Although there are a number of microfluidic tools used to study worms, this is the first device that can be used to observe individual worms over their entire life.
尽管已有许多微流体工具用于研究蠕虫，但这是第一种可以观测蠕虫个体整个生命周期的装置。
This study laid a good foundation for further study of microfluidic chip.
本论文的研究结果为实验室进行下一步的研究奠定了坚实的基础。
Micro injection molding is most appropriate for commercial production of microfluidic chips owing to its high productivity.
注塑成型因生产效率高、适用于批量生产而成为微流控芯片商业化的首选成型方法。
In recent years, microfluidic chip has received increasing attention in the field of chemical and biological analysis by characteristics of rapidity, high effectiveness and low consumption.
近年来，微流控芯片凭借快速、高效、低耗等特点，在化学与生物分析领域内，获得了越来越多的关注。
Bonding is one of key processes for fabrication of microfluidic chip.
键合是微流控芯片制作的关键技术之一。
Valves are important components to control flows in microfluidic system.
微阀是微流控系统中起控制限流的重要组成器件。
A microfluidic chip rapidly identifies pathogens by scanning their genomes.
一个微流控芯片能通过扫描它们的基因组快速地识别病菌。
The present invention provides for microfluidic devices and methods for their use.
本发明提供微流体设备及其使用方法。
We used CO2 laser system to fabricate polymethylmethacrylate (PMMA) based microfluidic chip.
提出使用CO2激光器进行PMMA微流控芯片加工的方法。
A microfluidic electroosmotic pump (EOP) capable of generating high pressure was investigated.
设计了一种高压微流量电渗泵。
During its fabrication process, bonding is the key procedure to almost all microfluidic chips.
在微流控芯片的制造过程中，键合是关键步骤之一。
Objective To establish direct-write laser method for micromachining immunoassay microfluidic chip.
目的建立微流控芯片的CO_2激光直接微加工方法。
An optically controlled microfluidic chip is provided for administering a fluid to a neuronal site.
提供了一种光学控制的微流体芯片，用以控制向神经元位点的流体输送。
The character of microfluidic chip and capillary is analyzed, and UV-Curing technology is expounded.
分析了微流控芯片与毛细管各自特点，并对紫外固化技术进行了阐述。
In this review, we introduce the design, fabrication and application of microfluidic immunoassay chip.
我们对微流控免疫分析芯片的设计、制作以及应用进行了综述。
So, right now, we can actually miniaturize biological and chemistry laboratories onto microfluidic chips.
所以，现在我们确实可以在微流体晶片上，使生物和化学实验室微型化。
Kamm and his colleagues first described their microfluidic device in a January 2007 paper in Lab on a Chip.
发表在2007年1月份的芯片实验室杂志上的一篇论文中，卡姆和他的同事首次介绍了该微流体装置。
Then, the PDMS was used to cast firstly for the SU-8 microfluidic to obtain a PDMS negative mode structure.
然后，利用PDMS对所制作的SU-8微流沟道进行一次倒模，得到其负模结构；
The microfluidic Raman tweezers system has been applied for the study in cell biology at the single cell level.
微流控拉曼镊子系统已在单细胞水平上用于研究细胞生物学。
In combination with the microfluidic system, adhesion of multiple types of cells on a same substrate can be carried out.
结合微流控技术，在同一基底上也可以达到多种细胞的共培养。
Also single cell pattern arrays could be obtained in microfluidic devices and then cultured for a long term observation.
另外微流控芯片中单细胞阵列也被实现，并且细胞可以长时间的培养观察。
The invention relates to a method for detecting bacteria by using the electrochemical impedance principle and a microfluidic chip.
本发明涉及一种应用电化学阻抗原理检测细菌的方法及微流控芯片。
There are many factors which affect the mixing of microfluidic, such as the inlet velocity, diffusion coefficient, depth-width ratio, and so on.
影响微流体混合的因素有很多，如入口速度、扩散系数、深宽比等。
Mahler said that while others have developed microfluidic models of the proximal tubule before, this is the first to offer glomerular filtration.
马勒说，虽然其他人已经开发了近端肾小管微流体模型，但我们的研究首次提供了肾小球过滤的模型。
A transport and delivery system for nanogram quantities of molecular species that does not use microfluidic channels, pumps, or valves is described.
本文介绍了一种不需要微流体通道、泵或瓣膜的纳克量分子运输和递药系统。
Photolithography combined with etching technique is the most commonly used technique for fabrication of silicon, glass and quartz microfluidic chips.
光刻和蚀刻技术常用于加工硅、玻璃和石英芯片。
At present, a long period is needed to adjust parameters of microchannel figuration under hot embossing for the fabrication of PMMA microfluidic chip.
目前，PMMA微流控芯片微通道成形过程中热压参数的调整周期很长。
The present work is focused on developing electrokinetic continuous sample introduction systems for microfluidic chip-based capillary electrophoresis.
本论文的研究内容是进行基于电驱动的连续试样引入-芯片毛细管电泳分离分析的研究。
Single long molecules of DNA are then fed into a microfluidic chip, where hydrostatic pressure pulls them at a constant speed through a narrow channel.
然后单独的长的DNA分子被送入微流控芯片，静水压通过一个窄的通道以恒定的速度牵引它们。
The invention further provides methods of using and making microfluidic systems and devices which, in some embodiments, are useful for crystal formation.
本发明还提供使用以及制造微流体系统和设备的方法，在有些实施例中可用于结晶。
应用推荐