The crusher claw is short and stout; the cutter claw is long and slender.
破碎机的爪子短而结实；切割机的爪子则又长又细。
Moves the cutter assembly up and down.
其控制切割装置的上下移动。
Then I'd adjust the cutter and do it over again.
然后，我想调整刀具和做一遍。
They include: 1. Model of the mixture forming in the cutter.
其内容包括：1、泥管吸口处泥浆的形成过程。
Role in human, by turning the handle to power the cutter reached.
在人力作用下，通过手柄的转动将动力传到刀盘。
The cutter in NC machining for freeform surface is studied academically.
对自由曲面数控加工中的刀具进行了较深入的研究。
The partial contour of the regenerated shape is just the path of the cutter center.
刀具中心点的轨迹就是等距形体的部分轮廓线。
The rational choice of the cutter is one of the important ways to improve green cutting process.
刀具的合理选择是提高切削加工的绿色化程度的重要途径之一。
A report from the Cutter Consortium asks Are Agile Methods and Enterprise Architecture Compatible?
一份来自CutterConsortium的报告向我们提出了这样一个问题：“敏捷方法和企业架构兼容吗？”
The cutter of the coal mining machine bears dynamic load varying with time during excavating coal.
采煤机截齿截割煤体时，截齿承受随时间而变化的动载荷。
By using it, the model of equal lead on the cutter can be applied to the cylinder, cone and sphere.
通过该模型，分别建立了柱面上、球面上和锥面上球头立铣刀的等导程螺旋线的数学模型。
In the paper, using the method of the cutter length compensation to achieve the cutter compensation.
本论文中提出了以刀具长度补偿的补偿办法来实现刀补。
The method estimating the cutter wear by analyzing the tunneling parameters is presented in this paper.
本文结合实际工程对运用掘进参数检测刀具磨损的方法进行了探索研究。
It is important for the choice of sharpening parameters and the design of sharpening equipment of the cutter.
该模型的建立为球头立铣刀刃磨参数选择及刃磨装置设计具有重要的作用。
Moreover the detection of car models' surface can also be performed if the cutter is replaced by measure top.
如果将刀具换成测量头，还可以对汽车模型进行曲面质量检测。
The cutter is directed to move along each line segment one by one in order to generate the smooth circular path.
切削是沿着每一小线段一个一个的进行以产生光滑曲线路径。
The structure and properties of the cutter produced by DC-plasma gradient metallurgy technology were investigated.
对等离子梯度冶金成型技术制备的截齿刀头组织结构与性能进行了分析。
The algorithm can be used to control the orientation of the cutter so as to avoid over-cutting in surface machining.
该算法可用于曲面加工过程中的刀具姿态控制，以避免曲面的过切现象。
Due to the amount of extreme pressure additives on high speed, into the cutter, cutter still wear, smooth surface products.
由于加进适量极压添加剂对高转速，大进刀具时，刀具仍然耐磨，制品表面光滑。
While the cutter rotating and moving at one time, and forming the medium gear, gears machining was implemented with this method.
该方法是通过刀盘一面旋转，一面平移可形成产形齿条(媒介齿条)的原理来实现的。
Adjust the stubble adjusting plate alongside the cutter according to the requirement of harvesting plant to the perfect stubble height.
根据收割作物要求调整切割器两侧割茬调整拖板，达到理想割茬高度。
The optimum link-and-inquiry method of multi-user function in the cutter standard graphic database is also discussed and studied in this paper.
进一步结合此系统对刀具标准图形数据库中多用户函数连接查询优化方法进行了探讨和研究。
He is also Director of Enterprise Architecture at the Cutter Consortium which provides research and analysis on it and Editorial Director of SOA Institute.
此外，他还是提供it研究和分析的CutterConsortium公司的企业架构主管，SOAInstitute的总编辑。
Based on the analysis of cutting chatter, the cutter body structure and parameters of special cutter for machining gear pump bodies are optimum designed.
在分析加工颤振机理的基础上，对加工齿轮泵壳体齿圈槽专用刀具的刀体结构和刀具参数进行了优化设计。
The cutter blade is a key part in the process of the staple production and has an important effect on the staple quality, cost and production efficiency.
化纤切断刀是化学短纤维生产中的关键零件，对纤维的切割质量、成本和生产效率有着重要的影响。
The developed materials through the sand slurry abrasion test have been successfully put into practice in the shell of dredging pump and the cutter piece.
研究证明，该试验机能模拟疏浚工况，已成功应用在挖泥船泥泵壳和绞刀片耐磨材料的磨损试验上。
All morning you could hear the rattle of the machine as it went round and round, while the tall grass fell down behind the cutter bar in long green swathes.
整个上午你都能听到割草机发出轰鸣声，在田地里绕来绕去，那些高高的草在它后面倒成一条长长的绿色通道。
It presents the formulae for computing the cutter location data, and introduces the approaches to deal with inspection of constraints and self - interference.
推导出刀位数据的计算公式，给出约束检验、自干涉检验等常遇问题的处理方法。
It presents the formulae for computing the cutter location data, and introduces the approaches to deal with inspection of constraints and self - interference.
推导出刀位数据的计算公式，给出约束检验、自干涉检验等常遇问题的处理方法。
应用推荐