Three dimensioned numerical simulating is applied to a big industrial burner.
对某大型工业燃烧器进行了三维全尺寸数值模拟。
The model for numerical simulating 1-d vertical flow in soil based on FEM is presented.
本文利用有限元法建立了一维土壤水运动数值模型。
Numerical simulating analysis of the main experiment results has been accomplished by use of RETRAN 02 code.
然后应用RETRAN02程序完成主要实验工况数值模拟计算。
The numerical simulating results of liquid velocities agree with the experimental data at low gas flow rate.
在低气速下，局部液体速率的模拟结果与实验数据吻合良好。
By numerical simulating computing, mechanical mechanism for interfacial fatigue debonding is analyzed further.
通过数值模拟计算，进一步分析了界面疲劳脱粘的力学机理。
A numerical simulating method of forecasting the building settlements and its distribution characteristics using engineering analogy is introduced.
介绍利用工程类比法预估建筑物沉降及其分布规律的数值模拟计算方法。
Further, numerical simulating studies about the interaction of a dam breaking long wave with an obstacle have also been done with reasonable results.
进一步对溃坝洪水长波与地面障碍物的作用进行数值模拟，得到了合理的结果。
The paper puts forward the simplified calculating method of soil stress of the culvert top on the foundation of numerical simulating and centrifuge modeling.
在数值模拟和室内离心机模型试验的基础上，提出了高填方涵洞顶部土压力简化计算方法。
The parallel computing technique is applied to design the programming for numerical simulating the fracture and damage of concrete under static-dynamic load.
对混凝土进行静动力学分析的数值模拟程序，从多个方面考虑了其中的并行算法设计。
Compared with the numerical simulating calculation, the result of software analysis has the basic same deformation time point but a different deformation length of 2.62%;
软件分析结果与数值模拟计算对比，变形时刻基本相同，变形长度相差2.62%；
Temperature in fuel spray field has a determinant influence on fuel evaporating, mixture formation, ignition and flame spreading and is very important for numerical simulating.
喷雾场的温度对燃油的蒸发，混合气的形成，着火以及火焰传播有着决定性影响。
The numerical simulating results show that soil disturbance influence on pipelines turns greater when grouting pressure, pipelines depth and distance from excavation face turns larger.
模拟计算结果证明，注浆压力越大、管线埋深越深、距开挖面越近，土体扰动对管线位移影响越大。
In simulating the wave in shallow water area, the rationality of numerical procedure with characteristics inlaid scheme will directly affect the numerically simulated results of wave.
在进行浅水区域的海浪模拟时，特征线嵌入格式的数值计算方案是否合理对海浪数值模拟结果产生直接的影响。
A numerical method for simulating electric field response in the inhomogeneous medium is introduced using lattice Boltzmann method.
介绍了用格子玻尔兹曼方法模拟非均匀介质中的电场响应的数值模拟方法。
The aim of numerical experiment of ram air turbines is mainly to simulating its adjustable pitch aerodynamic characteristic on the actual flight refuel conditions.
冲压空气涡轮流场数值研究主要目的是模拟在实际高空加油工作状态下涡轮变桨距气动特性。
Based on the evaluation of present numerical simulation of drainage holes, the all-refined simulation technique precisely simulating densely distributed drainage holes is presented and deeply studied.
在对现有排水孔幕数值模拟方法评价的基础上，提出并深入研究了密集排水孔幕全精细模拟技术。
The attemperator of the gas bypass of Jiawang PFBC-CC pilot plant was studied by simulating experiment and numerical calculation.
采用冷态模拟实验与数值计算相结合的方法对贾汪pfbc CC中试电站旁路烟道的减温器进行了专门研究设计。
Based on the numerical solution of Saint Venant Equations and proportional control mode, the author established a computer program for simulating automatic upstream control irrigation canal system.
作者通过圣维南方程组的有限差分数值解并使用比例控制方式，编写出计算机程序，实现了自动上游控制灌溉渠道系统的计算机模拟。
Besides, based on RANS method, a numerical calculation has been carried for simulating the above complex physical phenomenon.
基于RANS方法，对上述复杂物理现象进行了数值模拟。
Simulating the temperature field of a rocket motor (including propellant) by numerical method is an effective way to get real-time temperatures of the rocket propellant.
对火箭发动机(包含发射药)的非稳态温度场进行数值模拟是确定火箭发射药实时温度的一种有效方法。
Therefore, a new mixed characteristics numerical computational scheme is proposed for the LAGFD-WAM numerical wave model and is applied in simulating the shallow water wave in this paper.
为此LAGFD -WAM海浪数值模式提出了一种新的特征线混合数值计算格式，并应用于浅水海浪数值模拟。
A numerical model for simulating the temperature field of titanium melted in induction furnace with a water cooled copper crucible has been developed by using the direct finite difference method.
利用直接差分法，建立了水冷铜坩埚感应熔炼过程温度场数值模拟计算模型。
A numerical method simulating high current ion sources for neutral beam injection is given in this paper as well as its typical result.
本文叙述了中性束注入器中的强流离子源引出系统离子束光学性质的数值模拟方法，并给出了典型计算结果。
From the numerical results, the established stochastic model is comparatively effective for simulating the fiber-bridging effect.
从数值结果得出，建立的随机模型对于模拟纤维桥连是比较有效的。
This numerical method used simulating damage and fragmentation phenomena of rock-like materials is presented on the basis of discrete element method (DEM) and lattice model.
梁–颗粒模型是在离散单元法基础上，结合有限单元法提出的用于模拟岩石类材料破坏过程的数值模型。
The basic function of the CAM module, including setting up cutter manager, tool path generating, tool path simulating, and numerical control code automatically producing.
CAM基本功能模块，包括刀具库管理、刀具轨迹生成、后置处理、轨迹仿真、数控代码自动生成等功能。
Compared with the experimental data, the simulating results show that the proposed model is reliable and can be applied to the numerical simulation of turbulence flow around the fixed-cone valve.
数值模拟结果与试验资料的比较分析表明两者吻合较好，从而验证了该模型在锥阀湍流模拟中的可靠性。
In this paper, we present a numerical technique for simulating the flow of granular solids in fluids through a horizontal channel.
提出一种数值方案，模拟颗粒状固体在液体中沿一条水平管道的流动。
By means of simulating er material with equivalent viscoelastic material, the numerical results of the structural characteristics match well with the experimental results.
数值分析时采用粘弹性材料等效处理方法模拟电流变材料，计算得到的结构振动特性与实验结果吻合较好。
By means of simulating er material with equivalent viscoelastic material, the numerical results of the structural characteristics match well with the experimental results.
数值分析时采用粘弹性材料等效处理方法模拟电流变材料，计算得到的结构振动特性与实验结果吻合较好。
应用推荐