This paper describes and analyzes the principle of microcomputer system controlling sintering burn-through point, and provides its practical control methods and mathematical models.
本文叙述并分析了烧结终点微机控制系统的原理，提出了实用的控制方法和数学模型。
In order to facilitate the analysis and design, mathematical models of control system are established.
为了便于分析与设计，文中建立了控制系统的数学模型。
If models are created with Rational Software Modeler, a version-control system (such as Rational ClearCase) can be used to manage the model files.
如果使用Rational Software Modeler创建模型，则可以使用版本控制系统(如rationalClearCase)来管理模型文件。
The control system model consists of control strategy, sensors and actuators sub models. The control strategy is a PID controller.
控制系统模型包括控制策略、传感器和执行器模型，本文选用的控制策略为PID调节器。
The building of discrete state-space models including system noise provides a basis for the exact identification and effective control.
这种包含系统噪声的离散状态空间模型的建立，为网络化控制系统的准确辨识和有效控制奠定了基础。
The models also offer a valid tool for analyzing and designing SRM control system.
该模型为分析和设计SRM控制系统提供了一种有效的工具。
The rotor flux field-oriented vector control method is implemented basing on these mathematical models in system software. The software program flow is presented.
系统软件基于这些数学模型来实现感应电动机转子磁场定向矢量控制，并给出了软件程序流程。
Then, the structure and dynamic models of improved constant rotor speed control system using electric field method are proposed.
在此基础上，提出了改进后的球形转子电场恒速控制系统的结构和动态模型。
At the same time, two other optimal control models are formed taking nonlinear dynamic system in continuous and batch culture as state equations separately.
同时又分别以连续和间歇发酵非线性动力系统为状态方程，建立了两个非线性最优控制模型。
Proposed an adaptive network fuzzy inference system control strategy based on hierarchy structure of gait planning, which do not require detailed kinematics or dynamic biped models.
提出一种基于步态规划分级结构的自适应网络模糊推理系统控制策略，该方法不需要确定双足机器人运动学和动力学模型。
The proposed algorithms are used to detect the OPN models of AGV physical object and OCPN model of WuXi FMS real- time control system.
同时利用提出的算法，对AGV物理对象OPN模型及无锡职业学院FMS中构造的OCPN模型进行了死锁分析。
Firstly, the system models were constructed, including the structural model, the dynamic and kinetic model, the measurement model and the guidance and control law model.
首先建立末制导系统模型，其中包括拦截器结构模型、六自由度动力学与运动学模型、测量模型和制导控制律模型。
The main problems for bilinear system tolerance control are dealing with nonlinear item in the model and stabilizing all models in the same time.
双线性系统容错控制的主要问题在于处理模型中的非线性项与多模型同时镇定。
Aiming at each process characteristics of the production, it has adopted different controlling models and formed a set of the production quality control system of PVC-U double-wall corrugated pipe.
针对PV C - U双壁波纹管生产线的各个工序特点，采用不同的控制模式，形成了一套PV C - U双壁波纹管生产质量控制系统。
Based on these two models, we propose an associative search algorithm for fault diagnosis and apply it to a control system. At last, the simulation results are given out.
基于这两种模型，我们提出了一种用于故障诊断的联想搜索网络，并把它应用于一个锅炉给水装置的控制系统故障诊断上，最后给出了计算机的仿真结果。
To establish suitable mathematical models of ship's water ballast system, bilge water system and anti-rolling tanks are the foundation for control and simulation for these systems.
建立船舶压载调平系统和污水处理系统的数学模型是进行船舶调平和污水处理控制和仿真的基础。
The control law of electric braking system is researched after the mathematical models of the different parts and the whole are built correctly.
建立了全电刹车系统各部件及整体数学模型，并对系统的控制律进行了分析研究。
These models may be used for the analysis and design of simulator control system.
该模型可以用于转台控制系统设计和分析。
Model predictive control (MPC), also known as receding horizon control (RHC), is a class of model-based control theories that use linear or nonlinear process models to forecast system behavior.
模型预测控制(MPC)，也称为滚动时域控制(RHC)，是一种基于模型的控制理论，采用线性或非线性模型预测系统的活动。
According to system dynamic models, the capacity control algorithms of refrigerating system are studied.
根据模型对制冷系统容量控制算法进行了研究。
This paper introduces operation models and the test method of the steam generator level control system.
简要介绍了蒸汽发生器水位控制系统的运行方式和试验方法。
Accurate load models play an important role for power system analysis and control.
电力系统负荷模型的准确性对电力系统的分析与控制起着重要的作用。
This actuator is used only on models equipped with the standard manual temperature control system .
这种引动器仅用于装有标准手动温度控制系统的车型。
Meanwhile, it lists the system of basic parameter indexes and models of simulation control.
同时给出了基本的参数指标体系和模拟控制模型。
After being inputted, the nursing quality control system can automatically analyze the check data, conduct inspected results and modify continually nursing quality models on practical case.
录入检查表数据后能自动分析检查结果，对护理质量进行反馈控制，并根据实际检查情况不断修正护理质控模型。
We build the mathematical model of a control loading system with the skin dynamics of human hands taken into consideration, which improves the fidelity of the models.
在建立操纵负荷系统数学模型中，考虑人手皮肤动态即质量-弹簧-阻尼系统的影响，提高了模型的逼真度。
The flexible resources assignment models are convenient for equipment support command and control system to assign resources and can meet the requirements of complex equipment support tasks.
装备保障资源的柔性分配模型有利于装备保障指挥系统进行资源调度，可以满足复杂的装备保障任务对资源的需求。
The models may is a suitable to a domain of knowledge-representation and reasoning for intelligence detection, diagnosis & control etc. , in any kind of control system.
该方法可适用于各类控制系统中的智能检测、诊断及控制的知识表示及推理等领域。
A multiple models neural network decoupling controller is designed to control the multivariable nonlinear discrete time system.
针对多变量非线性离散时间系统设计多模型神经网络解耦控制器。
A multiple models neural network decoupling controller is designed to control the multivariable nonlinear discrete time system.
针对多变量非线性离散时间系统设计多模型神经网络解耦控制器。
应用推荐