• To see the rendered image from the camera's point of view, you have to convert the 3d world to camera space by taking the camera position and orientation into account.

    要从摄像机的观察点观察渲染后的图像,您必须考虑摄像机的位置和方位,将3d世界转换为摄像机空间。

    youdao

  • It is a hot focus in the field of optical measurements to estimate the position and orientation of the object by using the optical image of the object observed.

    利用被观测物体的光学成像估计其三维空间的方向和位置一直为光学测量领域的一个研究热点。

    youdao

  • The balancing member is located in a predetermined position and orientation with respect to the rotor.

    平衡元件位于预定位置并相对于转子预定取向。

    youdao

  • By using recording function of CAD software, the position and orientation of output link are recorded.

    利用CAD软件的记录功能,得到机构输出杆件位姿数据。

    youdao

  • Now, what would be the best way to represent the position and orientation of human body in world space?

    目前,在世界空间坐标中用来表示人形身体的位置和方向的最好方法是什么呢?

    youdao

  • If a robot falls off the edge of the grid the word "LOST" should be printed after the position and orientation.

    如果一个机器人从格网边缘跌落,则应在输出坐标和方向之后输出“LOST”。

    youdao

  • The relative position and orientation between different components are computed as long as local coordinate system is set up to each component.

    对每个零件建立了局部坐标系,计算出不同零件之间的相对位置姿态。

    youdao

  • In order to realize the close-loop control to the cabin, three target points on the cabin must be got to solve the position and orientation of the cabin.

    为了实现对馈源舱的高精度控制,需要精确测量馈源舱上不共线的三个目标点的坐标,实时确定馈源舱的位置和姿态。

    youdao

  • A method is presented by using computational geometry techniques to determine optimal tool position and orientation for 5-axis machining with torus end-mill.

    应用计算几何技术来决定优化的刀具定位和刀具姿态以实现环形刀的5轴自由曲面数控加工。

    youdao

  • On the basis of the robot kinematics and the theory of errors, formulas for calculating the position and orientation errors of the robot end effector are derived.

    本文以机器人运动学及误差理论为基础,推导出了在各种位姿描述情况下机器人位置和姿态误差的计算公式。

    youdao

  • The hand-eye vision is used to provide the image information of object and measure the position and orientation of object, which is very important for the space robot to capture the objects.

    手眼视觉用于提供目标物体的图像信息和测量物体的位置和姿态,对于空间机器人捕获物体非常重要。

    youdao

  • According to the theory of vanishing point, a novel approach to calibrate the boresight misalignment of airborne position and orientation system (pos) based on photo nadir point is proposed.

    基于灭点理论,提出一种利用像底点检校机载POS系统视准轴误差的方法。

    youdao

  • The results of the experiment indicate that this method has many advantages, such as high precision, high speed and getting the comparative position and orientation of the laryngoscope timely.

    实验结果表明,该方法具有精确度高、速度快、可实时获得支撑喉镜的相对位置和姿态等优点。

    youdao

  • The robotic forward kinematics model can estimate the position and orientation of the PWLER robot relative to the world coordinates using each driving wheel's rotational velocity of the robot.

    运用正向运动学模型,根据PWLER各驱动轮的转速可估算出机器人相对于绝对坐标系的位置和姿态。

    youdao

  • To solve the problem of part localization with large deviation in position and orientation, a hierarchical solving method for part localization was worked out by combining macro with micro means.

    为解决大范围工件寻位这一难题,研究出宏微观相结合的递阶寻位方法。

    youdao

  • The position and workspace are analyzed, and the outlines drawing of position and orientation workspace are plotted. The effects of main structure parameters to the volume of workspace are studied.

    对这种宏动平台的位置与工作空间问题进行了分析,绘制了位置和姿态工作空间轮廓图,定量分析了各主要结构参数对工作空间大小的影响。

    youdao

  • There are some position and orientation problems when a 3d ct equipment undertakes nondestructive testing to industrial products. So product's ct slice model and its CAD model should be registered.

    利用三维ct设备对工业产品进行无损检测时,不可避免地会存在定位偏差问题,从而要进行CT切片模型到CAD模型之间的配准。

    youdao

  • Method to detect robot′s position and orientation is stu-died, and the control system project is discussed. Finally, the mechanics model that the robot works in water-mud environment is also founded.

    研究了拱泥机器人的运动控制与位姿检测方案,并建立了拱泥机器人在水下泥土环境中作业的力学模型。

    youdao

  • When Volume CT scan is processed to industrial product, there are some position and orientation problems. Therefore registration between industrial product's CT slice model and CAD model is necessary.

    在对工业产品进行体积CT扫描时,会存在定位偏差问题,所以工业产品CT切片模型与其CAD模型之间的配准是必不可少的。

    youdao

  • Position and orientation of the building fit to the site.

    建筑的位置和朝向适合场地。

    youdao

  • Finally, the damping torques of the spacesuit joints are calculated using the end torque, position, and orientation information of the spacesuit arms.

    最后,根据航天服手臂末端的力矩、位置和姿态信息计算出航天服关节的阻尼力矩。

    youdao

  • Finally, the damping torques of the spacesuit joints are calculated using the end torque, position, and orientation information of the spacesuit arms.

    最后,根据航天服手臂末端的力矩、位置和姿态信息计算出航天服关节的阻尼力矩。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定