Boeing is considering raising the 737 production rate from 37 aircraft a month to 40.
波音正考虑将737的生产率从每月37架提升至40架。
The gravimetric hydrogen production rate exceeds that of other solar-driven thermochemical processes by more than an order of magnitude.
而分解出氢的效率以重量计算可比其它太阳能热制程的效率高出一个数量级。
Thus production is "pulled" by the demand down the line rather than, as in previous assembly-line systems, being "pushed" by the production rate higher up the line.
因此,一改往日装配线体系中生产率推动生产的模式,实行由需求拉动生产的模式。
Thus production is “pulled” by the demand down the line rather than, as in previous assembly-line systems, being “pushed” by the production rate higher up the line.
因此,一改往日装配线体系中生产率推动生产的模式,实行由需求拉动生产的模式。
The proposed method can improve pulp quality at high production rate of the conical disc refiner.
该方法能在保证锥形磨浆机较高生产效率的同时改善纸浆质量;
What is the total biogas production rate per hour?
什么是每小时总生物气产量?
Unit production cost is a function of production rate.
单位生产成本是生产率的函数。
And it will raise the product quality and production rate prominently.
对提高产品质量和劳动生产率有重要意义。
Therefore, a reasonable increase in the gas production rate is feasible.
因此,适当提高采气速度是可行的。
Production Rates - What is the actual production rate and the supply target production rate?
产率—实际产率和计划目标产率比较。
Guangzhou Toyota has improved its average production rate from 80 seconds a car to 61 seconds a car.
广州丰田造车速度全面提升,生产节拍逐步从现有的80秒生产出一辆车提升到61秒生产出一辆车。
The effects of sample weight and light intensity on the measurement of production rate were discussed.
讨论了测定时的样品重量和光照强度对生产率的影响。
Production gain is calculated using an average production rate 30 days before and after the refracturing.
产量按重复压裂30天前和重复压裂30天后的平均产量进行计算。
This technique has such advantages as shortening time limit, enhancing production rate and decreasing cost.
采用此法,可缩短工期、提高工效、降低成本。
Result OSR economic limits decrease with the increase of oil sales price, recovery rate and production rate.
结果随着原油售价、原油采收率、采油速度的提高,经济极限油汽比降低。
The result shows that it can lower manufacturing cost, decrease labor intensity and increase production rate.
结果表明,优化后的工艺能降低制造成本,减小劳动强度,提高生产率。
If there is a shale sandwich near wellbore in horizontal well logging, it is harmful to promote production rate.
水平井射孔井段的井眼附近若有泥质夹层,无疑对水平井提高采收率是很不利的。
We also analyse optimal production rate, optimal batch size and raw material ordering policy under volume flexibility.
本文还对产量柔性下最优生产率及最优生产批量和原材料订购决策进行了分析。
NC machine tools work so fast that their production rate is equal to the rate of five manually operated machine tools.
数控机床工作迅速,其生产率是手动机床的五倍。
The analysis of example proves that the low permeability of interior zone will sharply reduce the maximum production rate.
实例分析证明,内区的低渗透率会急剧降低无阻流量。
This method has a simple technological process, short reaction time, high production rate and high purity for the product.
该法工艺简单,反应时间短,转化率高,产物纯度高。
And discussed the reaction temperature, the ratio of reagent, the solvent concentration, reaction time on the production rate.
并讨论了反应温度、反应物的摩尔比、溶剂的用量、反应时间对产率的影响。
The difference between static bottomhole pressure and flowing bottomhole pressure (in psi) at a constant fluid production rate.
在恒定的流体产量下,在井底静压力与井底流动压力之间的压力差值。
This method is simple and easy to operate. The labor production rate can be improved and the energy and materials can be saved.
该方法简便易行,可提高劳动生产率,并能节约能源和材料。
Optimizing continuous casting planning is one of the important ways to get high production rate and reduce the energy consuming.
编制高效的连铸生产计划在提高生产率和降低能耗方面具有十分重要的意义。
Waterdrive characteristic curve is an important method for forecasting production rate and commercial reserves of waterflood field.
水驱特征曲线法是用来预测水驱油田的产量及可采储量的重要方法。
The non equilibrium carbon potential is defined as the carbon content of steel when the net carbon production rate at surface of steel vanishes.
非平衡气氛的碳势定义为:当渗碳反应在钢表面净产生的碳为零时碳钢表面的含碳量。
Compared with turning, milling and grinding, the abrasive belt grinding has higher production rate and available factor of power of machine tool.
砂带磨削比车削、铣削和砂轮磨削的生产率高,机床功率利用率高,经济效果显著。
Some charging methods for RE chloride fusion electrolysis are improved to improve the quality and production rate and reduce the labor intensity.
本文介绍氯化稀土电解在加料方法上根据生产实际给予改进,以提高产品质量,降低劳动强度,提高收率。
Tool is one of the most important factors in the machining process. Tool wear can affect the quality, cost and the production rate of the product.
加工刀具是机械加工过程中最重要的加工要素之一,在加工过程中刀具的磨损必然会影响加工质量,加工成本及生产效率。
应用推荐