The stability of the combining ability of milling quality was low to mid degree.
碾米品质配合力的稳定性中等偏低。
Wheat milling quality traits including flour yield, flour color and ash content and its major affecting factors were reviewed.
本文对出粉率、粉色和灰分三个主要磨粉品质性状及其影响因素进行了综述。
It was found that tiller ear rate exerted no significant effects on milling quality and appearance quality of rice in the given conditions.
在本试验条件下，分蘖穗率高低对稻谷糙米率、精米率、整精米率等加工品质和垩白粒率、长宽比等外观品质无显著影响。
The degree of milling quality of grains at different parts within a rice panicle was consistent with the degree of development and filling of endosperms.
就全穗而言，穗上各部位籽粒碾米品质的优劣状况与籽粒胚乳细胞的发育和籽粒充实程度相一致。
Using high temperature air drying can improve drying rate and reduce processing time, but it could significantly deteriorate the milling quality of dried rice.
如果用高温热风干燥，尽管能提高干燥速率和缩短干燥时间，但在干燥过程中却严重损害了稻谷的品质。
Wheat grain hardness is one of the main characteristics that determines the quality, end-use and international trade through directly affecting the milling quality.
小麦籽粒硬度是小麦的重要表型性状之一，它直接影响小麦的磨粉品质，是决定小麦品质优劣、最终用途和小麦国际贸易的重要指标之一。
External quality improved obviously by Spikelet-removing, but there was no effect on milling quality, its effect on cooking and eating quality varied with varieties.
疏花后，稻米加工品质无显著变化，但外观品质显著改善，疏花对稻米蒸煮食味品质的影响因品种而异。
The difference in the milling quality of the grains on the secondary branches at the same parts between the two panicle types was greater than that on the primary branches regardless of panicle type.
穗上同一部位二次枝梗籽粒的碾米品质在两穗型材料间的差异大于一次枝梗，而穗型与其排序并无直接关系；
NC milling time and quality were also improved.
数控铣时间和质量也有改善。
Milling and appearance quality of hybrid rice were mainly influenced by the additive gene.
碾米品质和外观品质性状主要受加性基因的影响。
In the process of CNC milling, movement locus of cutting tool is important influence factor on cutting quality.
数控铣削加工曲面过程中，刀具的运动轨迹是影响加工质量的一个重要因素。
The grain hardness of wheat, reflecting character of endosperm texture, is one of the most important determinants of milling, baking and end-use quality.
小麦籽粒硬度是胚乳质地的反映，它是国际通用小麦分类指标之一，与磨粉品质、食品加工品质关系密切。
This paper introduces the positioning of rotor milling cutter, adjusting position of shape milling cutter, the measuring method of slots and quality controlling.
介绍了转子槽铣刀的对刀、成型棒铣刀的刀位调整、槽型的测量和质量控制方法。
The quality of the machined surface obtained by up milling is not very high.
通过逆铣所得机加工表面质量不是很高。
Wheat grain hardness is one of the main characteristics that determine the quality, the end-use and international trade through directly affecting both the milling and bread-making qualities.
小麦籽粒硬度是小麦的重要表型性状之一，它直接影响小麦的磨粉品质和烘烤品质，是决定小麦品质优劣、最终用途和小麦国际贸易的重要指标之一。
By using drilling, milling, grinding, file and other means to remove the quality; Can also change in slot on the balance of the precast counterweight position and quantity.
用钻、铣、磨、锉等手段来去除质量；还可以在预制的平衡槽内改罭变平衡块的位置和数量。
It has an important value for forecasting milling force for the ball end mill and offers a reference for further improving surface machining quality.
切削力模型的建立对实现球头铣刀切削力的预报具有重要的现实意义，并为进一步提高表面加工质量奠定了基础。
High speed milling of hardened mould steel can not only ensure the quality of the surface that has been processed, but also achieve a high efficiency of production.
模具淬硬钢高速铣削加工既可以保证加工表面的质量，又可以获得较高的生产效率。
Abstract: Regenerative chatter is a major factor restricting the process efficiency and quality of high speed milling.
摘要：再生型颤振是制约高速铣削加工效率和零件加工质量的主要因素。
The mechanism and method of wheat tempering were outlined. The influences of present wheat tempering on milling property and flour quality were discussed.
综述了小麦调质处理的机理和方式，探讨了目前研究中小麦调质处理对制粉特性和小麦粉品质的影响。
The phosphogypsum can be calcined into quality building plaster via neutralized with lime, ball milled or water washed, ball milling pretreated.
磷石膏经石灰中和、球磨或水洗、球磨预处理，可煅烧成优等品建筑石膏。
The experimental results showed that high quality of cavity surface can be obtained by using appropriate technologic parameter and trochoidal milling mode with micro-end mill cutter.
试验结果表明：采用小直径刀具，合适的工艺参数，次摆线分层走刀方式能加工出高质量的型腔表面。
The effects of parameters on the amount and quality of laser milling were discussed. Moreover, various laser millings on horniness alloy were realized by the use of the optimized or composite arts.
分析了工艺参数对铣削量和铣削质量的影响，并利用优化或复合的工艺对硬质合金试样进行多样激光铣削。
The high quality millet flour was obtained through wet milling.
采用湿磨法获得了高品质的小米粉。
As a result, high speed milling parameter can achieve better workpiece surface quality.
实验表明，高速铣削能够获得较好的工件表面质量。
For high quality cutting process, large-area milling machine for cast aluminum bus bar was designed.
为适应高质量的切削加工要求设计铸铝母线专用大面铣床。
The milling, cooking, eating and nutritive quality for 86 local rice varieties in Hebei were determined and analysed in the experiment.
对河北省86个地方稻米品种的加工品质、蒸煮和食用品质及营养品质进行了检测与分析。
The experimental results have shown that the modern vibration-free face-milling cutter can not only reduce vibration and noise but also increase the surface finish quality and tool life.
试验结果表明，这种新型减振端铣刀不仅可以减少振动和噪声，而且还可以提高表面加工质量和刀具寿命。
The experiment results show that the optimized milling cutter and its parameters can improve the machining quality and efficiency and reduce machining cost efficiently.
结果表明，采用该系统优选的铣刀及其切削参数进行高速铣削加工，能有效提高加工品质和加工效率、降低加工成本。
The experiment results show that the optimized milling cutter and its parameters can improve the machining quality and efficiency and reduce machining cost efficiently.
结果表明，采用该系统优选的铣刀及其切削参数进行高速铣削加工，能有效提高加工品质和加工效率、降低加工成本。
应用推荐