It's not normally employed to form thermoplastics.
这不是通常采用的形式热塑性。
Pearlescent Pigment luster almost apply to all thermoset and thermoplastics.
添彩珠光颜料几乎适用于所有热固性和热塑性塑料。
The processing of foamed thermoplastics has increased during the past few years.
在过去的几年里，泡沫热塑的加工逐步增加。
Progress of studies concerning epoxy resin/thermoplastics blendings was summarized.
综述了国内外有关环氧树脂与热塑性树脂共混研究的最新进展。
The fuselage and the wing which are made of thermoplastics are elastic and durable.
机身和机翼用热塑料制成，富有弹性，并且耐用；
Thermoplastics are generally divided into two classes: namely crystalline and amorphous.
热塑性塑料通常分为两类：即结晶质的和非结晶质的。
LUUB is easy to disperse in rubber, thermosets and thermoplastics greases and printing ink.
LUUB易于分散在橡胶，热固性塑料及热塑性塑料，油脂，油墨中。
One of many polyolefin thermoplastics. Usually in exterior quality thermoplastic powder coating.
众多的热塑性聚烯烃之一，常用于户外的热塑性粉末涂料。
Additionally, this process is used to form thermoplastics into coatings for wire, cable and cord.
此外，这一进程是用来形式热塑性到涂料的电线电缆和电线。
Much attention was paid on thermoplastics filled with plant-fibers to produce wood-like plastics.
利用植物纤维填充热塑性树脂来开发仿木塑料产品越来越受到人们的重视。
Products can be used in intumescent coating, PU rigid foam, thermoplastics and UP (unsaturated) resin etc.
所生产的阻燃剂可用于涂料、塑料、热固型树脂、纺织涂层等。
The application of thermoplastics with small hole injection molding technology in TV 's covers is introduced.
论述热塑性塑料微孔注射成型技术在电视机外壳上的应用。
The properties and applications for new veritietie were of thermoplastics elastomer are reviewed in this paper.
介绍了热塑性弹性体新品种的特性与用途。
It may also be possible to use thermoplastics (which melt when heated), instead of thermosetting plastics (which do not).
碳板材铺层自动化应该可以实现，用热塑性塑料(加热即融)代替热固性塑料(加热不融)也是可能的。
Minimum scrap loss. Runners, gates, and scrap can usually be reground. Recycled thermoplastics can be injection molded.
废料损失最小化：浇道、闸道和废料通常可以重新研磨。循环热塑性塑料可以注塑成型。
Moreover, lightweight thermoplastics due to its good performance will be applied to automobile and transportation, etc.
由于其独特的性能特点，轻质热塑性片材必将在汽车、交通等领域获得更为广泛的应用。
OB widely used in PVC, PE, PP, PS, ABS and other thermoplastics, as well as paints, inks and coatings such as whitening.
转播广泛应用于聚氯乙烯，聚乙烯，聚丙烯，聚苯乙烯，ABS等热塑性塑料，以及油漆，油墨，涂料等美白。
Impact failure, the mechanics shear failure and stress feature of the glass-fiber reinforced thermoplastics are analyzed.
分析了玻璃纤维增强塑料的冲击破坏、剪切破坏机理和应力特征。
Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints.
塑料管道系统。土壤和废料排出用热塑管道系统。粘接处密封度试验方法。
In this paper, the advances in chemorheological modeling of reactive processing for thermoplastics and thermosets were reviewed.
综述了近年来热固、热塑性聚合物反应加工过程中的化学流变学模拟进展。
Thermoplastics: Materials which have the property of softening repeatedly on the application of heat, and of hardening again on cooling.
热塑性物料：能重复的因受热而软化，冷却而硬化的物料。
Some thermoplastics have been used to modify melamine-formaldehyde resin solution and BPC-17 resin was selected as fiber-shaped agent finally.
采用各种热塑性树脂对树脂溶液进行改性，最终选定了BPC - 17树脂作为改性成纤剂。
Some limited studies have been carried out on recycling composite materials. Thermoplastics can (in principle) be readily reclaimed and remoulded.
一些有限的研究已经被执行，来回收复合材料，热塑性塑料可以(原则上)很容易被回收和改造。
Thermoplastics valves - Pressure test methods and requirements - Part 2: test conditions and basic requirements for PE, PP, PVC-U and PVDF valves.
热塑性塑料阀门。压力试验方法和要求。第2部分：聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门试验条件和。
Lower molecular weight and broader molecular weight distribution in thermoplastics favor lower orientation and reduced internal stress in moldings.
在热塑性塑料中较小的分子量以及较宽泛的分子量分布促成方向性减少同时降低注塑件中的内应力。
BASF's plastics products include from commodities to engineering and high-performance materials, and from thermoplastics to foams and polyurethane.
BASF公司的塑料产品包括从通用树脂到工程塑料及高性能的材料，从热塑性塑料到泡沫塑料和聚氨酯。
Thermoplastics can be shaped and reshaped by heat and pressure but thermosets cannot be reshaped because they undergo chemical changes as they harden.
热塑塑料可通过加热和加压成形和再成形，而热固塑料却由于在硬化过程中发生了化学变化而不能再成形。
Thermoplastics can be shaped and reshaped by heat and pressure but thermosets cannot be reshaped because they undergo chemical changes as they harden.
热塑塑料可通过加热和加压成形和再成形，而热固塑料却由于在硬化过程中发生了化学变化而不能再成形。
应用推荐