• Market share had declined precipitously under Smith, falling from 43.5% to 33.5% and the company belatedly was cutting capacity to compensate.

    在史密斯治下,公司的市场份额急剧下跌,从43.5%跌至33.5%,而公司却没有及时削减产能以弥补损失。

    youdao

  • The EU is responsible for only 14% of the total;its likely commitment would also involve cutting no more emissions than it is already bound to under European law.

    欧盟只占总排放的14%,他们可能的承诺也只是保证不会超过根据现有欧洲法律规定的排放值。

    youdao

  • The EU is responsible for only 14% of the total; its likely commitment would also involve cutting no more emissions than it is already bound to under European law.

    欧盟只占总排放的14%,他们可能的承诺也只是保证不会超过根据现有欧洲法律规定的排放值。

    youdao

  • By cutting carbon dioxide emissions as well as controlling soot and methane, the global temperature change could be kept under 2 degrees Celsius (4 degrees Fahrenheit) in the short term.

    就短期来看,在减少二氧化碳排放量的同时控制烟灰和甲烷的排放将使全球气温变化控制在2摄氏度(4华氏度)以内。

    youdao

  • Under the conditions of permission of glass processing quality, the high cutting speed and suitable external load should be selected.

    在玻璃加工质量允许的条件下,玻璃制品孔加工宜选择高的切削速度、适当的外加载荷。

    youdao

  • Under dry cutting state, tool life is affected mostly by cutting depth.

    在干切状态下,切削深度对刀具寿命影响最大。

    youdao

  • Rock cutting by a step ped bit has been studied with experimental stress analysis and is tested under atmospheric pressure.

    本文用平面光弹方法,对阶梯金刚石钻头切削刃下岩石的应力进行分析。

    youdao

  • With the increase of cutting depth, under the impact of abrasive particles with a large Angle, an oblique stripe deformation of the grinding zone are formed.

    随切深的增加,材料在磨料粒子大角度冲击下形成斜条纹状的变形磨削区。

    youdao

  • The analyzing method of grey relativity is used for identifying main error sources under different cutting conditions, and these results are verified by experiments.

    采用灰色关联度分析方法识别不同切削条件下的主要误差源,并进行了实验验证。

    youdao

  • The formation of the fatigue cracks and the thermally induced cracks are mainly responsible for the failure of the ceramic tool materials under various cutting conditions.

    在不同的切削条件下,疲劳裂纹和热裂纹是造成刀具材料失效的主要原因。

    youdao

  • With the mathematic derivation it is proved that the cutter meets the specification of the gear meshing under the cutting condition and can correctly shape gears that can meet the design requirement.

    通过数学推导,证明了该刀具在切削工况下符合齿轮啮合原理,可切制出满足设计要求的齿轮。

    youdao

  • The usage status of cutting fluid can be observed directly by iron spectrometer under a suitable test condition.

    在合适的试验条件下,还可利用铁谱仪直观地了解切削液的使用状态。

    youdao

  • The results show that continuous chip is formed under relatively lower cutting speed, while serrated chip is formed under higher cutting speed.

    结果表明,较低切削速度下形成连续带状切屑,而高速切削时形成锯齿形切屑。

    youdao

  • On the multifunctional testing device, the cutting test under coupling dynamic and static loads were conducted on mortar and granite block.

    在自行研制的动静态多功能岩石破碎试验台上,以砂浆块和花岗岩为试验对象进行了冲击-静压切削破岩试验。

    youdao

  • One day I saw an envelope that had been slipped under my apartment door; the telephone company was cutting off my service for nonpayment.

    一天,我看见从我房门下面塞进来了一个信封:电话公司因为我没交费要掐我的电话了。

    youdao

  • Noise value, noise power, noise voltage, vibration power and amplitude vibration were measured under different cutting parameters of technology and frequency spectrum analysis was also made.

    在不同的锯切工艺参数和锯片结构下,测量了噪声值、噪声功率、噪声电压、振动功率和振动幅值,并对其进行频谱分析。

    youdao

  • The application of controlled blasting technology in road cutting under complicated environment in one Railway is introduced.

    结合某铁路建设的工程实例,介绍了控制爆破技术在复杂环境下进行路堑开挖中的应用。

    youdao

  • The article discusses the means and method of numerical control programming under the background that spark erosion wire cutting is applied extensively.

    探讨在电火花线切割得到广泛应用的背景下,电火花线切割数控编程的手段和方法。

    youdao

  • Results show that under small Mach number the main source of discrete noise is the fluctuating force, which gives a guide for cutting discrete noise down.

    研究表明,低马赫数情况下叶轮离散噪声主要是由脉动力造成,为降低低马赫数下的叶轮离散噪声提供了参考。

    youdao

  • Under-water oxygen-arc cutting technology is easy for operation and widely used.

    水下氧弧切割技术是一种方法简单,应用广泛的技术。

    youdao

  • Crack-free surface that is formed in ductile regime of glass can be obtained under conventional cutting conditions if the tool parameters are chosen properly.

    如果刀具参数选取得当,能在常规切削用量下获得在玻璃的塑性域内形成的、无微裂纹的加工表面。

    youdao

  • Therefore, it is put forward herein that high seepage pressure exists locally in the rocks when under jet action, and the magnitude of seepage pressure greatly affects the rock cutting results.

    为此,提出了射流作用下岩石局部范围具有较高渗流压力的思路,并认为该渗流压力大小对射流的破岩作用有重大影响。

    youdao

  • With theoretical analysis and experimental research, the regularity of wear cumulation of carbide tools under varying cutting speed conditions is studied.

    通过理论分析和试验研究,探讨硬质合金刀具在变速切削条件下磨损累积的规律。

    youdao

  • To make measure and research on the infrared hot image in the deformation and destruction course under the function of pick cutting in order to analyze the deformation and destruction law.

    对截齿截割煤体变形破坏过程的红外热像进行测量和研究,从而分析研究截齿截割作用下煤体变形破坏规律。

    youdao

  • In this article, the natural frequencies of machine tools under continuous cutting and steady non-continuous cutting conditions are identified with time series method.

    本文用时间序列分析的方法,在机床连续切削和非连续平稳切削状态下识别机床的固有频率。

    youdao

  • They are aimed at cutting needless deaths in childbirth, improving kids' life chances by getting millions more into school, eradicating hunger and reducing the number of deaths in children under five.

    目标直接针对减少分娩死亡,以增加数百万儿童上学的方式为他们创造生活机会,根除饥饿,降低五岁以下儿童的死亡率。

    youdao

  • Edge Sharpening: Tips and techniques for cutting transitional edges on geometry under subdivision.

    边缘锐化:用于在分割下切削几何体上的过渡边缘的提示和技术。

    youdao

  • Optimization of cutting path in complex shape machining of CNC machine tools under high speed and accuracy condition is a crucial problem.

    走刀轨迹的优化对复杂型面的高速高精度加工起着十分关键的作用。

    youdao

  • Optimization of cutting path in complex shape machining of CNC machine tools under high speed and accuracy condition is a crucial problem.

    走刀轨迹的优化对复杂型面的高速高精度加工起着十分关键的作用。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定