Preserving gel texture during the drying step, which is one of the main problems of Sol gel process, can make drying gels have a lot of special properties and applications.
在干燥阶段维持凝胶织构可使得干燥凝胶具有一些特殊的性质和用途，也是溶胶-凝胶工艺中的关键问题之一。
A new kind of sol - gel process for preparation of dense UO2 kernels used for HTGR (High Temperature Gas cooled Reactor) has been developed in our institute.
为了制备高温气冷反应堆用燃料芯核，致密uo_2微球，研究了一种新的溶胶-凝胶工艺。
The process and mechanism of solidification of wollastonite silica sol slurry are studied.
研究了硅灰石硅溶胶浆体的固化过程及机理。
The preparative process of silica sol with natural wollastonite belonged to first origination, Natural resource was used, low cost and good economic benefit were obtained.
得出了天然硅灰石制备硅溶胶工艺属首创，能够利用天然资源，成本低，经济效益好的结论。
Detailed requirements of silicone sol and separators for gelled batteries as well as the gel-filling process were described and discussed.
论述了胶体电池用硅溶胶的具体要求，探讨了与胶体电池相适应的隔板，并对胶液的灌注过程进行了描述。
In this paper, GOD was immobilized in the course of gelation process of the sol of TEOS, and immobilized GOD columns were easily prepared with different carriers using this system.
本文利用硅酸乙酯(TEOS)的溶胶凝胶过程对葡萄糖氧化酶(GOD)进行了固定，并制备了不同载体下的GOD酶柱。
Real-time Fourier-transformed infrared spectroscopy (FTIR) was used to monitor the curing process of hybrid sol, indicating the formed imide group decreased with increasing titania content.
通过实时傅立叶红外光谱（FTIR）研究了杂化溶胶的凝胶固化过程。采用热重分析研究了杂化膜在氧气和氮气气氛下的热降解行为。
The chemical process of sol-gel technology can be divided into organic and inorganic technology according to the different raw material.
溶胶—凝胶技术的化学过程根据原料不同可以分为有机工艺和无机工艺。
The NASICON sensitive materials for ionics sensors were prepared by sol-gel process and the process was compared with the conventional ceramic process.
本文介绍应用溶凝胶工艺制备离子传感器的敏感材料NASICON，并与传统的陶瓷工艺作了比较。
Calculation method of cost and price of investment castings was given based on analysis of sol silicate mold shell investment casting process.
以硅溶胶型壳熔模精密铸造的工艺过程分析为基础，提出了铸件成本和价格的计算方法。
The structure of hair was replicated via a sol-gel process using human hair as the template.
以人发为生物模板，用溶胶-凝胶法对人发的表皮结构进行了复制。
Combined with characteristics of functional films, a photosensitive sol-gel technique, in this paper, was examined, during which the fine-patterning process of the films was taken into consideration.
本研究结合功能薄膜的特点，研究了感光溶胶-凝胶技术，在薄膜的制备过程中就考虑到薄膜的微细加工。
The sol-gel process is a method to prepare metal oxide by using alkoxy metal salt or metal inorganic salt.
溶胶-凝胶过程是是一种用金属烷氧化物或金属无机盐在较低温度的条件下制备金属氧化物的方法。
Objective: Aim of this study was to evaluate the effect of silica coating with sol-gel process on bonding strength between glass infiltrated alumina ceramic and resin luting cement.
目的：探讨利用溶胶凝胶法进行纳米硅涂层表面改性对玻璃渗透氧化铝陶瓷粘结强度的影响。
The phase transformation of xerogels during heat treatment and the process of nonhydrolytic sol-gel reaction are studied by TG-DTA, XRD and FT-IR.
应用TG-DTA、XRD和FT-IR等测试手段研究了凝胶热处理过程中的相变化以及非水解溶胶-凝胶的反应过程。
At present, preparation of hybrid material via a sol-gel process has been a hot field in material research.
采用溶胶-凝胶法制备有机-无机杂化材料是近年来热门的研究领域。
Structure evolution of both TEOS and colloidal silica in the sol-gel process was studied.
研究了正硅酸乙酯(TEOS)和硅溶胶水解聚合过程中溶胶聚合物分子的生长过程。
Fine mullite powder was synthesized by sol-gel process with tetraethoxysilane (TEOS) and aluminium nitrate as raw material.
以正硅酸乙酯和硝酸铝为原料，采用溶胶-凝胶法制备出了超细的纳米莫来石。
In this paper, a new kind of soldering technique, namely, chemical Heat-treatment sol-dering process (CHSP) is introduced.
介绍了一种新的钎焊技术，即化学热处理钎焊法，并对钎焊机理进行了探讨。
Organic-inorganic hybrids synthesized by sol-gel process usually exhibited low elastic modulus, high ductility and high mechanical strength.
溶胶-凝胶法制得的有机-无机杂化材料通常显示低弹性模量、高延展性及高机械强度。
Surface structured silica hollow microspheres were synthesized using the rape pollen grain as a biotemplate via a facile sol-gel method and a succedent calcinations process.
利用油菜花粉作为生物模板，通过溶胶在花粉颗粒表面包裹，再经高温烧结去除花粉颗粒的方法制备了具有特殊表面形貌的二氧化硅中空微球。
The method of the invention comprises a sol-gel process and a vacuum freezing drying process.
本发明采用的方法为溶胶-凝胶和真空冷冻干燥法。
Hydrophobic silica gel was prepared by sol-gel process using tetraethoxy silicone(TEOS) as raw material, then the surface was chemically modified by diethoxydimethylsilane(DDS).
以正硅酸乙酯为原料，经溶胶-凝胶过程制备二氧化硅溶胶，再利用二甲基二乙氧基硅烷（DDS）对其进行改性，制备了疏水性二氧化硅凝胶。
This paper systemically introduced the features, principle, technological process and the application of coating materials, prepared by sol gel process, looked ahead the coming developing prospect.
较系统地介绍了溶胶凝胶法制备涂层材料技术的特点及一般原理。概述了溶胶凝胶法制备涂层的工艺过程以及涂层材料的应用。展望了未来的发展前景。
Li-doped lanthanum chromite powders in stoichiometric proportions were prepared by sol-gel process.
采用溶胶-凝胶法，按化学配比将锂元素掺入铬酸镧中制得粉末。
NASICON was synthesized by using normal reagents as raw material and sol-gel process. Based on the resulted material, the solid electrolyte CO2 sensor was prepared.
以常规试剂为原料，采用溶胶-凝胶法合成了NASICON固体电解质材料，并以该合成材料为基础，制备了小型固体电解质型CO2传感器。
Sol-gel process is combined with polycationics in three different ways and the respective synergetic effect on the color fixing performance of23kinds of direct dyes is reviewed.
考察溶胶凝胶法、阳离子固色法及这3种方法的不同组合对23种直接染料固色效果的影响。
Carbon aerogels were prepared from resorcinol and formaldehyde via sol-gel process, high temperature carbonization and atmospheric pressure drying technology with solvent replacement.
以间苯二酚和甲醛为原料，采用溶胶-凝胶工艺，结合高温碳化和溶剂替换常压干燥技术，制备了碳气凝胶。
Firstly, ITO conductive anode films were fabricated on glass tube substrates by sol-gel process.
首先，本文重点研究了ITO薄膜的溶胶—凝胶制备工艺。
Firstly, ITO conductive anode films were fabricated on glass tube substrates by sol-gel process.
首先，本文重点研究了ITO薄膜的溶胶—凝胶制备工艺。
应用推荐