The principle and calibration of the capacitance probe measurement system were investigated.
介绍了电容探针的测量原理和在稠相气固流动系统中的标定方法；
The invention realizes single crystal probe measurement or double crystal probe measurement on one ultrasonic thickness gauge, to improve test efficiency.
本发明在同一台超声测厚仪上实现单晶探头测量方式或双晶探头测量方式，提高了测试效率。
The performance of rectangular compressor cascades composed of different swept blades was studied by static pressure measurement, flow visualization and probe measurement.
通过壁面静压测量、流场显示及气动探针测量研究了不同掠型叶片组成的平面扩压叶栅特性。
The 2D unsteady flow fields around a 3-hole probe head and in its pressureholes have been numerically simulated in order to investigate the dynamic effects on the probe measurement errors.
本文采用数值方法模拟了一个三孔探头周围与测压孔内的二维可压缩非定常流场，研究了动态效应对探头绕流和测孔压力的影响，以及相应的测量误差。
Probe errors analysis and correction are the key technique in time domain near field measurement.
探头误差分析和修正是时域近场测量中的关键技术。
It is an objective for nanometer instrument researcher to improve the measurement precision of scanning probe microscope (SPM), the eye and hand of nanometer science and technology.
提高作为纳米科技的“眼”和“手”的扫描探针显微镜(SPM)的测量和定位精度，是纳米仪器界始终追求的目标。
For high frequency, or low amplitude measurement, probe ground shall be connected to appropriate points in the circuit under test.
对于高频或低幅值测量﹐探头的地应接到测试电路中的适当位置。
The principle of measurement is as follows: a probe, which features a transmitter and receiver of red and infrared light, is positioned to transilluminate a pulsatile arteriolar bed.
测量原理如下：一个传送和接收红光和红外光的探针放置并透照搏动的微动脉床。
In essence, the probe is the first link in the oscilloscope measurement chain.
从本质上看，探头是示波器测量链中的首要环节。
Probe array used for the measurement of transient RF impedance in ion cyclotron resonance heating (ICRH) experiment often gives erroneous results.
在离子回旋共振加热(ICRH)实验中用于测量瞬态射频(RF)阻抗的探针列阵常常给出错误的结果。
A typical nanostructured titania super hydrophilic film was chosen for general characterization employing a Scanning Probe Microscope (SPM) and an electrochemical measurement system.
选用典型的二氧化钛纳米超亲水薄膜，用扫描探针显微镜(SPM)和电化学测试系统进行一般性的表征。
Tube scanner′s structure errors have great effect on the measurement accuracy of Scanning Probe Microscope(SPM).
单管式扫描器的结构误差是影响扫描探针显微镜测量精度的主要误差因素之一。
However, it is not possible to do direct measurement, since the probe and the receiver are both sealed.
但是，由于探头和接收器都是密封装置，从外部直接测量是不可能的。
It may be used for the measurement of high magneticfields and be used as a probe for Gauss meter in low Temperature.
它在超导磁场下有较高灵敏度、重复性、低线性误差，所以可以用于测量高磁场和作为低温高斯计的探头。
How to select standard zirconia oxygen probes to achieve high precision measurement when testing zirconia probe with comparative method is described.
论述了用比较法检定氧化锆探头时，标准氧化锆探头的选择与实现其高精度测量的方法。
The test results show that the probe coil provides the desired measurement range and sensitivity with good linearity.
结果表明：探头线圈满足测量范围及灵敏度的要求，且具有良好的线性度。
The analyzer was composed of a multi plate probe and a computer controlled measurement system.
离子能量自动分析器由多极型探头和计算机控制的测量系统组成。
The paper proposes a stereo vision coordinate measurement system based on optical probe with the function of measuring and calibrating.
提出了一种基于测量与校准功能合一的光学测棒的立体视觉坐标测量系统。
In addition to the positioned thickness measurement, the electro-chemical measurement, resistance probe and inductance probe techniques were also the effective methods in corrosion monitoring.
腐蚀监测技术除定点测厚之外，电化学测量方法、电阻探针和电感探针法均是行之有效的方法。
A measurement with a resonance probe in the afterglow plasma was carried out and the resonance phenomenon was observed.
用谐振探针在余辉式等离子体中进行测量，观察到了谐振效应。
An atmospheric corrosion measurement system of reluctance probe is established to realize quick measurement of metal corrosion in different simulated atmospheric conditions.
建立了一套磁阻探针大气腐蚀检测系统，实现了模拟大气环境下金属腐蚀速率的快速检测。
With measurement speed increasing, the dynamic performance of the probe becomes an important factor which influences measurement precision.
随着测量速度的提高，测微仪测头的动态性能已经成为影响测量精度的重要因素。
As with the four-point collinear probe method, a differential measurement may be required if the sample resistance is of the same magnitude as the isolation (meter common to ground) of the voltmeter.
与四点同线探针法一样，如果样品电阻和电压表的绝缘电阻（电压表的公共端到地）是同一数量级的，就可能需要使用差分测量。
MMIC on-wafer probe is the key part of MMIC on-wafer measurement system.
MMIC在片测试探头是MMIC在片测试系统的关键部件。
The results show that the measurement volume with off-axis of the LDA-probe has different performance from that with on-axis probe.
结果表明，LDA探头非垂直布置时，测量控制体具有与垂直布置时不同的性质。
A bow type head on this probe for measurement of rollers, pipes, cylinders and most curved surface.
一种端子上带有弓状的探头，专供测量滚轴、管道、圆柱体和极弯曲的表面。
When the magnetic field is measured using a Hall probe, the measurement error due to the self-producing magnetic field by the Hall probe must be taken into account.
在采用霍耳探头测磁场时，必须考虑到探头的自生磁场所引起的测量误差。
An inductance appearance with a pole probe, automation feed framework and mode of measurement on-line are designed in the single dimension checking.
一维尺寸在线检测方法中，设计了柱形触点电感测头、自动上料机构和在线测量软件。
The accuracy of near field measurement largely depends on precise location of probe antenna.
近场测量的准确度很大程度上取决于探头的精确定位。
There is a pressure probe at a measurement location a distance L upstream of the blade row.
距叶栅上游长度为L处有一个压力探测器。
应用推荐