The design of the single chip system, sample box thermostat circuit, sample position detecting circuit and step motor control circuit are discussed.
着重讨论了单片机系统、样品箱恒温电路、样品位置检测电路和步进电机控制电路的设计。
It described the control circuits of single chip AT89C2051 used in step motor.
介绍了一种采用AT 89 C 2051单片机控制步进电机的实用电路。
By adopting PID synchronous control algorithm, single chip microcomputer and photoelectric digital measuring technology, multi motor synchronous drive microcomputer control device ws developed.
采用PID同步控制算法、单片机控制技术和光电数字测量技术，研制了多电机同步传动微机控制装置。
The whole of this robot included dynamic system, mechanical system and control system. This control system mainly included PIC single chip, motor drive circuit, and sensor module.
该机器人由动力系统、机械系统和控制系统组成，其控制系统主要由PIC单片机、电动机驱动电路和传感器模块三部分组成。
This robot consists of dynamic system, mechanical system and control system. The control system mainly includes PIC single chip, motor drive circuit and sensor module.
该机器人由动力系统、机械系统和控制系统组成，其控制系统主要由PIC单片机、电机驱动电路和传感器模块三部分组成。
The design using ATMEL89C51 single chip to control the step-motor with its controller, driving circuit and LED display circuit to realize step motor open-loop control were introduced.
通过ATMEL89C 51单片机对步进电机进行控制，主要介绍了步进电机控制器、驱动电路和LED显示电路的设计，实现了步进电机的开环控制。
The paper provides a scheme to control AC servo-motor using single chip-computer AT89C51, including hardware design and software design.
介绍了一种由at89c 51单片机控制交流伺服电机的系统方案，包括系统硬件设计和软件设计。
From the application control of triple-phase asynchronous motor, the principle of motor soft starter based on single chip was introduced, and its design method was also given.
从三相异步电动机的应用控制出发，介绍了基于单片机控制的电机软启动器原理，给出了基于单片机控制的电机软启动器设计方法。
The article reports a kind of automatic device using 8031 single chip microcomputer for the control of a stepping motor and small electromagnetic valves.
本文介绍利用8031单片机控制步进电机及微型电磁阀而实现的一套自动变换药液装置。
The NC remaking scheme of tool grinder is a closed-loop control system, which USES single-chip microcomputer as a control system and step motor as the executive equipment.
以工具磨床刃磨铣刀螺旋刃的数控改造为例，阐述了基于单片机控制的数控改造方法。
The protection, measurement and control unit of low voltage electric motor based on single-chip microcomputer 80c196 was introduced briefly.
主要介绍基于80c196单片机控制的低压电动机保护测控单元。
In this paper, a slip-frequency vector control system using a single-chip micro - computer 8031 of MCS-51 family for variable frequency speed control of induction motor is introduced.
本文介绍了一种采用MCS—51系列单片机8031对异步机实行滑差频率矢量控制的调速系统。
Designed stepper motor driver application circuit and Single Chip Microcomputer control circuit, and compiled the SCM procedures, finished to communicate with the upper computer.
设计了步进电机驱动应用电路和单片机控制电路，并编写单片机程序，完成与上位机通信。
The control system of WX-042 grinder consisted of 8031 single chip computer, stepping motor servo device and grating displacement tester, can automatically compensate the wear of the wheel.
本文介绍了WX—042磨床的单片机控制系统，它由8031单片机、步进电机伺服装置及光栅位移检测装置等组成。具有砂轮磨损自动补偿功能。
Using a single chip microcomputer to control a stepping motor as an example, the theoretical and experimental research about lots of motion laws of the driven CAM is implemented.
并以单片机控制步进电机为实例，进行了实现凸轮机构从动件多种运动规律的理论和实验研究。
Based on AT89C51 single chip processor, divided driving control technology is applied to the control of DC brushless motor in real time tracking system, which increases the precision of control.
利用AT 89C5 1单片机实现将细分驱动控制技术应用于实时跟踪系统中的直流无刷电机控制，提高了控制精度，对控制系统的硬件和软件进行了详细介绍。
AT89C2051 single chip microcomputer is used as its control, step motor is used as electro mechanical transformer and eccentric wheel mechanism is used as mechanical transformer in this valve.
该阀采用AT 89C2 0 5 1单片微机作控制器，步进电动机作电-机械转换器旋转，偏心轮机构作机械转换器。
The control system consists of AT89S52 single chip computer system, autonomous tracing circuit, balance detection circuit, driving circuit of stepping motor and LED display circuit.
该系统包括单片机系统电路、寻迹检测电路、平衡检测电路、步进电机驱动电路、数码显示电路等。
A novel high performance AC servo system with permanent magnet synchronous motor (PMSM) using vector control is presented. A 8096 single chip microcomputer is used as the controller and operator.
本文提出了一种新颖的以脉冲序列为位置给定、采用矢量控制方式的永磁同步电动机交流位置伺服系统。
The design adopts serial control mode, in this case there are only two controlling lines between the single chip microcomputer system and the driver of the step motor.
单片机对步进电机的控制有串行控制和并行控制两种方式。本设计采用的是串行控制方式，此方式下单片机控制系统与步进电机驱动器之间只有两条控制线。
The design adopts serial control mode, in this case there are only two controlling lines between the single chip microcomputer system and the driver of the step motor.
单片机对步进电机的控制有串行控制和并行控制两种方式。本设计采用的是串行控制方式，此方式下单片机控制系统与步进电机驱动器之间只有两条控制线。
应用推荐