Technological analysis is a key link in digital control process and it provides a basis for designing programme.
工艺分析是数控加工中一个十分重要的环节，它是程序编制的依据。
The paper presents the main points of technological analysis in detail drawing based on machining feature of NC-milling.
根据数控铣削的加工特点，提出零件图工艺分析的要点。
Mixing of UF-811 in filling formulation, technological analysis of extruding process and control essentials in. manufacture were discussed.
探讨了UF- 811增韧剂在填充配方体系中的混合、挤出加工过程中的工艺分析及在生产中应注意的控制要点。
A feasible process scheme was made for forming the steering knuckle of a truck based on a technological analysis on the forging of the part.
通过对卡车转向节锻件的工艺分析，制定了合理的工艺方案。
Through the technological analysis of the trimming process for the isobutylene-isoprene rubber plugs, the structure of the trimming die has been determined.
通过对丁基橡胶瓶塞切边工艺分析，确定了丁基橡胶瓶塞的切边模具结构。
Finally, starting from systematic theory, this paper makes use of technological analysis method and builds up mathematical model on equipment updating analysis.
在设备更新中，从系统理论出发，并结合实际情况，采取了技术分析方法，对设备更新进行分析建立数学模型。
Though the technological analysis of the structure of the accumulator tank , the structure and working process of the injection mould for the type of parts are determined.
通过对蓄电池槽结构的工艺分析，确定了该类制件的注射模结构、工作过程，并对其设计特点进行了介绍。
Through the technological analysis of the air condition panel, we introduced the structure principle of the stack injection mold for the air condition panel for designing the mold.
分析了空调面板框的结构特点及工艺要求，介绍了叠层式注射模的结构、工作过程以及结构设计要点。
The production of light nodular graphite iron parts with high ductility in investment casting was expounded in all aspects including both technological analysis and processing control.
对熔模精密铸造高韧度球墨铸铁小件的生产，从工艺分析到生产过程的控制进行阐述。
The advantage of the gear axis with cold extrusion technology replacing metal cutting working production are narrated, and the technological analysis for the gear axis part is conducted.
叙述了采用冷挤压工艺代替切削加工生产齿轮轴的优点，并对齿轮轴零件进行了工艺分析。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
通过对塑件工艺分析的人工神经网络模拟，建立了可供工艺优化计算的数学模型。
Bostrom: Historically, the predictions have been groundless. They have not been based on science or careful analysis of particular technological prospects.
博斯特罗姆：从历史角度来看，那些预言目前被证明毫无根据，既不是基于科学，也没有对特定的科技前景进行过谨慎分析。
He questioned the foundation of metaphysics in the analysis of technological essence, and put forward new understanding to traditional metaphysics of subject.
他在对技术本质的分析中追问其形而上学的基础，对传统主体性形而上学提出新的认识。
This text has mainly explained and weighed the working principle of the transducer, the error compensating, the main parameter choosing, and has carried on technological economy analysis.
本文主要阐述了称重传感器的工作原理、误差补偿、主要参数选择。并进行了技术经济性分析。
Major problems in roadway drivage are revealed based on an analysis of the current situation in this area, and technological solutions are recommended for the improvement.
通过对我国巷道掘进现状的分析，指出了当前存在的主要问题，进而提出了提高单进的技术途径。
The analysis of the Framework Program for Research and Technological Development is primarily concerned with the Fourth and Fifth Framework Program.
对欧盟“研究与技术开发框架计划”的分析主要集中在第四和第五个计划。
The program option, parameters, technological measures and analysis of the engineering blasting are introduced.
介绍了该工程爆破的方案选择及分析，爆破参数及工艺措施。
Third, through the interactive analysis between the technological innovation and corporate culture, the author summarizes the logic relation between the two.
第三，通过对技术创新与企业文化之间相互作用的分析，总结出二者间的逻辑关系。
The sprue with square or hexagonal section is superior to the sprue with round section for technological yield of the casting by theoretical analysis and actual verification.
通过理论分析比较并通过生产实践得出，对于铸件工艺出品率，正方形或正六边形截面的直浇道优于圆形截面的直浇道。
This article introduces the construction scheme, technological design and tech economic analysis for State Eng Research Centre of Fertilizer Catalysts.
介绍了化肥催化剂国家工程研究中心的建设方案、构成、工艺选择、技术经济分析等。
Technological and economic analysis of continuous cast products cut by four kinds of gas Flame materials has been carried out.
对切割连铸坯采用的四种主要燃气介质进行了经济技术分析。
Detail analysis of technological parameters influencing particle shape and distribution of alloy powder has been made.
对影响合金粉末颗粒形状和粒度分布的工艺参数进行了较为详细的分析。
The paper begins with the analysis of the theories of technological innovation risk and risk evaluation, and points out the importance of the measure and evaluation methods.
本文首先阐述了企业技术创新风险及其测评的一般理论，指出了技术创新风险测评方法在风险测评中的重要地位；
Analysis and studies on the main technological parameter of flat knitting machine of the flax, and their relations with wearability.
对亚麻针织横机编织工艺技术中的几个主要参数进行分析与探讨，并研究它们与服用性能的关系。
The optimal technological parameter was obtained by laser cladding experiment and metallographic structure analysis.
通过熔覆试验和金相组织分析，获得了最佳工艺参数。
Based on analysis of technological features of rare earths contained in tailings from weak-intensity magnetic separation, the dressability of rare earths is discussed.
通过对磁矿系列弱磁尾矿中稀土矿物工艺特征的研究及分析，阐述了弱磁系列尾矿中稀土的可选性。
Traditional methods for experiment design and analysis is to design orthogonal experiment first, and then make regression analysis and variance analysis to search the optimal technological condition.
传统的实验设计与分析方法为首先进行正交实验设计，然后对实验结果进行回归分析和方差分析以确定最佳工艺条件。
The optimum technological conditions were determined by orthogonal test and extreme difference analysis.
通过正交设计及极差分析法确定了最佳工艺条件。
The optimum technological conditions were determined by orthogonal test and extreme difference analysis.
通过正交设计及极差分析法确定了最佳工艺条件。
应用推荐