Effect of surface residual stresses by ceramic grinding on fatigue wear property has been researched by experiment.
本文主要针对陶瓷材料磨削表面残余应力对疲劳磨损和表面硬度的影响进行实验研究。
Investigation results show that nanoparticles are excellent lube additive in point of anti-friction and anti-wear property.
研究表明，纳米粒子添加剂具有优良的抗磨减摩性能。
And then according to the constituents and construction morphology, the main reasons why Zn-Al alloy has good wear property are analyzed.
并结合锌铝合金的成份和组织结构特点，分析了具有良好耐磨性的主要原因。
The results indicate that the lead laurate have an excellent anti wear property, high friction reducing efficiency and extreme pressure property.
结果表明：月桂酸铅具有良好的抗磨性能、一定的减摩性能和中等的极压性能。
The content of PTFE powder filled in the epoxy adhesive can affect the impact strength, adhesive strength, hardness and dry-wear property of the adhesive.
介绍用聚四氟乙烯粉填充于环氧胶中，研究了粉的含量对冲击强度、粘接强度、硬度、干磨性能的影响。
The evaluating approach and index of anti-wear property of rolling oils of stainless steel, hard alloy cutting oil and extrusion tapping oil were studied.
对不锈钢轧制油、硬质合金切削用油和冷挤压攻丝用油抗磨性能的评定方法及性能指标进行了研究。
The high temperature wear property of a new type precision cast hot-forging die steel was studied, and compared with that of H13 steel. The mechanism of the high temperature wear was discussed.
研究了新型精铸热锻模具钢的高温磨损性能，并与H13钢进行对比探讨高温磨损机理。
The test showed that, the acid phosphite with high chemical activity has excellent extreme-pressure anti-wear property but heat oxidation stability, anti-corrosion and anti-rust properties are poor;
试验说明化学活性很高的酸性亚磷酸酯有很好的极压抗磨性，但热氧化安定性、抗腐蚀性、防锈性不好；
Such returned tooling, test equipment and property must be fully functional and undamaged, except for reasonable wear; otherwise, Seller shall bear all costs associated with repair or replacement.
否则卖方应承担所有相关维修或更换费用.
Black tin coating was prepared by multi-arc ion plating technology and wear resistance corrosion resistance heat-proof property and absorption property of solar spectrum were also discussed.
摘要介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
The ceramic coatings on the surface of some metals can improve the shortcomings of low microhardness, poorly corrosion and wear resistance, in the same time maintain the property of the metals.
金属及其合金表面进行陶瓷化可以改善金属基体的硬度低、耐磨耐蚀性差、可加工性差等不足，并且能保证原金属材料的使用性能。
After the silk fabric was finished, the property of wash and wear was improved, and handle, whiteness, tensile strength and colour had no change.
真丝织物经整理后，洗可穿性能获得改善，且手感柔软，强力、白度及色光变化不大。
When WC content is more then 50%, spray-fusing technological property becomes worse, hardness of sprayed coating and low-stress abrasive particle wear resistance are weaken.
当w（WC）大于50%时，WC的加入使喷熔工艺性能变得极差，喷熔层的硬度和耐低应力磨粒磨损性能降低。
Study shows that quenched boron eutectic structure possesses the excellent wear abrasion property.
研究表明：硼共晶组织经淬火后，具有优良的抗磨粒磨损性能。
Fhe pattern provides good guide property and control ability, good wear resistance, long service life.
花纹具有良好的导向性能和操纵性能。耐磨性能好。使用寿命长。
Effect of microelement on the microstructure and wear resistance property of special brass have been investigated by SEM, abrasion machine etc.
利用电子探针、磨损试验机等试验手段，研究了微量元素对特殊黄铜的组织和耐磨性能的影响。
Black tin coating was prepared by multi arc ion plating technology, and wear resistance, corrosion resistance, heat proof property and absorption property of solar spectrum were also discussed.
介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
Wear and tear tests of the treated specimen are made by Brinell wear test machine, and the relation between wear rate and mechanical property is set up.
以上处理的试样经磨损试验，得到了磨损率和机械性能的一些关系。
The influence of heating temperature on morphology of eutectic carbide and impact fatigue property of low alloy wear resistant cast iron were studied by OM, SEM and impact fatigue tester.
采用金相、扫描电镜和力学性能分析方法研究了加热温度对含稀土低合金耐磨铸铁冲击韧性的影响。
The advantages of the electronic location equipments of pipeline pigging are of strong wear resistant property and passing ability, well cleaning efficiency, accurate location and tracking, etc.
本公司生产的电子定位管道清管设备具有耐磨性能强，通过能力强，清理效果好，定位、跟踪准确等优点。
They are outstanding for their hardness, density and resistance to thermal shock, wear, chemical attack and self-lubricating property.
它具有硬度高、密度高、抗热振性、耐磨性抗化学腐蚀性和自润滑性好等特点。
The effects of nitrogen on the properties of low carbon high chromium cast iron were studied by mechanical property and wear resistance test, and metallograph analysis using OM and ESEM.
通过力学性能和耐磨性能测试、金相组织观察和ESEM形貌分析，研究了氮含量对低碳高铬铸铁性能的影响。
This paper discusses the effect of heat treatment to the microstructure and wear resistance property of special brasses.
论述了热处理工艺对特殊黄铜微观组织及耐磨性的影响。
The tribological experiments showed that the Mo layer possessed a good wear-resistance and an excellent anti-scuffing property.
摩擦学实验表明，镀钼层具有良好的耐磨性和优异的抗擦伤能力。
The old materials of the bushing have some defaults including bad wear-resistance property, serious wear to the steel cable and high price.
以往的衬套材质存在耐磨性差、对钢丝绳磨损严重以及成本过高等缺点。
The foundry mould made by polyurethane abroad from aspects of mechanical property, wear-resistant condition, and technology method have been introduced.
介绍近年国外聚氨酯铸造模具材料性能，制成模具后的力学性能、耐磨性的情况以及制造聚氨酯模具的工艺方法。
The foundry mould made by polyurethane abroad from aspects of mechanical property, wear-resistant condition, and technology method have been introduced.
介绍近年国外聚氨酯铸造模具材料性能，制成模具后的力学性能、耐磨性的情况以及制造聚氨酯模具的工艺方法。
应用推荐