This system has such advantages as high precision, high performance, real-time etc.
该系统精度高，性能稳定，实时性强。
The suitable process system, such as calcination temperature and calcination time etc. has been found out.
摸索出合适的煅烧温度、煅烧时间等工艺制度。
Suitable for high tension stretching, large size screen plate, multi-plate stretching at the same time etc.
适合高张力绷网，大型网版，多网版同时绷网等。
This machine has many advantages, such as constant operation, low noise, high loading coefficient and short mixing time etc.
该机还具有运转平稳、噪音低、装载系数高、混合时间短等优点。
Saturated water coal mixture is controlled by multiple factors such as water source, coal feature, potential energy and time etc.
水煤体是在水源、煤性、位能和时间等因素的综合作用下形成的处于饱和状态的水、煤混合体。
This paper gives a theoretical analysis about the hit energy, flight time, delay time etc. of the electromagnetic parts of a line printer.
本文从理论上对行式打印机电磁铁部件的击打能量、飞行时间和滞后时间等问题，进行了分析计算；
Experimental results indicate that this system has some advantages such as small size, reliable detection ability and long service time etc.
实际运行结果表明，该系统具有体积小、检测能力强和寿命长等优点。
The baseline information of the patients, such as gender, age, weight and operating time etc. , was similar between the two groups (P > 0.05).
两组患者性别、年龄、体质量、手术时间等基线资料基本相似（P>0.05）。
The optimum sampling conditions were investigated, including the polarity of fiber coating, sample amount, equilibrium temperature and time etc.
探讨了最佳的取样条件（包括不同极性涂层的纤维头、样品量、平衡温度、平衡时间等）。
This paper briefly describes the cost-effectiveness analysis in respect to its conception, evaluating index, method, procedure and operating time etc.
本文对成本-效用分析的概念、评价指标、方法、步骤和运用的时机等进行了概括性的阐述；
The influence of the molar ratio of n-amyl alcohol and acetic acid, the quantity of the catalyst, the reaction time etc on the ester yield was discussed.
探讨了醇酸物质的量比、催化剂用量、反应时间等因素对酯收率的影响。
In this paper, Beijing drive cycle for city bus was obtained through investigating, logging and abstracting parameters such as vehicle speed and time etc.
通过随车调查、记录车速、时间等参数，抽象出北京公共汽车循环工况。
This paper explores the feasibility of ultrasonic technology leading to produce fire-retardant wood and test conditions such as frequency, sound intensity and time etc.
探讨了超声波应用于木材阻燃浸渍处理过程的可行性，同时讨论了超声波试验参数频率、声强、辐射时间等的选择。
The effect of corrosive factors (current, voltage and time etc. )on the result of AC electrolytic corrosion of PM iridium specimens in a suitable corrosive is discussed.
探讨了在适当的腐蚀介质中，对粉末冶金铱材样品进行交流电解腐蚀时，腐蚀因素（电流、电压、通电时间等）对腐蚀效果的影响。
The important parameters such as pressing powder pressure, pressing speed and holding pressure time etc, will affect directly the quality of initiating explosive device.
压药压力、加压速度、保压时间等重要工艺参数都直接影响其质量。
This system can approximately simulate the extrusion process and calculate the output of the extruder, brimming length along the axis of screw, materiel settling time etc.
本系统能近似地模拟挤出过程，并预测挤出机的挤出产量、物料沿螺槽的充满长度、物料的停留时间等。
Some characteristic parameters, the maximum explosion pressure, maximum rate of pressure rise and explosion time etc, can be tested exactly by using this experiment system.
根据标准设计了一套哈特曼粉尘爆炸实验装置系统，实现了对最大爆炸压力、最大压力上升速率和爆炸时间等粉尘爆炸特性参数的实验研究。
Meanwhile, in the case of the change of foundation thickness, the law of seepage amount, sand ring diameter, piezometric head, piping breach time etc were respectively explored.
同时，在坝基厚度改变情况下，分别探索了渗流量、砂环直径、测压管水头、管涌破坏时间等的变化规律。
The influence of the technical parameters, including magnetic strength, working gap and machining time etc. on the result of magnetic abrasive finishing is analyzed through experiment.
通过实验，分析了磁感应强度、工作间隙、加工时间等工艺参数对研抛效果的影响。
According to the effects of phosphating temperature and time etc. on the phosphating quality, the clean ferric-system phosphating mechanism and its application technology are discussed.
依据磷化温度、时间等工艺参数对磷化质量的影响，探讨了清洁铁系磷化过程的机理及应用技术。
The factors that impact the reburning effectiveness are analyzed, such as the natural gas percentage of boiler heat input, air stoichiometry, reburn zone temperature and residence time etc.
研究分析了天然气再燃效果的影响因素：包括天然气投入的比例、空气的化学当量比、再燃区的温度、烟气在再燃区的停留时间等。
This article introduces the method of humidity control used with Philips humidity-sensitive capacitance sensor, and the basic principle, measuring circle, work frequency, response time etc.
本文介绍了飞利浦湿敏电容传感器进行湿度控制的方法，包括它的基本原理、测量电路、工作频率、响应时间和滞后现象。
Research progress in influencing factors of properties of nano-filler ECAs, such as content, size, shape, surface state of nano-fillers, curing temperature and curing time etc, was reviewed.
从纳米填料含量、粒径、形状与维度、表面状态、固化温度与固化时间等方面综述了纳米填料导电胶性能影响因素的国内外研究进展；
She has well performed in many plays including New Butterfly Dream, Lan-ke Mountain, Brrowing Tea, Perfect Time, etc.
她在《新蝴蝶梦》、《烂柯山》、《思凡》、《借茶》和《佳期》等剧中都有出色的表演。
The quality of commercial dry Dihuang may be related closely to the production area, storage time, etc.
商品药材地黄的质量与产地及贮存时间等关系密切。
As the most important constituent of chemical sensor, chemical selective membrane directly affects chemical sensor selectivity, stability, repeating and responsive time, etc.
化学选择膜作为化学传感器中最为重要的组成部分，直接影响到化学传感器的选择性、稳定性、重现性及响应时间等性能指标。
The relationships between specific heat of PU rigid foam at low. temperature and such parameters as those of temperature, density and ageing time, etc., have been discussed.
讨论了聚氨酯硬泡沫塑料低温比热与密度、温度以及空气中存放时间等参数的关系。
The relationships between specific heat of PU rigid foam at low. temperature and such parameters as those of temperature, density and ageing time, etc., have been discussed.
讨论了聚氨酯硬泡沫塑料低温比热与密度、温度以及空气中存放时间等参数的关系。
应用推荐