The symmetry rolling technology for taper ring is suggested.
成功开发了圆锥套圈对称辗扩的新工艺。
The principle of varying contact rolling technology is introduced.
阐述了变接触轧制技术的原理。
The roller design is the key point for the cold rolling technology.
渐开线花键滚轧轮的设计是渐开线花键冷滚轧的关键技术。
It is an important technique innovation for hot-rolling technology.
对热轧工艺是一项重大的技术革新。
The high quality heavy rail must be produced by high precision rolling technology.
在钢材产量大于市场需求的条件下 ，高精度轧制显得更加重要。
The feasibility of this controlled rolling technology was studied by FEM simulation.
利用有限元技术，模拟分析了工艺的可行性。
The paper mainly studies following three problems of shipping anti-rolling technology.
本文主要就船舶减摇技术的以下三个方面进行了研究。
The low temperature rolling technology can save energy. And it has function to the get fine crystal.
低温轧制能够实现节能降耗，同时对细化晶粒也有一定作用。
This article presents research on rolling technology of micro-alloyed high carbon hard wire at JISCO.
介绍了酒钢微合金高碳钢硬线轧制工艺研究。
The results showed that the developed hot rolling technology features the high stability and reliability.
实验结果表明，开发的热轧轧制生产工艺具有较高的稳定性和可靠性。
Some Suggestions for in-depth research and further application of ring rolling technology are put forward.
提出了深入研究和推广应用辗扩成形技术的建议。
Controled rolling USES alloying, controled heating technology and rolling technology and controled cooling.
控制轧制可采用合金化、控制加热工艺、轧制工艺和控制冷却来实现。
New rotary rolling technology, equipment selection and die design for Model EQ140 auto semi-axle has been introduced.
介绍了EQ 140汽车半轴摆辗新工艺、设备选择及模具设计要点。
The paper introduces the general situation of modern rolling technology applied by Benxi steel posco rolling company.
介绍了本钢浦项合营公司采用的先进轧制技术的概况。
Low temperature rolling technology was applied for continuous rod production line in order to reduce energy consuming.
棒材连轧生产线可采用低温轧制工艺实现节能降耗。
A key link in rolling technology is rolling specification, which has great influence on process and quality of products.
轧制规程是轧钢工艺的基础环节，它直接影响轧钢过程和产品质量。
The type, application, technological parameters and die structure of the cross-wedge-rolling technology were introduced.
介绍了楔横轧工艺的类型、应用、工艺参数及模具结构。
Present design criterion for the roller. This will be have guiding significance to the design of ring rolling technology.
在综合考虑各种因素的基础上提出了轧环机轧辊设计准则，对环件轧制工艺设计有指导意义。
The rolling technology and force-power parameters of hot rolling of pipeline steel grades X60H, X65H are discussed in the paper.
对热轧管线用钢板X60H、X65H试轧过程中的轧制工艺和力能参数进行了较全面的分析研究。
Plan view control, dynamic regulation automatic setting system and controlled rolling technology are also included in this system.
系统还包括平面形状控制、动态规程自动设定和控制轧制技术，构成一个较完善的控制系统。
The continuous casting rolling technology for nonferrous metals is a typical high efficiency, energy saving and short process method.
有色金属的连铸连轧、连续铸轧是典型的高效、节能、短流程加工技术。
This paper describes the effect of hot-rolling technology on the composition, structure and properties of explosion-formed Ti-steel clad plate.
本文叙述热轧工艺对钛-钢爆炸复合板的成分、组织和性能的影响。
In this paper, the rolling technology and deformation characteristics of strip with surface pat-tern of round beans are introduced and discussed.
本文介绍了圆豆形花纹板的轧制工艺，分析了花纹板的变形特点。
This article's based on 1370mm strip rolling technology reform of a certain precision sheet metal company. AGC system was studied in this article.
本文以某公司1370冷带轧机技术改造项目为背景，对该轧机液压厚度自动控制系统进行了深入研究。
The production of stainless steel flat products can be realized by adopting medium-sized slab continuous casting and continuous rolling technology.
利用中厚板坯连铸连轧生产不锈钢是可行的。
Thin slab casting and rolling technology has been developing toward two directions: ultra-thin strip production and multiple steel grades production.
前言：薄板坯连铸连轧工艺有两个发展趋向：超薄带钢生产线和多品种生产线。
This paper introduces characteristic of cross rolling technology and its application in forging products of left continuous motion stem on automobile.
介绍了楔横轧工艺特点及其在汽车左连动杆锻件制坯中的应用，说明了模具设计工艺参数的选取和现场调试方法。
In the paper some technological and equipment problems about the application of high speed rolling technology in double duo wire rod mill are discussed.
讨论了采用高速轧制技术改造复二重线材轧机的设备和工艺问题。
The aluminium base bearing alloy with rare earths is studied in this paper, which recommends making alloy, coating aluminium and rolling technology of bimetal.
本文介绍了稀土铝基轴承合金的研制，合金包铝及复合轧制工艺。
At present, the ring rolling technology roll one ring in one process, and the technology can't deal with stress focus on the sharp taper Angle of mandrel roller.
目前锥形套圈辗扩技术只能一次成形一件，而且由于锥形套圈锥角使得芯辊应力集中严重。
应用推荐