"Rolling, rolling, rolling lunch box!" The old man became more excited and danced even harder.
“滚吧，滚吧，午餐盒也滚起来！”老人越来越兴奋，他跳的越发起劲。
Mechanism of metal powder rolling where powder weight keeps constant before and after powder rolling, is different from that of conventional dense metal rolling.
金属粉末轧制机理与传统的致密金属轧制机理不同，在这里适用的是粉末轧制前后粉末重量相等原理。
Based on physical simulation of edge rolling process in Trimming-Free plate rolling method, the effection of V rolling and chamfer rolling on the plate profile is analyzed.
基于中厚板无切边轧制法中立轧轧边变形的物理模拟，分析了平辊立轧与倒棱轧制对中厚板断面形状的影响。
In the process of rolling, the movement of rolling sets decide the rolling pressure, the deformation of the spindly shaft and consequently the rolling quality.
在滚压加工工艺中，滚压套的压下量大小决定了滚压力的大小并决定了细长轴表面发生弹塑性变形的状况，从而决定了细长轴的加工质量。
By warm rolling after hot rolling or cold rolling after annealing in process and stabilizing annealing in some temperature condition, the c.
采用热轧后温轧或中间退火后冷轧，再在一定温度下进行稳定化退火的工艺，可以获得综合性能良好的铝-镁-钪合金冷轧板材。
The rolling forces for different rolling passes and the influence of the rolling pass on conductor shape and conductor remainder stress have been obtained.
得到了导体在不同轧制道次中所需的轧制力以及轧制道次对导体形状和残余应力的影响。
Rolling strategy is a foundation of the parameters setting in optimization control of rolling process. An excellent rolling strategy is Key to evaluating a rolling process comprehensively.
轧制策略是轧机进行过程优化控制参数设定的基础，轧制策略的优劣是综合评价轧机效能与轧制质量的关键。
Based on physical simulation of edge rolling process in Trimming-Free plate rolling method, the affection of V rolling and chamfer rolling on the plate profile is analyzed.
基于中厚板无切边轧制法中立轧轧边变形的物理模拟，分析了平辊立轧与倒棱轧制对中厚板断面形状的影响。
At the same time, to increase the rolling reduction, reduce rolling passes and improve the productivity of rolling mill.
同时可增加压下率，减少轧制道次，提高了轧机的生产率。
The effect of rolling process on the microstructure and mechanical properties of deep-drawing molybdenum strip was investigated in this paper through changing rolling temperature and rolling process.
通过轧制温度、轧制方式实验，以及织构和力学性能分析，研究了轧制工艺对液晶显示背光源用的深冲钼带的组织和性能的影响。
While studying the rolling influence of the course to rolling compounding of craft parameter, have probed into the rolling temperature and influence of deformation amount especially.
在研究轧制工艺参数对轧制复合过程的影响时，重点探讨了轧制温度以及变形量的影响。
The model is very useful in practical ring rolling production analysis and can find application in other rolling processes like strip and plate rolling etc.
该模型可用于实际生产中的工艺分析，不仅适用于环件轧制，亦适用于板带连轧等其它轧制过程。
On the basis of the limited conditions, entry thickness, exit thickness, rolling speed, tension, rolling force and rolling torque, etc. are calculated.
根据极限条件，计算出入口厚度、出口厚度、轧制速度、张力、轧制力、轧制力矩等。
The effect of rolling oil foaming on product quality in the rolling process of cold rolling aluminum sheet strip was discussed.
通过分析冷轧铝板带材轧制过程中轧制油起泡对产品质量的影响，阐述了轧制油起泡的原因，并提出了针对轧制油起泡的对策。
Based on the rolling force model and field data of Baoshan steel plant, the rolling force during continuous hot strip rolling process is simulated by using the DEFORM-2D software.
应用DEFORM - 2d软件对带钢热连轧过程的轧制力进行了有限元模拟，并与宝钢轧制力模型进行了比较。
Results showed that the properties of cold rolling sheet used for native passenger car, especially IF cold rolling sheet, can compare with external cold rolling sheet.
结果表明，国产轿车用冷轧钢板，特别是IF冷轧钢板，其性能可与国外冷轧钢板相比。
Through the rolling experiments, the influencing regularity of the rolling starting temperature and the rolling reduction on the microstructure and the mechanical properties has been obtained.
再轧制实验，获得了不同开轧温度和轧制压下量对组织性能影响数据。
Rolling plan problem is analyzed and a rolling plan VRP model with uncertain rolling plan Numbers is suggested according to hot rolling production practice.
分析了轧制批量计划编制问题，建立了不确定轧制计划数的轧制计划VRP模型。
The end trumpet and end triangle can be eliminated if a rolling process with three angles rotating is used for thick wall pipe rolling and other processes for thin wall pipe rolling.
采用三转角轧制法轧制厚壁管和相反的操作法轧制薄壁管可消除喇叭口与尾三角。
On the basis of analyzing factors to influence the rolling model of tandem cold strip mill and combining rolling theory with experiment, a new rolling force model was developed.
在分析冷连轧机轧制力模型各种影响因素的基础上，通过理论推导结合现场试验建立了新的轧制力模型。
The production of hot strip rolling is very important in steel rolling. Then the hot rolling control theory is the basic theory in hot rolling.
热轧带钢的生产在轧钢生产中占据重要的地位，而热连轧控制理论是热轧生产过程中的基础理论。
In order to check skew rolling design theory, and got parameters of al ball rolling, experiments of two grooves rolling al ball were made.
为了对设计理论进行检验，并获取铝球轧制的力能参数，本文作者做了铝球双头轧制实验。
Considering the difference of the rolling missile and the non-rolling missile, the mechanism of rolling missile control force and the control theory of rolling missile was analyzed rigorously.
考虑到滚转导弹与非滚转导弹的不同，本文仔细分析了滚转导弹控制力的产生机理和滚转导弹的控制原理。
According to this formula of rolling force, through the rolling force and roll flattening radius conditions for decoupling calculation, the explicit calculation expression of rolling force is derived.
针对该轧制力公式，通过对轧制力和轧辊压扁半径条件进行解耦计算，推导出轧制力的显示计算式。
The paper gives a rolling force formula of rolling aluminum foil, which indicates actual rolling process and physical deformation.
从铝箔轧制过程的实际出发，提出一个能够反映铝箔轧制过程物理变化规律的计算铝箔轧制力公式。
Rolling lines are designed by rolling, moving TOX rivet of single cantilever and automatic cutting, which may be referred to similar rolling process.
设计由滚压、单体悬臂移动式TOX铆接和自动断料等工艺流程组成的滚压成形线可作为类似滚压工艺参考。
The rolling mechanism was studied in this paper. The rolling process and the design of pass of rolling mill were researched, meanwhile, the rolling pressure of Y-type rolling mill was also calculated.
本文从研究轧制原理入手，对轧制工艺及孔型设计进行了深入研究，给出了Y型轧机轧制压力计算。
The rolling mechanism was studied in this paper. The rolling process and the design of pass of rolling mill were researched, meanwhile, the rolling pressure of Y-type rolling mill was also calculated.
本文从研究轧制原理入手，对轧制工艺及孔型设计进行了深入研究，给出了Y型轧机轧制压力计算。
应用推荐