Micro carbon collector is very useful for diesel exhaust. So it's suggest to develop as soon as quickly.
碳微粒收集器对柴油机的废气治理具有重要的实用价值，建议尽快加以研制和开发。
Based on experimental data, the micro carbon pillar with an aspect ratio of over 500 was fabricated through focus moving method.
根据实验数据，使用焦距移动方法，生成长径比超过500的微碳柱。
The micro-algae thrive on carbon dioxide, producing food for livestock as well as biofuels and material for plastics.
藻类靠吸收二氧化碳来生长，而且可以被当作家畜饲料、生物燃料和制造塑料的原材料。
And the use of light-absorbing particles with low thermal conductivity, such as agglomerates of carbon nanoparticles, and carbon coated glass micro-shells.
以及运用了类似碳纳米微粒团和碳涂层玻璃微球这样的低热传导率的吸光微粒。
The structures of carbon aerogels are controlled from micro pore to macro pore by changing the concentration of catalyst and solvent.
通过改变催化剂和溶剂的用量，可以实现碳气凝胶的颗粒直径及孔洞由纳米到微米级的连续调节。
Micro-organisms need the basic nutrients are six categories of elements, namely: water, carbon and nitrogen sources, inorganic salts, growth factors and energy. and so on.
微生物所需要的基本营养物质有六大类要素，即水、碳源、氮源、无机盐、生长因子和能源。
The theory and experimental results for the formation of micro-spherical cluster of carbon atoms obtained by high Dynamic pressure method are described in this paper.
本文简要报导了采用二级轻气炮产生的动态超高压来合成微球形碳原子团簇的理论分析与初步实验结果。
Carbon nanotubes have novel mechanical, electrical properties, and they are typical 1D quantum wire. They are expected to be the fundamental materials for future micro- or nano- electronic devices.
碳纳米管具有独特的力学、电学性能，并且是典型的一维量子线，被认为是构筑未来微纳电子器件的主要材料。
Moreover, the structure, growth mechanism of carbon micro-coils and the effect of thiophene were discussed.
另外，对碳微线圈的结构、生长机理以及噻吩的作用进行了初步研究。
It is considered that the V-N micro-alloy high carbon wire rods obtain the high strength and toughness mainly due to grain refining and precipitation strengthening.
研究认为钒氮微合金化硬线钢主要通过细晶强化和沉淀析出强化，从而提高钢材的强韧件。
Using the TEM to observe the micro shape of coiled carbon whiskers, and analyze their structure by electron diffraction, it can be informed that its structure is hexagonal crystal.
用透射电镜(TEM)观察螺旋形碳晶须的微观形貌，并作选区电子衍射，分析其结构，可知螺旋形碳晶须的结构为六方晶体。
The pretreatment effect of ferric-carbon micro el ec trolysis neutralization and precipitation has been studied in this article.
研究了铁炭微电解—混凝沉淀对于化工有机废水的预处理效果。
Observations showed that the micro-structure of the steel after forging or high temperature rolling was composed of low-carbon martensite, a little part of bainite and residual austenite.
微观组织观察表明，在锻造或高温轧制状态下获得了以低碳马氏体为主，含少量贝氏体和残余奥氏体的复合组织。
Using GC/C/MS online carbon isotope analytic technic, abundant imforma- tion about single molecular carbon isotope composition can be taken from micro-samples(chromatographical scale).
MS在线碳同位素分析技术，能够从微量样品（色谱量级）中获得丰富的单分子碳同位素组成信息。
The micro morphology of low carbon steel cyclic deformed with low cycle impact fatigue was investigated it was found that the cycle deformation is caused by slipping.
观察了低碳钢在低周冲击疲劳过程中循环形变的显微特征。结果表明：循环形变主要由滑移引起。
Use micro emissions counter-flow rinsing technology, low carbon environmental clean production;
采用微排放逆流漂洗技术，低碳环保清洁生产；
Nevertheless, the combined carbon content and isotope analyses of micro-carbonate in metamorphic rocks can be used to make a distinction in origin between sedimentary and igneous protoliths.
不过，变质岩中微量碳酸盐的碳含量和碳同位素比值分析能够对原岩类型提供有效的判别。
The effect of heating temperature and cooling speed on the micro-structure and mechanics characteristics of high-carbon-steel wire normalized was studied in this paper.
研究了加热温度和冷却速度对高碳钢正火钢丝的显微组织和力学性能的影响。
The results of SEM, TEM, SAED and XRD show that the direction of gas current and the physical or chemical changes of catalyst grain cause the morphology variety of carbon micro-coils.
结果表明，反应气流的流向以及催化剂在反应过程中发生的物理和化学变化是导致碳微线圈形态变化的两个重要原因。
Gas-phase oxidation treatment resulted in distrihution of some micro-pores and ditches at the carbon fiber surface and led to stress concentration therefore, the composite strength was not high.
结果表明：空气氧化处理碳纤维表面形成微孔和刻蚀沟槽，容易形成应力集中，复合材料的强度不高；
A facile and low-cost method was reported for fabricating carbon fiber microelectrodes with micro pipette tips.
本文报道利用微量移液枪头制备碳纤维微电极。
A biological activated carbon membrane reactor (BACMR) was studied for treating micro-polluted water through lab and spot experiments for a process developing of micro-polluted water treatment.
为了开发低温环境下微污染水源水净化工艺，本课题通过实验室试验和现场试验，开展了膜-生物活性炭反应器净化微污染水源水的研究。
A highly effective method for preparation of carbon-coated iron carbide nanocrystals by AC carbon arc discharge was studied, the yield of magnetic micro powder was over 90%.
采用交流碳弧法高效合成碳包碳化铁纳米晶磁性微粉，磁性微粉产率达90 %以上。
The iron-carbon micro-electrolysis wastewater treatment principles were described.
介绍了铁炭微电解预处理高浓度难生化有机废水的原理。
The microstructure of Al-carbon bricks used in the blast furnace is studied by micro-structure analysis method, and the effects of the structure on the performance of the products also discussed.
运用显微结构研究方法，研究高炉用微孔铝碳砖的显微组成结构，探讨了组成结构对使用性能的影响。
The effect of ferric-carbon micro-electrolysis-effective synthesized microbiology is studied in this paper.
研究了铁碳微电解—高效复合微生物对于化工有机废水的处理效果。
The ablated samples of the phenolic resin-composite reinforced by various kinds of carbon fibres have been observed with SEM, their micro-structures have been compared with each other.
用扫描电镜观察了用不同种类碳纤维增强的酚醛树脂复合材料的烧蚀样品，并对其微观结构进行了比较。
This article presents research on rolling technology of micro-alloyed high carbon hard wire at JISCO.
介绍了酒钢微合金高碳钢硬线轧制工艺研究。
The properties and the research status of micro-pore carbon brick have been introduced.
本文综述了微孔碳砖的特点及研究现状。
Hot-rolled pickled steel for automotive wheel is low carbon micro-alloyed steel with excellent properties of cold forming and welding produced by using advanced TMCP technology.
宝钢车轮用热轧酸洗钢带是采用控轧控冷工艺生产的具有优良冷成形性能和焊接性能的低碳微合金化钢。
应用推荐