Physical insight is valuable in using the finite element method.
在利用有限方法时，物理上的观点是有价值的。
It compares the rigid limit equilibrium method with the finite element method.
比较了有限元法和刚体极限平衡法的优缺点。
The time domain finite difference and the finite element method are more convenient.
有限差分法和有限单元法在时间域里更为方便。
The finite element method was used for analysis of heat stress in chip on board(COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
At last, energy-dissipation of the KBF has been analyzed with the finite element method.
最后，用有限元方法对隅撑—支撑框架的耗能性能进行了分析。
Magnetic fluid seal structure is analyzed by the finite element method (FEM) in this article.
本文利用有限元数值计算方法对磁流体密封结构进行了分析。
In the finite element method, one of the restrictions on the approximating functions is relaxed.
在有限单元方法中，放开了定近似函数的限制。
This provides a good grounding in computer modelling and in the finite element method, in particular.
这提供了一个计算机模型，在良好的基础，特别是在有限元方法。
It is effective to apply the finite element method to transient response analysis for impact problem.
我们认为用有限元方法分析瞬态冲击问题是行之有效的。
With the finite element method, the quantity of a building of air-leaking has been analysed in nature conditions.
在实测的基础上，建立了门窗渗漏模型，借助有限单元法，对整幢建筑物在外界环境下的渗漏量进行了定量分析。
The finite element method is a very effective numerical analysis method to extremely complex engineering structure.
有限元法是分析复杂工程结构的一种非常有效的数值分析方法。
In addition, the coupling stiffness of the double rotors was successfully calculated with the finite element method.
文中还利用有限元法有效地解决了主轴双转子耦合刚度的计算问题。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
本文采用有限元方法，分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
Using the finite element method to analyze the mixing chamber, the temperature distribution as well as the change situation.
利用有限元法对混炼过程中密炼室、胶料的温度分布以及变化情况进行了分析。
We analyze the optimum result of Xiamen control airspace and put forward optimal algorithm based on the Finite Element method.
在对厦门管制区的优化结果进行分析的基础上，提出了基于有限元的优化方法。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
The finite element method has been of great use in evaluation hydrogeological environment and it will bo used very much in tho future.
有限单元法作为评价水文地质条件的有效手段，有着广阔的前景。
By some cases the finite element method has improvement at calculating precision by a long way, and it is a kind of comparatively perfect method.
通过实例计算表明，有限元法在计算精度上有了大大的提高，是一种较为完善的方法。
By using this method, the characteristics of propagation for diffused planar waveguides are calculated and compared with the finite element method.
给出了公式推导，计算了扩散各向同性及扩散各向异性平面光波导的传播特性，并与其它方法所得结果进行了比较。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
The finite element method is used to calculate and analyze the stress and the displacement of host rock when the openings is under the jet grouting support.
采用有限单元法对巷道注浆支护时的围岩应力和位移进行了计算分析。
For the plates with finite dimensions, the finite element method is used to obtain the stress distribution and stress concentration around the ovaloid opening.
对于有限尺寸板内开孔的情形，文中用有限单元法来分析腰圆形孔口的应力分布和应力集中。
The results obtained by the EFG method are finally compared with those obtained by the finite element method, concluding that the former is of greater accuracy.
将所得结果与有限元法所得结果进行了比较，发现efg法具有比有限元法更高的精度。
According to the measured results, a reasonable boundary condition can be set up and then the field distribution can be calculated by using the finite element method.
按测量结果，确定了一个合理的边界条件，用有限元法模拟计算了沿轴场分布。
In numerical computation by the finite element method it is also convenient to use the loading-unloading criteria and the constitutive equations formulated in strain space.
在有限元方法的数值计算中使用应变空间表述的加-卸载准则和本构方程也是很方便的。
Theoretical analysis is done on the static and dynamic characteristics of the structure, differential equations are presented, and it is also verified by the finite element method.
同时对机构进行了静态和动态特性理论分析，提出了机构静态和动态计算解析式，并用有限元方法对机构动态和静态特性进行了验证。
Theoretical analysis is done on the static and dynamic characteristics of the structure, differential equations are presented, and it is also verified by the finite element method.
同时对机构进行了静态和动态特性理论分析，提出了机构静态和动态计算解析式，并用有限元方法对机构动态和静态特性进行了验证。
应用推荐