As well as setting the shape you can set the tolerance for the picking operation.
除了设定形状之外你还可以设定拣选操作的公差。
Again, local policy must be set based upon corporate tolerance for wider synchronization intervals.
本地的政策必须根据公司容对于更广同步化间隔的容忍度来设置。
"11 and 12", set in Mali, is the story of two holy men who call for tolerance when a doctrinal dispute flares into violence and is exploited by French colonists.
以马里为背景的《11与12》，讲述了两位圣徒学术在争论愈演愈烈时主张互相宽容，受到法国殖民者剥削的故事。
FDA has not set a "tolerance level" for many of the drugs, pesticides and heavy metals found in beef, including copper and arsenic, which can promote growth and inhibit certain parasites.
食品药监局并未为许多自牛肉中发现的药物、农药和重金属元素设立“容忍标准”——包括铜元素和砷元素在内，这些添加物可以促进牛只生长及杀灭某种寄生虫。
They are thinner than average, relentlessly upbeat and seem to have a high tolerance for physical pain and psychological set-backs.
他们身材更苗条，始终保持乐观，而且似乎对疼痛感和心理挫折的忍耐力更强。
Make sure that the Tolerance value is set to about 20 and that the Anti-alias and Contiguous options are checked as demonstrated below.
确保容差设在20左右，消除锯齿和连续是勾选上的，如下图。
The error indication and machine stop occur only if such tolerance is exceeded for the time period set in the next parameter(TIME TNESION).
错误指示和机器停止发生只有当是否如此的容许度在下个叁数中被为时间周期组超过。
By an example, it is verified that the extension of rough set based on modified tolerance relation is more convenient and effective than the previous extensions in practice.
通过实例，说明了基于修正容差关系的扩充粗糙集模型对处理不完备信息系统更加简便有效。
There is no reason to love and do not set the premise of tolerance, is love.
没有理由的心疼和不设前提的宽容，就是爱。
There is no reason to love dearly and do not set the premise of tolerance, is love.
没有理由的心疼和不设前提的宽容，就是爱。
Tolerance relation is an effective tool in patulous rough set theory to deal with incomplete information systems.
在扩充粗糙集理论中，容差关系是一种处理不完备信息系统的工具。
The local dimension chain and overall dimension chain are set up automatically. The whole frame of tolerance design and relevant feeding back is established.
分析在设计过程中自动生成局部尺寸链和全局尺寸链的方法，建立公差设计和反馈的整体框架。
To ensure the feasibility of conceptual-structure design and its cost saving, the tolerance design was set in the conceptual design stage and its key technologies were studied.
为保证概念结构设计的可行性与经济性，提出了将公差设计研究提前到概念设计阶段的思想，并研究了其中的关键技术。
In this paper, a new extension of rough set based on modified tolerance relation is presented.
提出了一种基于修正容差关系的扩充粗糙集模型。
To obtain knowledge and data from incomplete decision table(IDT), the paper presents a new doubly variable precision limited tolerance rough set theory model(VPLTRST).
为了能够从不完备决策表（IDT）中进行知识发现和数据挖掘，提出一种新的具有对称性的双重可变精度限制容差关系粗集模型（VPLTRST）。
Based on the profound research of rough set theory, the decision table is default filled by using tolerance relation, which proves efficient.
文章在对粗糙集理论研究的基础上，运用容差关系对含有决策的数据表进行了遗漏补缺，实例表明此方法是行之有效的。
The presentation of rough sets based on tolerance relations expands the application scope of rough set theory.
基于容差关系粗糙集的提出扩大了粗集的应用范围。
Second, the media staff should set multi-view points, tolerance concept and right gender view.
第二，媒体工作者应树立多元视角、宽容理念和正确的性别观念。
Selected empty parlor height and large area ground impact window set off one another, the parlor therefore is equipped with host like tolerance and natural and graceful disposition.
被挑空的客厅高度与大面积落地飘窗相互映衬，客厅因此具备主人般的气度与雍容。
This paper discussed the designing method of damage tolerance, gave calculation formulas of reliability in crackle, and finally, for an example, optimal design of the pressure vessel has been set up.
论述了损伤容限设计的方法，给出了压力容器含裂纹的可靠度计算公式，并举例确定了某压力容器的最佳设计。
By an example, it is verified that the extension of rough set based on modified tolerance relation is more convenient and effective than the previous ex...
通过实例，说明了基于修正容差关系的扩充粗糙集模型对处理不完备信息系统更加简便有效。
As you can see from the above results, none of the power supplies tested broke the 5% tolerance levels that the ATX specs set out.
正如你可以从以上结果看，电力供应没有测试，打破了5%的耐受程度，该列的AT X规格。
It has a simple programmable control unit that can set target weight and tolerance to feed an increment of material.
它有一个简单的可编程控制装置，可以设定目标重量和控制原料的分配。
The lot sizing problem with fuzzy customer demands and multi technological constraints was studied by taking advantage of the fuzzy set theory and the idea of tolerance.
基于模糊集理论与容差法思想 ，研究了具有模糊客户需求与多工艺约束的批量生产计划问题 ，采用遗传算法寻找优化的计划方案 。
According to the characteristic of circuits which exist tolerance, this paper improves the fault dictionary approach and presents a new method-overlap set approach.
本文根据存在容差时电路的特点，对现有的故障字典法作了改进。
The fuzziness in the limiting dimension of the parts is discussed. The fuzzy mathematical expression of the margin tolerance of the parts is proposed based on fuzzy set theory.
讨论了零件极限尺寸的模糊性，基于模糊集合提出了零件尺寸公差带的模糊数学表征。
Objective To evaluate orthostatic tolerance level and set up normal reference value of orthostatic tolerance test(OTT) for Chinese fighter pilots.
目的为了评价中国歼击机飞行员立位耐力水平及建立中国歼击机飞行员立位耐力试验正常值。
An adjusting ring is set to compensate the manufacturing tolerance of a crankshaft.
设置了调整环，以补偿曲轴制造误差。
Then the process model of tolerance synchronous synthesis is built. The local dimension chain and overall dimension chain are set up automatically.
分析在设计过程中自动生成局部尺寸链和全局尺寸链的方法，建立公差设计和反馈的整体框架。
Evaluation of rice submergence tolerance at tillering stage was set up in the paper, submergence tolerance of 19 varieties at tillering stage was evaluated.
本论文首先以耐淹涝能力不同的19份品种为材料，优化了水稻分蘖期耐淹能力的评价指标体系，并对19份材料进行了分蘖期耐淹能力评价。
应用推荐