He has had this model plane since he was eight.
他从八岁起就拥有这架飞机模型了。
This model plane is made by my uncle.
这架飞机模型是由我叔叔制作的。
This plane model miniatures the airplane.
这个飞机模型是飞机的缩影。
This aircraft has not been tested in X PLANE or flight simulator 2004 due to challenges in simulating an accurate flight dynamics CFG file model for this aircraft in question.
这架飞机尚未经过测试，在X飞机或飞行模拟器2004年由于准确模拟飞行动力学cfg桩这架飞机的文件模式的挑战。
So this paper proposes resolving schemes of data collection in wireless sensor networks of both plane model and linear model.
因此，本文针对平面模型和线性模型，分别提出了无线传感器网络数据收集问题的解决方案。
For linear model, this paper proposes a linear path based backbone algorithm. Simulation results shows system lifetime of this algorithm is improved by 12% of algorithm of plane model.
对于线性模型，本文提出了一种基于线性路径的骨干网算法，仿真实验表明该算法的系统生命期比平面模型的算法提高了12%左右。
I'm making a model plane this week.
这周我正在做一架模型飞机。
This paper use the plane strain hypothesis to build a reasonable study model of numerical simulation.
文章根据平面应变假设，建立了合理的数值模拟研究模型。
The method of this model suits not only road plane design, but also road profile design, crossing design, pipeline design, etc.
本模型的建模思想不仅适合于道路平面设计，今后还可应用于道路纵断面设计、横断面设计、管线综合等。
A heat source model, which comprises a gauss plane heat source on the top surface and a revolved gauss body heat source, was presented in this condition.
建立了该条件下的焊接热源模型，热源模型由作用在工件表面的高斯面热源和沿激光入射方向的旋转高斯体热源构成。
This system is based on OTC the AX-MV6 robot in the plane hot cutting domain, particularly in spatial hot cutting domain model application system.
该系统是基于OTCAX - MV 6机器人在平面热切割领域，尤其是在空间热切割领域的典型应用系统。
This model has considered many sorts of medium, the simulation of excavation process and construction sequence, and the semi - infinite plane of surface factor as well.
该模型考虑了多种介质、开挖过程和施工顺序的模拟以及地表因素的半无限平面等问题。
Firstly, this paper introduces the realize process of optimal sensor placement in a plane frame structure with model analysis result using finite element software ANSYS.
首先利用平面框架结构的模型实验，借助有限元软件ANSYS，利用模态分析结果，实现了基于有限元理论的传感器优化布置。
This paper deals with computation of elastic Plastic F. e. m. for this centre cracked plate by ADINA Program. The computing result for this plate of plane stress model and test result were very close.
本文论及针对这种试板，调用ADINA程序进行弹塑性有限元分析，平面应力模式下的计算结果与实际测试结果十分接近。
In this thesis, the stress intensity factors of top-down cracks caused by loading are calculated using three dimensional finite element model and compared to the results of plane strain model.
本文采用三维有限元模型分析了荷载作用下自上而下裂缝尖端的应力强度因子，并与二维平面应变模型分析的结果进行比较。
How borrows this to analyze the Chinese modern plane to design better completing to the China traditional culture art model.
借此分析中国现代平面设计如何更好的完成对中国传统文化艺术的借鉴。
The configuration and simulation model of water pulse forming line switch with prepulse suppression ground plane (PPS) were introduced in this paper.
介绍了具有预脉冲屏蔽板的水介质脉冲形成开关的结构和等效电路模型，给出模型中等效参数的计算方法。
With a continuously distributed dislocation model, this paper deals with cracks inclined to a free surface of a semi infinite plane under remote loadings.
采用连续分布位错模型讨论和分析了受远处载荷下半无限平面自由边界附近任意方位的裂纹问题。
This paper deals with computation of elastic Plastic F. E. m. for this centre cracked plate by ADINA Program. The computing result for this plate of plane stress model and test result were...
本文论及针对这种试板，调用ADINA程序进行弹塑性有限元分析，平面应力模式下的计算结果与实际测试结果十分接近。
This gives a three dimensional model which is then projected onto one plane to give a 2 dimensional graphic (See figure 3a).
这给出了一个三维模型，然后到一个飞机预计将提供一个二维图形（参见图3a）。
In this article we simplify turbine supercharger impeller as a model, which was jointed of axial symmetry entity elements and plane shell elements, for finite elements analysis (FEA).
利用循环对称条件，将增压器叶轮简化为由实体单元与平面壳体单元组合而成的有限元分析模型。
On the basis of preceding main results, a mechanic model of overburden-karstic free face with a weak structural plane is presented in this paper.
本文在总结前人成果基础上，提出存在一个软弱结构面的覆盖岩溶临空面的力学模型。
In this paper, we deducted the transform relation between seismic source parameters from seismic fault plane solution in double couple point source model and from the seismic moment.
文中推导了双力偶点源模型震源机制解得出的震源参数和用地震矩张量反演得出的震源参数之间的转换关系。
This paper deals with the heat transfer model of heating plane in AC electric heater. A solution of its temperature oscillation has been got for the purpose of the heating design.
文章论述家用交流电热器加热板的传热模型，得出其温度振荡解，供热设计使用。
This utility model relates to a pen which can write on the plane with stereovision effect, consisting of a pen point, a pen core and a pen tube.
本实用新型涉及在平面上书写出具有立体视觉效果字的笔，由笔尖、笔芯和笔管三部份组成。
This utility model relates to a pen which can write on the plane with stereovision effect, consisting of a pen point, a pen core and a pen tube.
本实用新型涉及在平面上书写出具有立体视觉效果字的笔，由笔尖、笔芯和笔管三部份组成。
应用推荐