The space uniformity of spontaneous emitation from the surface of sample is like that of the incident light.
从样品表面出来的自发发射的空间均匀性似乎与入射光一样。
Hardness, tensile strength, breaking elongation ratio and aging property of samples were tested and surface of sample after aging was represented by SEM.
对试样进行了硬度、拉伸强度、断裂伸长率、热老化等性能试验；对老化后的试样表面进行了SEM表征。
Along the experiment time was prolonged, the corrosion products was appeared on the surface of sample. Then the runoff effect became more aggravated, so the dynamic corrosion rate was elevated.
随着试验周期的延长，表面产生了腐蚀产物，这时冲刷作用对试样表面腐蚀产物膜的破坏更加严重，所以冲刷腐蚀速率比浸泡腐蚀速率增加。
Stereo light microscope which possesses relatively large depth of field, good performance in real-time and no breaking surface of sample, is used in stereo three-dimensional information measurement.
体视显微镜具有工作空间大、实时性高以及不损坏样品表面等优点，己用于微观对象三维立体信息的测量。
A new micro constant force displacement sensor with micro and constant measurement force is introduced. It can realize the measurement of bullet marks without damage on the surface of sample bullets.
该系统采用了一种新型的微恒力位移传感器，该传感器具有测量力小且恒定的特点，因此，可以实现对弹头表面痕迹的无损测量。
This photomicrograph was obtained by scanning a beam of electrons across the sample while a detector kept track of electrons bouncing off its surface, betraying the specimen's outer shape.
这幅显微照片是通过扫描穿过样品的电子束而获得的，同时检测器对从样品表面反弹的电子进行追踪，这些电子显示了标本的外形。
Atomic force microscopy generates very high-resolution images (about 5-nanometer resolution) by “feeling” the surface of a sample with a tiny probe tip.
原子力显微镜是运用一种微小的探针去“感受”样本表面，能得到高分辨率的影像（约5纳米的分辨率）。
Then they brought the sample back to room temperature and exposed it to an X-ray beam from the facility while using a CCD detector to record the X-rays reflected from the surface of the sample.
然后他们将样品重置于室温状态，并使其接受X射线照射，同时使用CCD检测器来记录从样品表面反射回的X射线。
This device USES a sharp point mounted on a vibrating cantilever, which scans the surface of a sample and reacts to topology and the properties of the sample to provide highly detailed images.
此设备使用尖锐点振动悬臂，它会扫描样品表面、拓扑结构和样品的属性，以提供非常详细的图像。
The same forces that create surface tension in any sample of water are responsible for the maintenance of these unbroken columns of water.
在任何水样中造成表面张力的力支持着这些不断的水柱。
And the surface beneath the sample molecule is usually metal, too, and its smooth, featureless mash of electron orbitals can camouflage the molecule lying on top of it.
在样品表面以下的分子通常也是金属的，并且它平滑的相似的电子轨道叠加能够伪装成它上面的分子。
Another factor may be the mosquito’s search for an accessible vein near the skin surface, much like that of a nurse trying multiple sites to take a blood sample.
抑或是蚊子试图通过多点测试寻找一个接近皮肤的血管，正如护士采血样时多试几个地方一样。
It is measured by placing two electrodes on the surface of the test sample, applying a potential difference between them, and measuring the resulting current.
其测量方法是将两个电极放在测试样品的表面，在电极之间施加一个电位差，并测量产生的电流。
Constructed of polystyrene with a smooth surface that provides accurate pour-outs with minimal sample loss and facilitates weighing of static-affected samples.
称量盘由表面光滑地聚苯乙烯材料制成。表面抗静电的特性最大程度地减少了样品的损失。
The sample is from the surface soil that scientists say covers a layer of ice.
科学家称上面覆盖一层冰的土壤样品是来自火星表层。
With a microscope, he observed the surface characteristics of the sample.
通过电子显微镜，他对样品的表征进行了观察。
Researchers initiated the study with the hypothesis that methods that sample the prosthesis surface should improve the diagnosis of prosthetic joint infection.
研究者假设从人工关节表面取样可能提高人工关节的诊断效率，研究以这样的假设开始。
With preheating temperature enhancing, the peak value also increase, but cooling velocity decreases, resulting from the decrease of heat conductivity of sample lower surface.
随着预热温度的提高，电阻峰值也相应增大，但是样品下表面的热导出率下降，冷却速度下降；
The influence of sample surface status on analysis results was tested, and the absorbability and enhancement between elements were studied.
考察了试样表面质量对测量结果的影响，并对黄铜中元素间的吸收增强效应进行了研究。
In photoelectric spectral analysis for a steel sample, the result depends on the condition of sample surface.
在对钢样进行光电光谱分析时，其表面情况对分析结果有直接影响。
The anodization changes of the niobium ion sample implanted to the uranium surface at different temperatures have a same tendency.
铀表面不同温度注入铌离子试样的电极化曲线变化趋势相同，均处于活化体系。
The authors think that the high temperature on polymer local surface produced by ion bombardment is the main cause of artifacts on sample surface treated by ion-etching.
本文作者认为等离子体轰击高聚物表面引起的局部高温是离子刻蚀后试样表面出现伪迹的重要原因。
This paper analyses that grinding of sample influence testing result of main element in copper alloy from three respect, emery cloth, grinding method, surface condition of sample.
本文从砂带，研磨方法，试样表面状况三个方面，分析了试样研磨对铜合金主要元素测试结果的影响。
The result show that tin is distributed on the surface of the sample made by reversing solidification, and the grain is fined, the hardness and resistivity are increased.
结果表明，在反向凝固中，锡可以分布于试样的表面，细化晶粒，提高试样的硬度，同时使电阻率升高。
XPS shows that the doping degree of PANI microtubes is higher than that of PANI bulk sample, due to huge surface area of PANI microtubes.
XPS分析表明聚苯胺微管具有比其本体试样更高的掺杂度，这是由于聚苯胺微管极大的比表面积有利于掺杂及模板孔壁阻碍了掺杂剂挥发；
Ultramicrotome makes nanoslices of a sample and a freshly cut surface is then measured by AFM.
超薄切片机可以制备用于原子力显微镜研究的纳米片层和新鲜表面。
Using this interferometer, the vibration amplitude distribution of a stainless steel sample with a rough surface have been measured.
用这个干涉仪测量了一个有粗糙表面的不锈钢片的振动振幅分布。
Possibility to dope Y2O3 particle on the surface of superalloy sample and the relationship between homogeneity and irradiation parameters of laser have been investigated by means of laser irradiation.
本文通过激光辐照的方法，研究了在高温合金试样表面掺杂Y_2O_3质点的可能性、均匀程度与激光辐照参数的关系。
Possibility to dope Y2O3 particle on the surface of superalloy sample and the relationship between homogeneity and irradiation parameters of laser have been investigated by means of laser irradiation.
本文通过激光辐照的方法，研究了在高温合金试样表面掺杂Y_2O_3质点的可能性、均匀程度与激光辐照参数的关系。
应用推荐