Additional serial ports available.
提供额外的串行端口。
Arduino serial ports gives bad data?
Arduino的串行端口给坏数据？
Can adjust the instrument through serial ports.
可通过串口对仪表进行标定的功能。
Demonstrates how to show available serial ports.
演示如何显示可用串行端口。
There are no Serial Ports which can be setup on this system.
该网络的学习算法是串行的，可以进行动态建模。
Common examples are switches and LEDs, serial ports, and network controllers.
一般的实例是开关、LED、串口和网络控制器。
A serial line (null-modem cable) connects the machines through their serial ports.
一条串行线(空调制解调器电缆)将通过机器的串口连接它们。
Typically, the modem is connected to one of the serial ports on the computer.
一般而言，数据机会连接至电脑上的其中一个序列埠。
Most lower end chips lack dedicated serial ports and require pin-programming.
大部分低端芯片缺少专门的串行接口，并需要管脚编程。
A null modem cable is a serial cable that allows data to be sent between two serial ports.
零调制解调器电缆是一种允许在两个串行端口之间发送数据的串行电缆。
rc.serial Configures your serial ports by running the appropriate setserial commands.
通过运行一些命令来配置你的一系列端口
The system adopts single main-station to control the serial ports under free port mode.
系统采用单主站方式，在自由口模式下控制串口。
Serial_cs can also emulate serial ports over Global Positioning System (GPS) PCMCIA and CF CARDS.
serial_cs也可以通过全球定位系统(GPS)PCMCIA和cf卡模拟串行端口。
The conventional serial ports are classified as synchronous serial port and Asynchronous serial port.
业界常用串口分为同步串口和异步串口。
The HMW Series 1500 Thin Clients come with built-in Ethernet, serial ports and integrated touchscreen.
HMW 1500系列瘦客户机内置以太网，串行端口，集成触摸屏来。
Peripherals connected through the SRU include, but are not limited to, serial ports and SPI ports block.
通过SRU连接的外设包括但不限于：串行接口、SPI端口模块。
This paper introduce a way based on embedded system that can realize the serial ports conversion gateway.
本文介绍了一种采用嵌入式系统来实现多串口转换网关的方法。
The console and AUX ports are serial ports that are used primarily for the initial configuration of a router.
主控台和AUX埠是序列埠，它们主要使用在路由器的初始组态设定。
This serial ports driver which has been applied and tested for a long time runs steadily in the whole system.
该串口驱动经过长时间的应用和测试，在整个系统中运行稳定。
Standard features such as 2 serial ports, one parallel port, a diskette drive and a CD ROM drive are provided.
标准功能，如第2，串行接口，一个并行接口，软盘驱动器和CDROM驱动器提供。
The communication between host computer and slave computers is accomplished through their serial ports, RS232C.
上位机、下位机之间通过RS232C串行通讯接口总线交换数据。
The testing data is sent to FPGA board through serial ports. This processor reads the data and sends to PC host.
为了准确测试本处理器的运行情况，本文应用串口传递测试数据入FPGA开发板，测试模块读入测试数据，发送入PC机的主机端。
Use a null modem cable to connect the two nodes through their serial ports. Now test the serial connection, as follows.
通过两个节点的串口，使用一根直连线缆将它们连接起来。
It offers four logical inputs and four relays for interfacing to contact closures and RS-232 and RS-485 serial ports.
有四个逻辑输入口和四个继电器，使界面连接闭包和RS- 232、RS - 485串行端口。
One of the posts that keeps reappearing in the programming newsgroups is how to enumerate all the serial ports installed.
其中一个端口，让出现在新闻的节目是如何列举所有的串行端口安装。
A null modem cable connected between the serial ports of the two systems is used to transmit heartbeats between the two nodes.
两个系统的串口之间的直连线缆用来在两个节点间传输heartbeat。
In this paper, four serial ports were expanded by TL16C554 and remote communication between repeaters and four slaves was realized.
通过异步扩展芯片TL16C554实现了扩展4路串口，并完成4路信号的实时接收和发送，实现了集中器与4个子机的远距离通信；
Serial ports with simple protocol are used to communicate with wireless communication part, and the protocol is implemented by FPGA.
串口通信的结构和协议简单，直接由FPGA实现控制，用于和无线通信模块通信；
Serial ports with simple protocol are used to communicate with wireless communication part, and the protocol is implemented by FPGA.
串口通信的结构和协议简单，直接由FPGA实现控制，用于和无线通信模块通信；
应用推荐