Part 5 takes a look at the Spring Model-View-Controller (MVC).
第 5部分考察了Spring 的模型–视图–控制器 (MVC) 架构。
Surfaces are flattened with quasi-symmetrically distributed triangle strips based on a mass-spring model.
基于质点-弹簧模型的曲面准对称化展开算法展开三角化曲面；
The drug release experiment of compression spring model with pure magnetic mechanism trigger was successful.
用纯磁力机构的压缩弹簧释放方式成功模拟了药物释放试验。
For composite staggered truss structures, the truss was simplified as two stories with lateral bracing spring model.
对于混合式交错桁架结构的稳定性，考虑了桁架层侧移刚度简化成两层带侧向弹簧的计算模型。
This paper presents two fast algorithms of mass-spring model: quasi-static simulation and direct computation method.
介绍质量-弹簧模型的准静态模拟和直接计算两种快速算法。
In this paper, the equivalent line-spring model is employed to study the dynamic stability of a rotating cracked shaft.
本文用等效线弹簧模型计算裂纹转轴的动力稳定性问题。
The solid surfaces were modeled as mica crystal and the bead spring model was used to represent the hexadecane molecules.
模拟系统采用云母晶面作为固体壁面，十六烷采用珠簧模型。
In the thesis, mass-spring model is used to represent cloth, and explicit Euler method to update system state as time evolves.
文中采用了经典的弹簧。质点模型对织物建模，并通过显式欧拉迭代更新质点状态。
Aiming at the super-elastic phenomenon, the authors proposed an improved mass-spring model based on the classic mass-spring model.
针对存在的超弹性现象，提出了改进的质点—弹簧模型。
A two-step damage identification method of cracked beams is proposed based on the kinetic energy density and the bending spring model.
基于动能密度和弯曲弹簧模型，提出了裂纹梁损伤识别两步法。
Vertices and edges on the triangulated surface are abstracted into a mass-spring model which is used to control the shape of triangles.
三角化曲面上的网格顶点和网格边被抽象为质点-弹簧模型，用来控制网格形状。
The stress intensity factors of multitudinous arbitrarily distributed coplanar surface cracks are solved by using the line - spring model.
采用线弹簧模型求解多个共面任意分布表面裂纹的应力强度因子。
This sets a system-wide property, which is read by the factory class used to switch between integration implementations, this time using the Spring model.
此文本将设置一个系统范围的属性，该属性可被工厂类读取，用于在集成实现之间进行切换，此时使用Spring模型。
The objective function was described by artificial spring model and dummy load method and the sensitivity was analyzed by the adjoint sensitivity analysis method.
通过人工弹簧模型和虚拟载荷法描述柔性机构设计的目标函数，采用伴随敏度分析法进行了敏度分析。
The lining structure of the Yellow River crossing tunnel is analyzed, the results of the beam and non linear spring model are compared with those of other models.
应用梁非线性弹簧模型对穿越黄河隧道一次衬砌结构的受力进行了分析。
Cloth simulation is one of the important problems in apparel CAD and computer graphics. This paper presents a cloth simulation method based on a mass-spring model.
布的计算机模拟是服装CAD和计算机图形学中的一个重要研究课题，该文提出了一种基于质点-弹簧模型的布模拟方法。
In the paper, a shear spring model is proposed to simulate the constraint of the soil. Based on this model, the theoretic formula of pile head stiffness is derived.
本文提出的用模拟桩周土约束的剪切弹簧模型来计算单桩刚度，并推导出了相应的理论计算公式。
This paper studies the influence of the parametric variation of spring model on motor vehicle vibration, and analyses the characteristics of in a partial locked state.
具体研究了板簧模型参数变化对振动的影响，并对板弹的部分锁止状态进行了分析。
Non-linear dynamics characters of a rotor system for an elastic shaft-disk with a crack are examined by introducing the geometric non-linearity and equivalent line-spring model.
本文引入了几何非线性关系和等效线弹簧模型对含裂纹的弹性轴弹性盘转子系统进行非线性动力学分析。
Based on the deformation modulus from the in-situ plate loading test, the settlement of each point on the raft foundation was calculated using spring model with concentrating force.
根据原位压板试验确定的强度和变形参数计算筏板基础下地基的承载力，并采用集中力弹簧模型计算筏板各点的沉降。
This paper described the use of spring model, penalized density method and topology optimization as a synthesis tool for the design of controllable path-generating compliant mechanisms.
结合弹簧模型、变密度法和拓扑优化工具，研究了实现平面可控轨迹输出柔顺机构的设计方法。
Based on the 3D analysis result, shear models of ring joint bolt is built and shear parameters between rings needed in 2D analysis with beam-spring model can be obtained by this shear model.
然后，在对三维有限元分析结果研究的基础上，建立了环缝处的纵向螺栓剪切模型，利用该模型可以计算得到错缝拼装衬砌二维梁-弹簧模型中环间剪切弹簧的刚度；
Theoretical analyzing the Routine Method, Modified Routine Method, Multi-Hinge Ring Method and Beam-Spring Model Method respectively, and choose the appropriate design method after comparison.
分别对惯用法、修正惯用法、多铰环法和梁—弹簧模型法进行了理论分析，对比并选择了合理的设计方法。
Considering that the property of the gasbag model is similar to that of the spring model, the complex gasbag model is simplified to a general spring model in the light of the Finite Element Method.
考虑到气囊模型的特性与弹簧模型的特性相似，利用有限元法把复杂的气囊模型简化为常用的弹簧模型。
Using the single mass-spring model, we study the gaits of a hopping robot for the purpose of minimizing the loss of energy per unit distance covered and present our expressions of energy consumption.
基于单质量-弹簧模型，研究了能够使弹跳机器人单位距离能量损失最小的步态，给出了能量的消耗表达式。
Our new model is already on the stocks and will be available in the spring.
我们已着手生产新的款式，明年春天就可以上市。
Our new model is already on the stocks and will be available in the spring.
我们已着手生产新的款式，明年春天就可以上市。
应用推荐