Machined brass construction, chrome nickel plated body, EPR rubber check disc assemblies and Buna 'n' seals, stainless steel springs and pressure plates are standard.
标准配置为机加工黄铜结构，镀铬镍阀体，乙丙橡胶止回阀瓣总成和丁钠橡胶密封，不锈钢弹簧和压力板。
EOD boots have soles reinforced with soft armor and boomerang-shaped titanium plates to reflect blast pressure away.
爆炸品处理靴使用柔性装甲和回旋镖形状的钛板强化了靴底以便反射爆炸产生的压力。
Platteville, Colorado: I'm curious as to weather the polar ice cap melt has increased pressure o the earth's plates?
普莱维尔，科罗拉多州(Platteville Colorado) ：我很好奇极地冰盖的融化会不会增加地球版块的压力。
But the Red Sea will not be an explosive or erupting volcanic region, as Hawaii is, because it will not be under pressure from colliding or compressing plates.
但是红海不会像夏威夷那样成为火山爆炸或喷发的地区，因为它不会处在来自于碰撞或压缩的板块压力之下。
As examples, the critical loads of annular plates under the uniform radial pressure and shear forces are given.
作为算例，给出了环形板在中面均匀径向压力和剪切力作用下的临界载荷。
The shell parts of reactor pressure vessels have been often fabricated with formed plates welded together, especially in USA and Japan.
反应压力容器的壳体，历来常常是用成型钢板焊接而成的，在美国和日本尤其如此。
This paper analyses the problem existing in the use of the plates of the pressure filter, and puts forward some suggestions on resolving these problems.
针对压滤机滤板在东曲矿选煤厂使用中出现的损坏情况，分析了其原因并提出了一些改进措施。
All the Y-type valves are provided with sealing plates, in particular, the "floating" sealing plates which are fixed to the surface of the manifold box by the air pressure in the bag.
所有Y型阀的装配方式都配有密封垫，特别是“浮动”密封垫利用分气箱内的空气压力固定在分气箱表面。
In these cases orifice plates or other differential pressure producing elements with differential pressure transmitters shall be considered.
在这种情况下，应使用流量孔板或配有差压变送器的其它差压元件。
A droplet of the crude oil is suspended between two parallel plates of quartz or calcite inside a simulated formation water bath at reservoir temperature and sometimes at reservoir pressure.
两个并排放置的石英盘或方解石盘中装入模拟地层水溶液，溶液的温度与油藏环境中的一样，有时压力也和油藏环境中的一样。
For analyzing the adhesion between soil and tillage tools, the profiles of pressure on the wave bulldozing plates were calculated, and we located the position of the maximum friction on the surface.
计算了波纹板表面的压力分布，并指出在土壤与农机具粘附系统中波纹形表面摩擦力最大的位置。
The first and second derivative plates of concave pressure build-up curve are presented in this paper.
本文提出了凹型压力恢复曲线的一阶导数图版和二阶导数图版。
Pressure should be the formation of metal plates instal led, straight, there should be no construction of the plate surface residue and dirt.
压型金属板安装应平整、顺直，板面不应有施工残留物和污物。
Porous plates are ceramic or polyethylene in construction which requires minimum air pressure for fluidization.
多孔板是用陶瓷制造的，或者是流化要求气压最低的聚乙烯结构。
When plate heat exchangers work at the pressure of cold and hot medium, the exchanger thermal sheet spaces, the fixed active compressing plates produce deformation of bulging.
在受冷热介质压力作用的工作状态下，板式换热器换热板片、固定和活动压紧板间将产生鼓胀变形。
In this paper, pressure distribution of gaseous slip flow in parallel plates microchannel was studied.
对平行平板微型槽中气体滑移流动的压强分布特性进行了研究。
The solutions of a large deflection problem of thin orthotropic circular plates with variable thickness under uniform pressure and under concentrated load are obtained in this paper.
本文给出了正交各向异性变厚度圆薄板在均布载荷与集中载荷作用下大挠度问题的解。
The fatigue life of different welding shapes between plates of unequal thickness in pressure vessel was investigated from the point of local stress concentration at welding position.
从焊接部位局部应力集中的角度分析了不等厚板在不同焊接形式下的疲劳寿命。
The introduction of ultrasonic vibration reduces the metal flow resistance and fluid pressure loss, raises the flow speed, raises the welding quality and facilitates welding of thick plates.
超声振动的引入降低金属流动阻力和流体压力的沿程损失，提高流动速度，提高了焊缝质量，也可有效解决厚板焊接困难。
The key technique for manufacturing this heat exchanger is the continuous pressure moulding of long plates and welding of thin plates.
较长板片的连续压制成型和薄板片间的焊接是制造该换热器的关键技术。
The solution of large deflection problem of thin orthotropic circular plates with variable thickness under uniform pressure under simply supported boundary condition is obtained in this paper.
本文给出了正交各向异性变厚度周边简支圆薄板在均布载荷下大挠度问题的解。
As pressure vessels made of stainless clad steel plates are much cheaper and have the same role of anti-corrosion, compared with those made of stainless steel plates, the former are used widely.
不锈钢复合钢制压力容器相对纯不锈钢压力容器便宜很多，又能起到相同的耐腐蚀作用，因此在石油化工行业中被广泛应用。
Computational results showed that pressure distribution curve in parallel plates microchannel was convex decreasing parabolic curve.
模拟计算结果表明，平行平板间滑移流动的气体压强分布曲线是上凸的下降抛物曲线。
In this paper, The response analysis of the structure composed of plates and shells at random pressure by MSC/NASTRAN has been completed , and compared with experimental results.
本文用MSC/NASTRAN软件完成了板壳组合结构在随机面分布力作用下的响应分析研究，并与实验结果作了比较。
The establishment of the paired high-pressure belts is of major significance for solving the problem of the geodynamic evolution of the boundary of the North China and Yangtze plates.
双高压变质带的确立对解决华北-扬子板块边界地球动力学演化问题具有重要意义。
This paper discusses the optimum design for laminated plates which can bear the internal pressure and simultaneously the one dimensional and unstable temperature field in the radial direction.
讨论了面内力和法向一维非稳定温度场同时作用下复合材料层合板的优化设计。
Anchor plates are buried structures for resisting passive earth pressure, widely used for design and construction of retaining wall structures, sheet pile bulkheads and pipeline bends.
锚锭板是一种承受土体被动抗力的结构单元，常用于支挡结构、板桩锚固和管线转弯处的设计和施工。
Optimizing the parameters of shearing lengths, shearing accuracy, blade clearance and pressure plate mechanism, so as to improve the shearing quality of steel plates.
通过对飞剪剪切长度，精度，剪刃间隙和压板机构等参数的优化，来提高钢板的剪切质量。
In letterpress, the prepared paper used on the impression cylinder or platen to increase pressure on solid areas of relief plates.
活版印刷，放于压力圆筒或压板外边的特别准备纸张。以增加印版实地部分的压力。
Compared with joining of the plates by an adhesive, the machining method can increase the durability of the plate joining portion and increase pressure resistance.
与通过粘合剂使板接合相比，该加工方法增加了板接合部分的耐久性，并增强了耐压性。
应用推荐