Processing is one of the most important aspects of metal matrix composites.
金属基复合材料的工艺性能是至关重要的性能之一。
The results show that the mechanical properties and color of the composites change gradually with the processing time of PVC/rice hull powder composites.
结果表明．随着加工时间的延长，PVC／稻壳粉复合材料力学性能逐渐变劣，材料的颜色也逐渐变深。
This paper discusses the factors affecting the properties of wood plastics composites including the effects of compatibility, fluidity, processing and puts forward the relevant improving methods.
介绍了影响木塑复合材料性能的几种因素，其中包括相容性、流动性、加工工艺的影响，并提出了相应的改善方法。
The results show that the characteristics of polymer gels cross linked with cations have a great bear on processing and mechanical behavior of MDF composites.
研究结果表明，阳离子交联聚合物凝胶的性能特性决定了M D F复合材料的加工与力学行为。
The processing property of the composites was maintained while the heat resistance was improved.
复合材料在保持加工性能的同时耐热性能得到提高。
The processing conditions of forming composites such as time, pressure and temperature influence the matrix's impregnating degree.
复合材料的成型条件如成型时间、成型压力、成型温度等影响基体的浸渍程度。
The physical properties of carbon fibre reinforced silver and copper composites were measured to prove the effect of sintering processing on the properties of composites.
本文通过对碳纤维增强银、铜复合材料物理性能的测定证实了复合材料的烧结工艺对其物理性能存在显著影响。
This paper studies the manufacturing processing of compressed natural gas bottle of glass fiber filament winding composites with HDPE liner.
本文对以高密度聚乙烯为内衬的玻璃纤维缠绕复合材料天然气气瓶的制造工艺进行了初步试验研究。
It turns out that proper moisture content has a positive effect on impact strength of composites while over high moisture content go against processing property.
生物质纤维中水分含量会影响复合材料的加工性能，但一定含量水分的存在，有利于提高复合材料的冲击强度。
The self-impacted drilling equipment and processing technology for the drilling of aramid fiber composites are developed, and the key technology and processing points are presented.
研制开发了一种用于芳纶纤维复合材料钻孔的自压紧钻孔装置及加工工艺，阐述了研制的关键技术及加工工艺要点。
At the same time, the processing performance of composites was improved significantly due to decrease in total amount of the flame retardants.
同时，阻燃剂总添加量的降低使复合物的加工性能得到明显改善。
The structure of preform is described, the processing parameters are predicted in theory and the designs of functional and structural composites are provided by the method of topological analysis.
本文用拓扑分析方法，对预制件结构做了说明，并对工艺参量进行了理论预测，为设计功能复合材料和特殊结构复合材料提供了新的手段。
The results show that the porosity can be significantly reduced up to 1% with correct stirring method and processing technology, and so the quality of the composites can be much improved.
结果表明，通过采取合理的制备方法和工艺参数，可以有效地使所制备材料的孔隙率降低到1%，提高材料的复合质量。
A useful study has been made on textile structure preform and RTM processing based on the manufacture of textile composites cabin.
本文通过纺织复合材料舱体的研制对纺织结构复合材料及rtm工艺作了有益的探索。
The factors which influence densification of traditional normal pressure carbonization processing used in carbon carbon composites were investigated.
研究了传统沥青浸渍、常压碳化工艺中影响沥青致密化效率的因素。
The processing parameters of PEEK composites include cooling rate, forming pressure, forming temperature and the holding time in melt.
其成型工艺参数包括冷却速度、成型压力、成型温度、保温时间。
The recent research work and development trends of wood fiber/plastics composites (WPC) were reviewed, the topics covered include processing method, micro-foaming, alloy, and special behavior of WPC.
当前的研究焦点主要包括：塑木复合材料成型方法研究、塑木复合材料微发泡研究、塑木合金材料研究和赋予塑木复合材料各种特殊性能的研究。
The effects of different processing methods and concentration on the tensile and peeling properties of thermoplastic composites were also researched.
及不同处理方法和不同处理液浓度对复合材料拉伸性能和剥离性能的影响。
Rheological behavior of composites was also enhanced by the treatments, but it also had a best dosage in processing.
对复合体系的流变性能来讲，使用改性剂即可明显得到改善，但同时改性剂的用量也存在最佳值。
Using electroplating superabrasive tools, the process of "Drilling replaced by grinding" can notably improve the processing quality and efficiency of carbon fiber reinforced composites.
利用电镀超硬磨料刀具加工复合材料的“以磨代钻”工艺的提出，极大地提高了复合材料的加工质量和加工效率。
The influence of MWNTs content and processing conditions on the conductivity and mechanical properties of composites was studied.
考查了纳米碳管含量及制备工艺对材料电性能和力学性能的影响。
The influence of MWNTs content and processing conditions on the conductivity and mechanical properties of composites was studied.
考查了纳米碳管含量及制备工艺对材料电性能和力学性能的影响。
应用推荐