So, if you do not carry a USB drive on your keychain, these software programs should be encouragement enough to start.
所以，如果你的钥匙上还没有这样一个U盘，那么这些软件足以鼓动你去现在做一个。
Use a USB card reader if your host has no integrated reader.
如果您的主机没有集成读卡器，使用一个US b读卡器。
Turns out, they thought that if you stuck a flash drive into the USB port, it would automatically save the computer's backup info.
结果发现，他们总以为如果你把闪存通过USB插口和电脑进行连接，那么它就会自动备份电脑里的数据。
Unfortunately, USB cables/cradles don't work, so if your device came only with one of these, then you will need to buy one (they are widely available and reasonably inexpensive).
不幸的是，不能使用 USB线缆/支架，所以如果您的设备只附带了其中之一，那么您将需要购买一个（到处都可以找到，而且相当 便宜）。
On the other hand, very few PDAs can be configured to work as USB host devices; if you're willing to put in the time and effort, the 770 can use USB hard drives.
另一方面，很少有PDA 设备可以配置成作为USB主机设备来工作；如果您愿意花一些时间和精力，770 甚至可以使用 USB 硬盘。
It may have occurred to you that we can avoid these two problems if our BIOS supports USB or FireWire and we are booting directly.
您可能已经想到如果我们的BIOS支持USB或FireWire且我们直接引导，我们就可以避免这两个问题。
Therefore, if you are using USB on a relatively recent machine, it should be possible to boot the drive into Linux directly.
因此，如果您在相对较新的计算机中使用usb，应该可以直接在Linux中引导驱动器。
A laptop is ideal, but anything with a USB port should work, if you have a CF reader that works under Linux.
最好是一台膝上型计算机，不过如果您有一个可以在Linux下工作的CF读卡器，那么任何带有US b端口的计算机都可以工作。
Remember to quote these if you are invoking GRUB with parameters from a bash shell, for example, when installing GRUB onto a floppy, USB key, or your MBR.
如果使用这些参数从一个bashshell调用GRUB，例如，在软盘、USB 密匙或您的MBR 上安装 GRUB 时，别忘了使用引号将参数引起来。
Boot a computer with the floppy disk image (use a USB floppy drive if the computer does not have one).
用软盘镜像启动一台计算机(如果计算机没有软驱，可以使用usb软驱)。
Booting from a USB pen drive (if your workstation supports it).
从usb笔式驱动器引导这个系统(如果工作站可以支持这种方式)。
DB9M-to-USB cable (optional if your host platform has an RS-232 port).
DB9M - to - US b线缆(如果主机平台有RS- 232端口，它就是可选的)。
A floppy disk may be suitable if you only work with very small files, or a USB flash memory key may suffice for medium-sized files, but neither of these is ideal.
如果仅使用非常小的文件，可以使用软盘；对于中等大小的文件，US b闪存盘可能就足够了，但是它们都不是理想的方法。
If you're in doubt, you can use a GPT-aware partitioning tool to set up GPT partitions on a spare hard disk or a small removable disk, such as a USB flash drive.
如果您不确定，您可以使用一个支持GPT的分区工具在一个闲置硬盘或者一个小型可移动硬盘(比如usb闪存驱动器)上建立GPT分区。
Downloads are available via a USB cable, ands software on the handset pauses music if a phone call comes in.
音乐下载可以通过一个US B数据线，而且有软件可以在有电话打进来的时候暂停播放音乐。
If it fits, you can burn it to a DVD, or you can use USB Startup Disk Creator to put everything on a flash drive of the appropriate size.
要使用这个文件，你就得把它刻录在一张DV D盘片上，或者通过US B启动盘创建器，把这文件的内容装入一个足够大的U盘里。
You can buy a USB battery charger almost anywhere that sells rechargeable batteries. If you can't find it locally, Amazon has them.
你能在大多数卖充电电池的地方买到usb电池充电器。如果本地买不到，可以在亚马逊上购买。
If you are a blogger, this program is essential for your USB toolkit.
如果你是一个博主，把这个软件放到您的U盘工具包是很有必要的。
If you don't want to buy an adapter to charge via the mains, you can use USB instead.
如果你不想再买一个变压器来直接充电的话，你也是用usb接口。
If you have a Firewire port, try to use that instead of a USB port since Firewire is faster than USB right now.
如果你个人电脑上有法尔接口，那么使用法尔接口，因为它现在比usb快。
If you need to connect it to an Ethernet network you'll need a USB adapter.
你需要使用US B适配器才能将其与以太网连接。
If this happens for you, read the section about configuring the USB serial driver in the Qt Documentation.
如果出现这种情况，请阅读Qt文档中关于如何配置US B串口驱动的一节。
If your host system has no serial port, use a DB9-to-USB cable.
如果您的主机系统没有串行接口，使用DB 9 - to - USB电缆。
If more than the maximum USB ports a computer can provide are needed, a user could opt for a USB hub.
如果所需的端口比计算机所能提供的US b端口还要多，则可以考虑使用USBhub。
The simplest way of getting the data from the Arduino is with the unit connected directly to a host computer Universal Serial Bus (USB) interface, reading the data as if it were a serial connection.
从Arduino获得数据最简单的方式是让此单元直接连接到主机计算机的UniversalSerialBus (USB)接口，像串行连接那样读取数据。
If you find that USB device mounting doesn't work for your installation (it should, so try it first), give the following a shot.
如果安装完毕后usb设备并不能正常挂载的话(正常情况下可以，所以先要试一下)，就试一下下面这种方法。
Note that if your project does not require a hard disk, as is the case for many thin clients, it must boot via CD, USB, or Preboot eXecution Environment (pxe-that is, network boot).
注意，如果您的项目不需要硬盘(许多瘦客户机就属于这种情况)，则它必须通过CD、u SB或Preboot eXecutionEnvironment (PXE—也就是网络)来启动。
Note that if your project does not require a hard disk, as is the case for many thin clients, it must boot via CD, USB, or Preboot eXecution Environment (pxe-that is, network boot).
注意，如果您的项目不需要硬盘(许多瘦客户机就属于这种情况)，则它必须通过CD、u SB或Preboot eXecutionEnvironment (PXE—也就是网络)来启动。
应用推荐