Strip Miner I and Ice Harvester I blueprints have been seeded on the market. Large Energy Transfer II BPO material requirement includes the required Large Energy Transfer I module.
单级采矿器I以及冰矿采集器I将继续在市场上出现。大型能量转移装置II原始蓝图的需求将包括大型能量转移装置I模块。
Contrastive simulation research on heat - transfer factor, friction factor and fin structure of offset strip fin heat exchanger affect heat - transfer property by compiling computer programs.
采用计算机编程对错位翅片型板翅换热器的传热固子、摩擦因子及翅片结构对传热性能影响进行了数值模拟对比研究。
By applying the transfer matrix method to the finite strip method the more simultaneous frequency equation is thus simplified to a two-frequency equation problem.
此法是将有限条法与传递矩阵法结合使用，一般能将频率方程压缩到二阶，对于变厚板显得更为有效。
Drum drying is a continuous operation process to heat and dry materials or strip shaped materials attached on external wall of the drum by heat transfer method when the drum is rotating.
转鼓干燥是通过转动的转鼓，以传热的方式，将附在转鼓外壁的物料或带状物料进行加热干燥的一种连续操作的过程。
The strip cooling rate with hydrogen and hydrogen plus water spray on continuous annealing line is estimated according to the heat transfer principle.
利用传热学原理估算了带钢连续退火生产中采用氢气和氢气加雾化水冷却介质的冷却速度。
The numerical simulation method was used to study the heat transfer and temperature distribution of rolling piece during hot strip rolling.
采用数值模拟方法研究了带钢热轧区轧件传热和温度场分布规律。
Through controlling chip curl based on the continuous strip chips, the flat straight fins were processed to improve the fins' heat transfer capability.
通过控制基于连续的切削片的卷曲情况：把切削片处理成直而平的翅状切削片，来提高切削片的热传递能力。
The result shows that the offset strip fin heat exchanger is a new - type and high - efficiency exchanger which is higher heat transfer efficiency, more compact and more saving material.
结果表明，错位翅片型板翅换热器是一种传热效率高、占用空间小、节省材料的新型换热器。
The box transfer story can be simplified into wall model of common girt strip, beam model of common girt strip and open-frame girder model of compound beam according to different project situations.
根据工程情况不同，可将箱形转换层简化为普通肋梁墙模型、普通肋梁梁模型和组合梁的空腹桁架模型。
The relational expression of natural convective heat transfer of isothermal vertical strip was found.
以条宽为特征量，得出了竖窄条自然对流换热关系式。
For the model of laminar cooling control of hot rolled strip, the accuracy of coiling temperature control is unsatisfactory because the heat transfer in the strip itself is ignored.
在热轧带钢层流冷却控制数学模型中，由于忽略带钢内部的热传导而使卷取温度控制精度不良。
Numerical examples are provided to show the efficiency and high accuracy of the strip distributed transfer function method.
数值算例表明，条形传递函数方法具有很高的计算精度。
When the vibration of strip was feeding with the liquid steel, the flux may be subsequently involved in, so a numerical simulation of heat transfer was researched.
当振动钢带喂入钢液时，保护渣有可能随之卷入，为此开展了传热数值模拟研究。
The production capacity of hot rolled wide strip has already meet the need in China, even maybe overplus. The transfer rate of hot rolled wide strip into cold rolled one and coated sheet is small.
指出我国热轧宽带钢生产能力已能满足国内需求，并可能出现过剩，但转化为冷轧板带和涂镀层板比例太低。
In this paper the Finite Strip-Transfer Matrix Method has been used to analyse the transversely hinged plates subjected to vertical loads.
本文提出计算竖向荷载作用下横向铰接板的有限条传递矩阵法。
It features that extraction liquid, strip-extraction liquor and raw material liquid flow in different layer, so resulting in short path of mass transfer, uniform film phase and high separation effect.
本发明装置可使萃取液、反萃取液和料液分别在不同层间流动，传质路径短，膜相均匀，分离效果好，适当组合的基本单元可构成具有工业实用性的系统装置。
Air side heat transfer and fluid flow characteristics of slotted fin surfaces with arc-type and X-type strip arrangement in a pressurizing air cooler were studied by visualization experiments.
对附带亲水层和没有附带亲水层的开缝翅片管换热器在析湿工况下的空气侧特性进行了实验研究，分析了亲水层对空气侧换热和压降特性的影响。
Air side heat transfer and fluid flow characteristics of slotted fin surfaces with arc-type and X-type strip arrangement in a pressurizing air cooler were studied by visualization experiments.
对附带亲水层和没有附带亲水层的开缝翅片管换热器在析湿工况下的空气侧特性进行了实验研究，分析了亲水层对空气侧换热和压降特性的影响。
应用推荐