Using fluid dynamics analysis software CFD made a numerical simulation to the BOP control system pressure relief valve under the valve different working conditions;
使用流体力学分析软件对减压溢流阀在阀口不同开度条件下进行了阀内流场的数值模拟和仿真；
In this paper a reliable commercial CFD software FLUENT is introduced to simulate the viscous fluid field around the trimaran sailing in shallow waters.
本论文就是利用较成熟的商业软件FLUENT对处浅水域情况下的三体船周围的粘性流场进行数值模拟。
This article does the research on the oil-air separator used in the submarine using FLUENT, the business software of CFD.
本文利用计算流体力学CFD商业软件FLUENT对潜艇上使用的油气分离器内部流场进行了数值模拟。
The method for prediction the meter factor of the turbine flow meter by the computational fluid dynamics (CFD) software package (FLUENT) is put forward.
提出了利用计算流体力学(CFD)软件(FLUENT)进行涡轮流量传感器仪表系数预测的方法。
This paper introduces the general structure and characteristic of CFD commercial software.
介绍了通用CFD商业软件的一般结构及其特点。
In order to predict the hydrodynamic performance of propeller with boss cap fins, CFD software was used to calculate the its open water performance.
为了预报毂帽鳍的水动力性能，采用计算流体力学软件对粘性流场中毂帽鳍的敞水性能进行计算研究。
In this paper, ion-exchange membrane used for EDI is studied, and flow field distribution modeling of dilute chamber with computational fluid dynamics (CFD) software is studied for the first time.
本文主要对EDI设备中的离子交换膜进行研究，并首次采用计算流体力学(CFD)软件对淡水室隔板的流场分布进行模拟。
Based on Huygens principle of wave propagation, a numerical simulation method on CFD software unstructured mesh was founded so as to calculate burning surface regression directly.
根据惠更斯波传播原理，构建了一种在通用CFD软件的非结构网格系统上直接计算燃面推进的数值方法。
In steady and transient state, air temperature field and flow field inside the thermoelectric refrigerator, loaded and no loaded, are calculated by using a CFD software PHEONICS.
采用PHEONICS数值仿真软件，对热电冰箱的无负载瞬态工作、有负载稳态和瞬态工作时箱内温度场和流场进行了数值模拟。
Based on the structure traits of this kind of building, the paper simulates four different air conditioning schemes by CFD software.
本文根据此类建筑的结构特点，借助CFD软件对四种空调方案进行了模拟。
Numerical simulation analysis is made of the paste piping transportation using FLOTRAN CFD calculation hydrodynamic analysis module in ANSYS software based on the paste filling mechanical parameters.
以膏体充填力学参数为基础，运用ANSYS软件中的FLOTRANCFD计算流体动力学分析模块对膏体管道输送进行了数值模拟分析。
Based on a multifunctional CFD software, the three-dimensional velocity field within the impeller of NASA low-speed centrifugal compressor is computed in detail in this paper.
本文采用一多功能流体动力学计算软件，详细计算分析了NASA低速离心压气机叶轮内部的三维速度场。
Via analysis and calculation by CFD software and actual test, it is proved that great improvement has been achieved.
并通过CFD软件分析计算及实车试验，结果证明通风降温取得了较好的效果。
The internal flow field of multi-turbine is studied by CFD software, and the simulated pressure drops and torques are discussed in this paper.
应用CFD软件对涡轮钻具组的内流场进行了分析研究，重点讨论了模拟压降和扭矩。
Numerical analysis of the kerosene spray supersonic combustion was carried out in the dual-mode supersonic combustor with the CFD software.
利用计算流体力学软件对煤油在所设计的双模态超声速燃烧室内的超声速喷雾燃烧进行了数值模拟。
The main contents include: 1 the flow field and sound field were simulated with CFD software for the indoor unit of the air conditioner.
主要研究内容包括：1利用CFD软件对挂壁式空调器室内机进行流场和声场模拟。
By using CFD software FLUENT, numerical simulation for the three-dimensional flow of air between honeycombed plate heat transfer components is carried out.
应用CFD软件FLUENT对蜂窝板传热元件板间空气的三维流动进行了数值模拟。
In this paper, the business CFD software PHOENICS is adopted to simulate the velocity and streamline distribution of a rectangular sedimentation tank.
本文利用CFD商用软件PHOENICS，模拟平流式二沉池内的流线和速度分布。
The three-dimensional simulation model of the spiral inlet duct of a diesel engine is created with the FIRE software, and CFD simulation of inlet flow is carried out.
利用FIRE软件建立了某柴油机螺旋进气道的三维仿真模型，对进气流动进行了CFD模拟计算。
Also FLUENT, which is the large scale CFD software, has been applied to imitate the foaming process of aluminum melt.
利用大型计算流体软件——FLUENT对熔体直通气体发泡法过程进行模拟。
Thirdly, CFD software FLUENT was applied to simulate the wiping process by rotor on the evaporating wall in two-dimension plane.
本文使用计算流体力学软件FLUENT对二维平面上转子对壁面液膜的刮擦过程进行模拟。
On the wind engineering problems, based on general CFD software, the establishment of appropriate numerical models can meet the requirements of the engineering practice.
结构抗风实际工程问题中，基于通用CFD软件，建立适当的数值模型可以获得满足工程实践要求的计算结果。
By computing through the comprehensive CFD software, FLUENT 6.1, the flow field of mixture flow and the sludge distribution is simulated and analyzed.
采用大型计算流体软件FLUENT 6.1进行计算，模拟并分析了氧化沟沟内的混合液流场及污泥分布。
During the design process, CFD wind field simulation analysis was employed alongside with professional/spectacular software.
在设计过程中，CFD风场模拟分析一直沿用在专业/超级软件中。
In this thesis, simulation on intake and injection process of the TY3100 non-road diesel engine was carried out by using CFD software STAR-CD.
本文利用STAR - CD软件对非道路用柴油机TY 3100的进气压缩及喷雾过程进行了三维数值模拟研究。
With the aid of CFD software NUMEC a, computational simulating is performed on an Axial-flow compressor for the study of casing treatment mechanism.
本文以某亚音轴流压气机为原型，主要借助数值模拟手段展开了对机匣处理机理的研究。
Three dimensional field of a variable geometry linear turbine cascade is simulated by CFD software NUMECA.
使用CFD软件NUMECA对变几何平面叶栅三维流场进行了数值模拟。
The numerical simulation on fluid flow in cooling water jacket of 498 diesel engine is performed using computational fluid dynamics (CFD) software FLUENT.
应用CFD模拟分析软件FLUENT对498发动机冷却水套内的流场进行模拟计算，研究分析了水泵内流场对发动机内冷却水流动的影响。
Use CFD software, the area of flow channel for forward skewed and backward skewed impeller was analyzed, and the differences in the performance of pressure between them was got.
利用CFD软件分别对前向和后向叶轮旋涡风机的单个叶道进行流场分析，得到前向和后向叶轮单个叶道的压力性能差异。
Use CFD software, the area of flow channel for forward skewed and backward skewed impeller was analyzed, and the differences in the performance of pressure between them was got.
利用CFD软件分别对前向和后向叶轮旋涡风机的单个叶道进行流场分析，得到前向和后向叶轮单个叶道的压力性能差异。
应用推荐