Micro molding is the key process for LIGA technique for low cost mass production.
微塑铸是LIGA技术大批量、低成本生产的关键技术。
A low cost calibration system for micro inertial measurement unit (MIMU) has been designed.
设计了一台低成本的微惯性测量组合标定系统。
Section one will explain the problems of scarcity and choice, the concept of opportunity cost and the difference between micro and macro economics.
第一节解释了稀缺性和选择的问题，机会成本的概念和微观与宏观经济学的区别。
A new method of producing micro ceramic device was presented. This method has characteristics of rapidness, simplicity and low cost.
研究了一种制作微陶瓷器件的快捷、方便、低成本的方法。
As a new style of the inertial sensor, the micro accelerometer has many advantages over the traditional accelerometer in its bulk, weight, cost, power consumption, reliability and length of life.
微型加速度计作为一种新型惯性传感器，它在体积、重量、成本、功耗、可靠性和寿命方面都具有传统加速度计无可比拟的优势。
MEMS (micro electro mechanical system) is a new field which has a lot of advantages: small volume, light weight, low energy consumption, fast response, big batch and low cost etc.
微型机电系统是一个新兴的技术领域，其主要优点是体积小、重量轻、能耗少、响应快、大批量、成本低等，有广泛的应用前景。
A facile and low-cost method was reported for fabricating carbon fiber microelectrodes with micro pipette tips.
本文报道利用微量移液枪头制备碳纤维微电极。
Under the given system, the main factors which influence the choice of agricultural micro-organizations exist in management cost, transaction cost and asset specialty.
在制度既定的条件下，影响农业微观组织模式选择的因素主要是管理成本、交易费用和资产的专用性。
Due to the utilization of virtual instrument and micro controlled unit in the system, the apparatus cost is reduced and the system is sizing down.
系统设计引入了虚拟仪器和单片机技术，达到了降低设备成本、小型化系统的目的。
MEMS , owning the advantages of ultra fine integrate process , miniaturization, low cost, high reliability and batch manufacturing, pose very promising future in the micro electric contact device.
微机电系统（MEMS）技术凭借其超精密集成加工的特点，具有微型化、低成本、高可靠性和可大批量生产等优势，在微电接触器件领域大有可为。
SU-8 micro reaction pools are made to contain detection solution to reduce reagent volume and unit cost.
8微反应池用来盛装反应溶液以降低反应液用量及单片成本。
The measures and solution for decreasing wire wear are proposed, which are significant to increase the precision of Micro-WEDM process, reduce the wire wear and cost of the machining process.
对进一步提高微细电火花线切割加工精度，减少电极丝的损耗，降低加工成本具有一定意义。
The cost of today's micro-irrigation systems, however, is still high.
但目前的微灌系统成本仍然过高。
The design of micro-irrigation laterals affects the project cost and irrigated quality.
微灌管网毛管的设计，直接影响到工程费用和灌水质量。
Based on the general micro-analysis of motives of outsourcing, the boundary of exhibition services' outsourcing depends on the marginal benefit and cost.
基于外包动机的一般微观分析，展览服务外包的边界取决于外包的利益与成本的边际考量。
The preparation method adopts the silicon and non-silicon compounding method for preparing the hollow metal micro-needle, and the processing cost is low.
本发明采用硅与非硅复合方法制备空心金属微针，加工成本低。
Due to a little quantity, electrical discharge machining (Micro-EDM) is usually developed in single production, leading to long production cycle, repetitive design and high cost.
微细电火花机床的需求少，通常是根据用户具体需要进行单机生产，机床研制周期长、设计重复、成本高。
Especially the plastics packages of micro-electronics, it has the character of lowly cost, simple craft as well as large-scale and roboticized production.
尤其对于微电子塑料封装，它具有成本低、工艺简单、易适合进行大规模的自动化生产的特点。
Experiments have proved that the micro vibration sensor constructed by this new method has many advantages of small volume, low weight, low cost, high sensitivity and high accuracy.
实验证明，用这种方法构建的微振动传感器体积小、质量轻、价格便宜，并且具有很高的灵敏度和准确度。
The result proves that the work load of program debugging in objective hardware was reduced, development process is accelerated and the cost is lowed by micro-controller virtual simulation experiment.
实验证明，单片机虚拟仿真实验简化了程序在目标硬件上的调试工作，有利于缩短系统开发周期，降低成本。
Finally, the paper elaborates the meaning and effect of China's commercial bank multi-cost management from the points of macro and micro aspects.
在此基础上，对我国商业银行实施全成本管理的意义和作用，从宏观和微观两个层面进行了充分论述。
The whole straight line micro-cutting device has low cost.
全套装置制造费用较低。
In this thesis, based on the CD ROM laser auto-focusing detecting principle, a low-cost, high-precision, non-contact micro-displacement measurement sensor system is developed.
本文基于激光自动聚焦探测原理研究开发了一种低成本、高精度的非接触式微位移传感器。
In this research, a kind of low-cost municipal wastewater treatment process, which consists of Hydrolysis, Anaerobic, micro-aerobic unit, is studied.
本文对一种低耗的城市污水水解—厌氧—微氧联合处理工艺进行了研究。
A complicated tear in the canvas could cost up to GBP 30,000 to be restored with museum quality micro-weave, says Mr. Brett.
布雷特说，用博物馆级别的微织技术修复油画上一个修复难度很高的破洞，花费可能会高达3万英镑。
A complicated tear in the canvas could cost up to GBP 30,000 to be restored with museum quality micro-weave, says Mr. Brett.
布雷特说，用博物馆级别的微织技术修复油画上一个修复难度很高的破洞，花费可能会高达3万英镑。
应用推荐