Three-dimensional flow simulation of mixing blocks in a conical twin screw extruder is performed with a fi nite element package, ANSYS.
利用A NSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
Three-dimensional flow simulation of flight element in mixing zone of a conical twin-screw is performed with a finite element package, ANSYS.
用ANSYS有限元分析软件对锥形双螺杆螺纹元件流道的流场进行了三维模拟。
Three-dimensional flow simulation of mixing zones in a new conical twin screw extruder with mixing blocks is performed with a finite element package, ANSYS.
利用ANSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
There is a difference between the numerical simulation results of two-dimensional and three-dimensional flow field in supersonic inlet, which shows the influence of boundary layer on the side wall.
超声速进气道的三维流场数值模拟结果与二维数值模拟结果存在较明显的差别，说明进气道侧壁附面层的影响不容忽略；
This paper does research on the three dimensional turbulent flow fields of compressible air with highly rotation, using methods of mathematical analyze and CFD simulation.
本文以涡流管内可压缩气体三维强旋转湍流流场为研究对象，采用数学分析和数值模拟方法对涡流管内流场结构进行研究。
We parallelized LM_NS3D, a program for three dimensional low mach flow simulation, with PVM as the message passing environment. Communication is carefully optimized. Data locality is achieved.
以PVM为消息传递支持软件实现了低马赫数流动三维数值模拟程序LM_NS3D的并行化，考虑了通信优化、数据局部化及负载平衡等。
To decrease the effect of compression wave, the numerical simulation of a three-dimensional viscous flow induced by a high-speed train entering tunnels with a shaft was made.
为了降低噪声的影响，对高速列车穿越带有竖井的隧道时产生的压缩波进行了三维粘性流场数值模拟。
The numerical flutter analysis system was formed by the three-dimensional numerical simulation of the vibrating cascade flow combined with the structural dynamics analysis of vibrating blade.
将振动叶栅三维流动数值模拟与振动叶片结构动力学分析相结合，建立了叶片颤振数值分析系统。
Numerical simulation of three-dimensional, steady, isentropic, non-symmetrical flow in rocket nozzles is completed using a bicharacteristic method.
利用特征线方法数值模拟了双圆弧和抛物线两种特型喷管中的三维非对称定常等熵的超音速流场。
Based on aquifer characteristics, boundary condition and groundwater flow regime, the hydro geologic concept model and the three-dimensional groundwater flow simulation mathematical model was built.
并对含水介质结构、边界条件及地下水流态进行了研究，建立了水文地质概念模型，构建了三维地下水流数学模型。
The numerical simulation has been carried out to investigate the three dimensional viscosity flow in the compressor cascades with curved blades of different types of stacking lines.
本文采用拟压缩性方法对不同积叠线弯曲叶片压气机叶栅内三维粘性流场进行了数值模拟。
The main object is to study three-dimensional physical character of gas-solid flow past a circular cylinder by using direct numerical simulation method.
本文首先采用直接数值模拟方法研究了三维气固两相绕圆柱的物理特征。
The three-dimensional simulation model of the spiral inlet duct of a diesel engine is created with the FIRE software, and CFD simulation of inlet flow is carried out.
利用FIRE软件建立了某柴油机螺旋进气道的三维仿真模型，对进气流动进行了CFD模拟计算。
By using CFD software FLUENT, numerical simulation for the three-dimensional flow of air between honeycombed plate heat transfer components is carried out.
应用CFD软件FLUENT对蜂窝板传热元件板间空气的三维流动进行了数值模拟。
The numerical simulation for the three dimensional turbulent flow field of multiply jets mixing with a confined crossflow in cylindrical duct is presented in this paper.
对多股射流与圆柱管中的横流湍流混合的三维流场进行了数值模拟。
A numerical simulation of the three-dimensional steady flow field in the whole flow field, from the inlet of the collector to the outlet of the diffuser, a 2k70 axial-flow fan is performed.
针对2k70型轴流式通风机从集流器进口到扩散器出口的内部三维全流场做了定常的数值模拟。
A comprehension simulation to the three dimensional flow field and temperature field in the mould of slab continuous casting was performed with finite element software ANSYS.
利用有限元软件A NSYS模拟计算板坯结晶器内三维流场和温度场。
A three-dimensional numerical simulation on centrifugal fan is conducted with FLUENT in order to investigate the inside flow field.
利用FLUENT对离心风机蜗壳内部流场进行三维数值模拟，得到其流动特征及容积损失情况。
The numerical simulation for a three-dimensional curved duct flow was carried out by means of the large eddy simulation (LES).
本文应用湍流大涡模拟方法对三维空间的弯管流进行了数值模拟。
Based on the numerical simulation method, frequency spectrum analysis and structure analysis were conducted for the three dimensional unsteady flow inside the compressor rotor.
通过数值模拟，对一个低压压气机转子的非定常流场进行结构分析和频谱分析。
The numerical simulation has been carried out to investigate the three dimensional viscosity flow in the compressor cascades with curved blades of different types of stacking lines.
为了改善扩压叶栅气动性能 ，采用拟压缩性方法对不同周向弯曲角度的正弯曲叶片压气机叶栅内三维粘性流场进行了数值模拟 。
The work of the first part of this paper is continued by describing the numerical simulation technique of steady state flow in three-dimensional artificial fracture network.
承接上文的工作，给出了三维裂隙网络中稳定渗流的数值解法。
At the same time calculation of the numerical simulation is carried out on the flow field of HL220 runner. Its result shows that BEM is effective on the calculation of three-dimensional flow field.
并对HL 220转轮流场进行数值模拟计算，结果表明此法是进行三维流场计算的有效方法。
At the same time calculation of the numerical simulation is carried out on the flow field of HL220 runner. Its result shows that BEM is effective on the calculation of three-dimensional flow field.
并对HL 220转轮流场进行数值模拟计算，结果表明此法是进行三维流场计算的有效方法。
应用推荐