Remove excess solder with small brush while plastic leaving a fillet around end of valve as it cools.
当焊料处于粘滞状态时，用刷子把多余的焊料清除干净。焊料冷却后，将一条嵌条环绕在阀门的端口。
Due to the consideration of environmental protection, the substitution of lead-containing solder with lead-free solder has become an inevitable trend in the 21st century.
进入21世纪，由于环境保护的要求，锡铅焊料将逐步被无铅焊料所取代。
With a nifty solder-gun and his small engraving lathe he could make an American typewriter speak 145 different tongues, from Russian to Homeric Greek.
只用一把好用的焊枪和一个小型的镌板机床，泰特尔就能让一台美式打字机说145种不同的语言，从俄语到希腊语。
Each sculptural planter is made-to-order with handmade glass and lead-free solder and comes with everything you need but the plants.
每个艺术花盆都是定制的。它们由手工制作的玻璃和无铅焊料接合而成，交付使用时，万事俱备，只欠花卉。
Equipment specifically designed for use with solder paste.
于专为锡膏设计的设备中使用。
Components required to be mounted off the board are provided with lead forms at the board surface or other mechanical support to prevent lifting of solder land.
需要离开线路板安装的组件在线路板表面利用引脚形状或其它机械支撑来防止焊盘的翘起。
The second technique involved using braided solder wick and a soldering iron with a blade tip to remove residual solder from the PCB pad.
第二个技术工艺涉及到使用网状焊料芯吸法及有刀片尖的焊接烙铁来除去PC B焊盘上的残余焊料。
The welding quality of the solder joint on the conducting wire connected with the soldering cover and the PCB.
导线在接插件焊杯内的焊点和导线在印制板上的焊点的焊接质量。
In addition, the solder mask coating on printed circuit board, with the plasma treatment, can also obtain certain roughness and high active surface, thus improving the solder coating adhesion.
另外，在阻焊膜涂覆前，用等离子体对印制电路板面处理一下，还可获得一定的粗糙度和高活性的表面，从而提高阻焊膜层的附着力。
Used with the solder wire together, soldering a stainless steel etc metal.
同锡线一起使用，焊接不锈钢等难以上锡的金属。
Joints between reinforcement members can be made satisfactorily with tin solder.
锡焊能够满意地做成加筋构件之间的接头。
Moreover, available methods of solder alloy design and tendency of test method turning to calculation method with predictable function in solder alloy design are also elaborated.
并对现有钎料设计方法以及钎料设计由试验向具有性能预测功能的计算设计方法的发展趋势加以叙述。
The valve shall be provided with solder (-US), threaded (-UT), PEX or CPVC connections.
这种阀门应该具有焊接（-US）、螺纹（-UT）、PEX或CPVC等连接端口可供选择。
RadioShack has some pretty cheap irons, though there's plenty of cursing around here whenever we have to solder something with our RadioShack special.
无线电器材公司可以买到一些很便宜的焊铁，我们用这个无线电特殊工具来焊接东西的时候，焊铁上会有很多脏污。
Use only with production equipment specifically designed for use with solder paste.
于专为锡膏设计的设备中使用。
Not with braided line relay, the load pin can not solder, not arbitrarily wrenched, two pins and rigid fixation.
不带软铜编织线的磁保持继电器，负载引出脚不能锡焊，不能随意扳动，且不能同时刚性固定两个引出脚。
With the downsizing of solder joints in microelectronic packaging, size effect in micro-joining plays an more important role in the constitutive equation of the solder joints.
随着微电子封装焊点尺寸的微型化，微连接尺寸效应对焊点的本构方程产生不可忽视的影响。
The material used for solder pot, particularly for the part with a tight contact with flow solder, should avoid direct use of stainless steel.
锡炉材料特别是与流动钎料接触比较紧密的部分应尽量避免直接使用不锈钢材料。
There is no need to field solder or to struggle with crimp pins.
没有必要到外地焊接或压接针斗争。
A semiconductor laser array with pulse power of 100w was made by utilizing the solder.
利用这种焊料研制出脉冲功率达100w的半导体激光器列阵。
The paper discusses the SMT process of solder paste printing for electronic product with high throughput and high-quality.
讨论了电子产品s MT制造过程中如何在产品高质量的基础上实现锡膏印刷的高生产量。
Lead-free solder wire is one kind of environmental-friendly product with good stability.
无铅锡线是一种环保型，稳定性很好的产品。
Lead-free solder bar is one kind of environmental-friendly product with good stability.
无铅锡条是一种环保型，稳定性很好的产品。
And the different section shape of the solder joint is given with the variation of solder volume.
给出了不同的钎料量对应的焊点剖面形态的变化。
Selective pallets shall not be used in conjunction with a no-clean wave solder process.
可选择的板不能用于免洗的波峰焊流程中。
There is no need to field solder or to struggle with a crimp pin.
无需焊接或外地奋斗的卷曲针。
The electromagnet in a wall clock may not be as readily removable, but it's a piece of cake to solder new wires to, and it will work fine with the electromagnet in place.
壁挂钟所采用的电磁体可能不容易拆除，但是钎焊上一根电线还是很容易的，而且可以随电磁体正常工作。
The electromagnet in a wall clock may not be as readily removable, but it's a piece of cake to solder new wires to, and it will work fine with the electromagnet in place.
壁挂钟所采用的电磁体可能不容易拆除，但是钎焊上一根电线还是很容易的，而且可以随电磁体正常工作。
应用推荐