on manufacturing micro motor shell and stator core.
利用C20系列可编程序控制器对微电机加工制作中的定子铁心、电机壳体t IG自动焊接实现过程程序控制。
Mechanical property and microstructure of T91 steel pipe joint with TIG welding on different high-temperature test process was researched.
采用不同的高温试验工艺对T91钢管的TIG焊接头进行处理，分析TIG焊接头在力学性能和显微组织上的差异。
The effect of coating on anti corrosion has been studied, which is formed by laser cladding and plasma spurt welding on metal base of anti acid stainless steel.
研究了在耐酸不锈钢基体上采用激光熔覆和等离子喷焊两种工艺形成的涂层对耐腐蚀性的影响。
Rectify the axis lines, levelness and elevation of the positioning form, fix it by electric welding on the bear frame and then weld sufficient supports and lifts.
校正定位模板的轴线、水平度和标高，用电焊固定在支架上，并焊上足够数量的支撑和拉杆。
The main reason for tyre peeling consists in fatigue failure during surface contacting, and the remedial measure to tyre peeling consists mainly in welding on site.
轮带发生剥落掉块的原因主要是表面接触疲劳破坏，处理剥落掉块的方法主要是现场焊接。
The results indicate that it is feasible to conduct TIG welding on Zr R60702, and the procedure can guarantee product welding quality in actual production application.
结果表明，tig焊工艺对R 60702焊接是合理可行的，在生产应用中证明此工艺能够保证产品焊接质量。
The problems such as fissure of displacement, slit nonuniform and weld puddle flowing etc at the case of assembling and welding on orbital slit of pressure vessel are analyzed.
分析了在压力容器环缝组对及焊接中存在的错边、间隙不均匀以及焊接中熔池流动等问题。
Particularly suitable for repair welding of bronze statues. For multilayer welding on steels, pulsed arc welding is recommended. For large work pieces preheating is recommended.
特别适合铜雕像修复的焊接，建议在钢材多层焊时使用脉冲电弧焊，用于大焊件时建议预热。
A new type of materials of composite alloy coating with ultra-fine WC for submerged overlaying welding on the surface of continuous casting machines rollers is studied in this paper.
本文研究了一种应用于连铸辊的含超细wc粉末的埋弧堆焊复合敷层材料。
The effect of span between two cores of lime-titania type carbon-steel electrode was investigated using the method of overlay welding on the plate work-piece and high speed camera system.
采用平板堆焊的方法及高速摄像系统，研究了双电极钛钙型碳钢焊条的焊芯间距对焊接工艺和电弧形态的影响。
BT20 titanium alloy is welded with butt welding on GTAW machine... Experiment of plastic deformation is done on press and double heat preservation measure is used during plastic deformation.
试验采用钨极氩弧焊对接焊形式对BT 20钛合金施焊；焊接接头的塑性变形试验在油压机上进行，变形过程中采用了双保温措施。
The effect of different welding techniques, and alignment after welding, on the residual stress of rectangular girder weldment was studied.
介绍不同焊接工艺对厢形梁焊接残余应力的影响及校直前后其残余应力的变化。
The effect of different welding techniques, and alignment after welding, on the residual stress of rectangular girder weldment was studied.
介绍不同焊接工艺对厢形梁焊接残余应力的影响及校直前后其残余应力的变化。
应用推荐