Open Control Panel and select Power Options, then on the left side click on Choose what the power button does.
打开“控制面板”，选择“电源选项”，然后在左侧的菜单栏里点击“选择电源按钮的功能”
The study on shunt active power filter, which is a novel device compensating harmonics and reactive power current simultaneously, is the focus in the field of power quality control.
并联有源电力滤波器作为一种新型的谐波、无功综合补偿系统，是电能质量控制领域中的研究热点。
On the basis of the division of the distributed control structure of power electronic system based on the PEBB, the power converter contains two parts: application manager and PEBB.
本文在对基于PEBB的分布式电力电子系统的层次结构进行划分的基础上，将基于PEBB的功率变换器分为两部分：应用管理器和PEBB。
Plasma spray welding power source, which gives energy to plasma arc welding, involves welding technology, power electricals, control theory, computer science and technology, and so on.
等离子喷焊电源是为等离子弧提供能量的电源，涉及到焊接工艺学、电力电子学、控制理论和计算机科学与技术等众多领域。
Basing on analysis and research of the power control mode of the microwave drying device, pulsed and continuous power control mode were introduced in the test.
在对微波干燥试验装置中的功率控制方式进行分析和研究的基础上，采用了间歇式和连续式两种功率控制方式进行了试验。
The system of electric power dispatching automation is the application of advanced computer technology and communication technology on electric power control and management.
电网调度自动化系统是将先进的计算机技术和通讯技术应用于电网的运行控制和管理。
The improved control method can make the two power switches turn on and off all under soft switching conditions and further increase the switch operating frequency and power density.
通过改进控制方式，可以使这两个功率开关的导通和关断都工作在软开关条件下，从而可以进一步提高开关频率，达到增加功率密度的目的。
An interface power control strategy based on power flow tracing and generator re-dispatch is presented.
给出一种基于潮流追踪和发电机再调度的割集断面潮流控制方法。
In this paper, test results on dynamic models of static var compensators as chief means to control the node-voltages and reactive power flows in power systems are described.
文中概述了利用静止无功补偿器作为电力系统无功补偿及电压控制的主要手段在动态模型上的试验研究结果。
It consists of a power compensation algorithm based on reverse channel prediction and a common closed -loop power control algorithm.
它由基于反向信道预测的功率补偿算法和常规闭环功率控制组合而成。
Comparing with the large power system, power supply system of large companies has significantly different characteristics, and there has been relatively little research on its stability control.
相对于大型电力系统，大型钢铁企业供电系统具有明显不同的特点，对其稳定控制的研究相对较少。
Some studies on the maximum power point tacking of the PV array, and the true maximum power point tracking (TMPPT) is realized by self-optimizing control.
研究了光伏阵列的最大功率点跟踪，并采用自寻优技术实现太阳能光伏阵列真正的最大功率点跟踪(TMPPT)。
The controller can achieve the functions such as survey the power grid, reactive power compensation, harmonic control, remote communication and so on.
该控制器集电网监测与无功补偿于一体，同时完成谐波治理和通信功能。
Second, the management of power output power can be carried out by PID control mode, which is based on the error of judgment and aims at control the chopper output voltage.
采用基于误差优先判断的PID控制方式来控制斩波器输出电压，从而实现电源输出功率的控制；
Presently, there is no book with systematic study on bifurcation and stability control of power system in and abroad, especially no special book on power system bifurcation in our country.
目前国内外还没有较系统的研究有关电力系统分岔与稳定控制的书籍，特别是国内尚未见到有关电力系统分岔方面内容的专业书籍。
The communication system includes two communication channels for communication of protection and control information between two protective relays on a power line portion of an electric power system.
该通信系统包括在一个电力系统的电力线部分上用于在两个保护继电器之间交换保护和控制信息的两个通信信道。
To improve the automatization of WEDM (Wire Cut Electric Discharge Machining) and to real-time control WEDM pulse power supply, a WEDM pulse power supply based on ISA bus is put forward.
为了提高电火花加工自动化和智能化程度，更方便地实现电火花加工脉冲电源的实时控制，在现有的脉冲电源基础上开发了一种基于IS A总线的电火花脉冲电源。
In this paper, reactive power control system is developed and designed based on existing power management platform.
本文在已有的县级调度平台基础上，开发设计了电压无功综合控制系统。
The influence of UPFC and its controlling parameters on power system stability, capability of voltage regulation and power flow control are overall simulated on a one-machine to infinitive-bus system.
以单机无穷大系统为例，较全面地仿真了UPFC及其控制参数对系统暂态稳定性的影响以及UPFC的电压调节和潮流控制能力。
The regulating tactics are provided on different control zone of voltage and reactive power, according to integrated influence of voltage and reactive power with tap change and capacitor action .
首先分析电压无功控制原理，考虑了分接头的变化及电容器组的投切对无功和电压的综合影响，针对电压、无功的各种运行控制区域给出了相应调节策略。
The control parameters and regulation pattern is set up according to the power flow control problem. A detail derivation is made on the equivalent injection power equation of several FACTS devices.
针对潮流控制确定了FACTS的控制参数和调节模式，对几种FACTS装置的等效注入功率模型进行了详细推导。
For studying on dynamic reactive power optimization, a two-phase optimization method of multi-period reactive power and voltage control is proposed to confine the action times of control devices.
针对动态无功优化方法研究，本文提出了一种多时段无功电压控制的两阶段优化方法。
The VSC translating power control system adopting inverse system nonlinear control and VSC-HVDC control system based on respective adjustment of active and reactive power are designed.
万顺昌转换功率控制系统，采用逆系统非线性控制和VSC - HVDC控制系统的基础上相应的调整有功和无功功率的设计。
Then, based on the analysis of project cost management status and the existing problems of power supply company, the project cost control methods for power supply company are displayed.
通过分析供电公司工程造价管理现状及存在问题，研究并得出了供电公司工程造价控制的方法。
Unless auto-detect, user also can control ON/OFF by hand. No one activities for a while, Radar Detector will automatic turn off power to reduce power bill amount and extended product life.
除自动侦测外，使用者亦可手动控制开关，当一段时间侦测无人员活动时，雷达灯控即会自动关闭电源，节费电费并延长产品使用寿命。
This paper introduced a design method of the automatic frequency and power control of ship power station based on Canbus and DSP.
介绍一种基于CAN总线和数字信号处理器DSP的船舶电站自动调频调载控制器的研制方法。
This paper introduced a design method of the automatic frequency and power control of ship power station based on Canbus and DSP.
介绍一种基于CAN总线和数字信号处理器DSP的船舶电站自动调频调载控制器的研制方法。
应用推荐