Additionally due to its compression ignition without throttle loss of valve throttle, it can make a higher heat efficiency.
又由于是压缩着火而且没有节气门的节流损失，可导致高的热效率。
The load method of the system is that installing a throttle ahead of a proportional overflow valve, and the throttle can prevent the effect of the pressure impulsion upon sensors and meters.
本论文所述系统的加载方法是在比例溢流阀前装一个节流阀，利用节流阀来阻止溢流阀产生的压力冲击对传感器及仪表的影响。
Smooth operation of throttle linkage and throttle body air valve.
节流连杆和节流体空气阀的平稳操作。
A throttle valve control device is composed of a stator core with a solenoid and a rotor carrying a throttle valve.
一种节流阀控制装置，包括一个带螺线管的定子铁芯和一个带节流阀的转子。
The author introduces the structure and working principle of this throttle and elaborates the initializing process of the throttle and the accelerator position sensor.
本文介绍电子节气门系统的结构和工作原理，并对电子节气门和加速踏板位置传感器的初始化过程进行说明。
Adiabatic throttle coefficient is used to denote adiabatic throttle effect of real gas.
实际气体的绝热节流效应通常用绝热节流系数来表示。
Three types of throttle governing circuits used speed control are analyzed: the entrance throttle governing circuit, the out throttle governing circuit and the bypass throttle governing circuit.
本文对三种采用调速阀的节流调速液压系统进行分析和研究，即进口节流调速、出口节流调速和旁路节流调速系统。
The TPS contains potentiometer, connected directly to the throttle Shaft to sense the throttle position.
TPS包含电位计，与节气门轴直接相连，读取节气门位置。
The article analyses two throttle speed regulation hydraulic system and presents the control method to in line throttle speed regulation hydraulic system.
分析了两种节流调速液压系统，提出了进油路节流调速系统的控制策略。
Construction and work principle of electronic throttle are introduced in detail, an electronic throttle detection system based on PCI-1712 data acquisition card is designed and realized.
介绍了电子油门的结构与工作原理，设计并实现了基于PCI- 1712数据采集卡的电子油门检测系统。
This paper introduces the connection of speed servo adjusting unit and the throttle, simplifies the control circuit of the manual throttle and offers two practical methods of speed testing.
介绍伺服调速及油门机构的连接，简化手油门控制电路，给出两种实用的测速方法；
The exhaust valve (5) for engine brake switches the throttle element into an opened position from a throttle position.
排气气门(5)为了发动机制动借助于开到节流位置的节流元件可转换到一暂时打开的位置上。
The application and working process of throttle valve in injection mold of unbalanced cavities were introduced, and the key points of designing throttle valve was analysed.
介绍了节流阀在非平衡型腔注射模中的应用及模具工作过程，并分析了节流阀的设计要点。
Throttle body. The throttle body is the part of the air intake system that controls the amount of air flowing into an engine's combustion chamber.
节气门体，同时就节气门体的进气系统的一部分，控制适当的气流流动到发动机的燃烧室。
An air duct will mount to the Throttle body assembly air intake snout. The snout lip dimensions are defined on the Throttle body assembly outline drawing.
气管加装在风门装配进气口上。进气口尺寸如风门装配轮廓图所示。
Points action principle divide into hand throttle and Hydraulic throttle.
按动作原理分为手动节流阀和液动节流阀。
The throttle adjustment module increases an opening of a throttle valve during the coasting event.
节气门调节模块在所述滑行事件期间增大节气 门的开度。
The dimensions of the Throttle body assembly are defined on the Throttle body assembly outline drawing.
风门装配的尺寸如风门装配轮廓图所示。
Throttle displacement sensor will deliver the throttle opening signal to throttle control unit, forms the displacement control in closed loop.
节气门位置传感器则把节气门的开度信号反馈给节气门控制单元，形成闭环的位置控制。
The Throttle body contains bearings for mounting the Throttle Shaft across the bore.
节气门体包含横跨镗孔、用于安装节气门轴的轴承。
The standard throttle according to the utility model can settle the problem that the throttle of different positions and positive and negative throttle can not be replaced at root.
本 实用新型可以从根本上解决不同地点风门及正反向风门不能相互替换的难题。
Points function can divide into a needle shape can transfer throttle, Tube of shape can transfer throttle.
按功能可分为针形可调节流阀、筒形可调节流阀。
An overly enthusiastic prod of the throttle sends the car leaping forward - holy cow that throttle is so sensitive!
我稍微下踩了一下油门，车子突然猛烈得向前窜了出去，我的老天呀，这车油门也太敏感了吧！
Resistance of the carburetor throttle control drawbars resistance throttle.
阻风门拉杆控制化油器的阻风门。
Throttle flange is used for throttle installation; it's welded on the main air intake pipe of engine to connect with throttle.
节气门安装法兰主要用于节气门的安装，节气门安装法兰焊接在发动机的进气总管上方以方便节气门和发动机的进气总管的连接。
The utility model provides a throttle implementing mechanism of an engine test bed, which includes a motor, a pull block that can pull the engine throttle is fixed on the rotating axis of the motor;
本实用新型提供一种发动机试验台的油门执行机构，包括电机，该电 机的转轴上固定有可牵拉发动机油门的拉块；
The result shows that the control system of electronic throttle had good following characteristic and realizes position control of electronic throttle. The system will benefit the automotive...
实验结果表明，该电子节气门控制系统具有良好的跟随特性，实现了节气门系统的位置控制，为提高汽车的动力性、经济性、排放性打下了基础。
The Throttle body assembly will mount to the manifold snout and intake manifold interface dimensions are defined on the Throttle body assembly outline drawing.
节气门体总成安装在歧管口，进气歧管接口尺寸如节气门体总成轮廓图所示。
Auto-Start function (ATS):A pre-set throttle position, less than full throttle, to be used for the initial acceleration off the line without having wheel spin.
自动启动功能（ATS）：预置一个油门位置（油门不要打满）以用于初始加速，不上线而车轮处于停转状态。
Auto-Start function (ATS):A pre-set throttle position, less than full throttle, to be used for the initial acceleration off the line without having wheel spin.
自动启动功能（ATS）：预置一个油门位置（油门不要打满）以用于初始加速，不上线而车轮处于停转状态。
应用推荐