The application results proved that the hot coil box technique can reduce the thickness tolerance of the ends of strips and improve the quality of products in hot strip rolling production.
实践证明：在带钢热连轧生产中采用热卷箱技术可以减小成品带钢的头尾厚度公差，提高产品质量。
Cooling system of hot steel strip rolling has major effect on quality of steel strip.
热带钢轧制的冷却系统对带钢的质量起着重要的作用。
What is relevant to indexes is the vertical vibration of the plate and strip rolling mill.
而与这些指标直接相关的是轧机机座垂直方向的振动。
The research of roller eccentricity is one of the hotspot problems in study of realm of strip rolling.
对轧辊偏心问题的研究，在轧制领域一直是一个热点问题。
The proposed model can lay down a theoretical foundation for controlling strip rolling-casting process.
通过该模型的研究，可为控制带钢铸轧过程打下理论基础。
The transformation of the computer control system plays a decisive role in the hot strip rolling HAGC transformation.
在热轧带钢电动—液压厚度控制改造中，计算机控制系统的改造起着决定性的作用。
To introduce the experiment of different diameter rolling and one high driving on the four high Ni strip rolling mill.
前言： 介绍了在四辊镍带轧机上，实行“异径轧制和单辊传动”的实验。
Mill modulus control (MMC) is one of important methods in the automatic gauge control (AGC) systems of strip rolling mills.
变刚度系数是板带连轧机厚度自动控制系统中一个重要的参数。
The cold narrow strip rolling line of Xinyu Iron and Steel Co. and the main performance of new added equipment are introduced.
简要介绍了新钢冷轧窄带钢生产线改造前的情况和改造后新增主要设备的性能。
In shape theory, the three-dimensional deformation theory of plate and strip rolling is an important and difficult study content.
板带轧制的三维变形理论是板形理论研究的重点和难点。
The thin strip rolling process of 4-high strip mill is simulated and analyzed by using 3-D elastic-plastic FEM with software MSC.
采用三维弹塑性有限元法对四辊轧机轧制薄带钢的过程进行了模拟。
The numerical simulation method was used to study the heat transfer and temperature distribution of rolling piece during hot strip rolling.
采用数值模拟方法研究了带钢热轧区轧件传热和温度场分布规律。
The production of hot strip rolling is very important in steel rolling. Then the hot rolling control theory is the basic theory in hot rolling.
热轧带钢的生产在轧钢生产中占据重要的地位，而热连轧控制理论是热轧生产过程中的基础理论。
It is necessary for re-heating furnace control model to adapt and optimize in order to satisfy the requirement of hot strip rolling production.
为了满足热轧生产的需求，加热炉模型控制需要不断的适应和优化。
And so, trustworthy basis is provided for the investigation on reducing the strip breaking at weld seam by Miebach welder in cold strip rolling.
为减少米巴赫焊机焊缝在冷连轧时断带的研究提供可靠依据。
This article's based on 1370mm strip rolling technology reform of a certain precision sheet metal company. AGC system was studied in this article.
本文以某公司1370冷带轧机技术改造项目为背景，对该轧机液压厚度自动控制系统进行了深入研究。
The aluminum strip rolling experiment is performed in order to test further the capacity of hydraulic bulging roller in improving the strip shape.
为了进一步检验液压胀形轧辊改善板形的能力，进行了铝板轧制实验。
The article describes application of steering unit into cold strip rolling line, and design features and function of automatic measuring steering unit.
介绍带材纠偏设备在冷轧生产线上的应用和自动检测纠偏装置的结构特点及功能。
Compared with Bengang 1700 hot rolling mill, the strip rolling product has smaller crystal granularity, higher strength value, and lower extension rate.
从热轧产品看：与本钢1700热连轧机相比，晶粒尺寸略小，强度值略高，延伸率略低。
The main characteristics and application of developed software for flatness analysis and presetting control of cold strip rolling (FAPCSR) are introduced.
介绍自主开发的冷轧带材板形分析及预设定控制软件——FAPCSR的主要特征及工业应用情况。
The ability of shape control could be improved by the application of WRS rolls as the downstream stands in the design and renovation of hot strip rolling.
在热带钢连轧机设计及改造中采用WRS辊系作为下游机座可以增强机组的板形调控能力。
A new method-the stream surface strip element method (SSSEM) for simulating the three-dimensional deformations of plate and strip rolling process is put forward.
提出模拟板带轧制过程三维变形的一种新的数值方法——流面条元法。
The microstructure and strip rolling breakage of low nickel austenite stainless steel were observed and analyzed by optical microscope, SEM and electronic probe.
对节镍型奥氏体不锈钢冷轧断带进行金相显微观测和电子探针分析。
Setting modern cold-strip rolling mill's offset is due to mechanical restriction which keeps the stability of the roll system, and is produced by horizontal force.
现代冷带轧机的偏移距设置源于保证轧机辊系稳定性的力学约束，靠轧机辊系在负载状态下作用于轧辊的水平力来实现。
Under the width to thickness ratio 625 of strip, this paper studies the 3-dimensional stress distributions of cold strip rolling by cubic spline function finite strip method.
本文在轧件宽厚比为625的条件下，用三次样条函数有限条法研究了冷轧带材三维应力的分布问题。
This paper puts forward a new method with which the lateral displacement of metal in strip rolling process is determined through measuring frictional stresses in two directions.
根据实测两向单位摩擦力，提出了确定带材轧制过程金属横向位移的新方法。
Based on the rolling force model and field data of Baoshan steel plant, the rolling force during continuous hot strip rolling process is simulated by using the DEFORM-2D software.
应用DEFORM - 2d软件对带钢热连轧过程的轧制力进行了有限元模拟，并与宝钢轧制力模型进行了比较。
We described systematically the contents, meaning, conditions, and progress in advanced countries about integrated management of steelmaking, continuous casting and hot strip rolling.
结合我国具体情况，对炼钢-连铸-热轧一体化管理的内容、意义、条件以及国外情况进行了系统的阐述。
We described systematically the contents, meaning, conditions, and progress in advanced countries about integrated management of steelmaking, continuous casting and hot strip rolling.
结合我国具体情况，对炼钢-连铸-热轧一体化管理的内容、意义、条件以及国外情况进行了系统的阐述。
应用推荐