The flexibility of the FAS modified SiO2 nanofibrous mats was studied by mechanical properties tests.
经力学性能测试发现，经FAS改性后的二氧化硅纳米纤维膜具有一定的柔韧性。
The welded joints were completed by the X-ray test, mechanical properties tests and metallographic analysis.
焊后对焊接接头进行了射线检测、力学性能测试、接头金相组织分析。
Full size substance specimen tests shall not be replaced by mechanical properties tests with small size specimen.
说明了全尺寸实体试件试验具有很高的实用价值，是无法用小试样性能试验替代的。
And the paper recommends the necessity of measuring sample deformation directly under feedback control system in the critical ice mechanical properties tests.
指出了在严格的冰力学实验中直接测量试样表面变形并在试验机上对加载进行闭环反馈控制的必要性。
The effect of cold deformation on the aging precipitation of the solution-treated 6082 Al-Mg-Si alloy was investigated by the methods of TEM, electric resistance, mechanical properties tests.
用TEM、电阻、力学性能试验等方法研究了固溶后的冷变形对6082铝合金时效析出过程的影响。
Quality Certificate to show actual results of tests to be made, on chemical compositions, mechanical properties and all other tests called for by the Standard stipulated heron.
品质证明书内应列入根据合同规定的标准进行化学成分、机械性能及其他各种试验结果。
Industrial pipeworks. Forged steel flanges and collars. Materials. Mechanical properties. Fabrication. Tests.
工业管道系统。锻制钢法兰和套圈。材料。机械性能。制造。试验。
By employing the orthogonal and ageing-temperature tests, the influences of heat treatment on mechanical properties of 2024 Aluminum alloy sheet were analyzed.
利用正交试验和时效温度试验，分析了不同热处理工艺对2024铝合金材料力学性能的影响。
The effect of infiltration process on the microstructure and properties of iron-base materials with high alloying elements content was studied by metallography, SEM and mechanical property tests.
采用光学显微镜、扫描电镜观察和力学性能测试研究了熔渗处理对高合金铁基材料显微组织和性能的影响。
By means of tensile tests at high temperature, bending strength and indentation, it is found that the mechanical properties of silicon mainly depend on surface states, dislocations and impurities.
利用高温拉伸、抗弯测试和显微压痕测试等研究手段，指出硅材料表面状况、位错和杂质是其机械性能的主要影响因素。
It characterized the structure and feature of the nanocomposites through SEM and tests of mechanical properties.
用扫描电子显微镜(sem)和力学性能测试对复合材料的结构和性能进行了表征。
Mechanical properties and fracture mechanism of high strength steel sheet with low yield ratio under impact loading have been studied through instrumented impact and quasi-static tensile tests.
通过室温下的仪器化冲击试验和静态拉伸试验，研究一种低屈服比高强度钢板在冲击载荷下的力学性能和断裂机理。
Through the tests of mechanical properties of charging hydrogen and the corrosion tests in loop water of high temperature and high pressure, hydrogen brittleness of T225NG Ti-alloy was studied.
通过渗氢试样的常温力学性能试验和双悬臂梁试样在高温高压高纯水中的腐蚀试验来研究t 225ng钛合金的氢脆行为。
It is proved by tests that the soft rocks have more complicated mechanical properties as compared with the engineering materials.
实验和分析表明，软岩与一般工程材料相比较有更为复杂的力学特性。
At the beginning, tests are made on mechanical properties of the plastic material for making the model, the magnitude of applied load sustained and the durability measurement on the material.
开始时，对模型用的塑性材料的机械性能，试验中采用加荷的大小值，以及材料的持久性的测量作了一些试验。
The interface microstructure is analyzed by SEM and EDX. The mechanical properties of the joint is evaluated through tensile tests.
使用SEM、EDX分析了界面微观结构，通过拉伸试验对接头力学性能进行了评定。
The firing process for fly ash sintered brick with high additives has been systematically studied through tests of XRD, TG-DTA, SEM and physical mechanical properties for material.
通过XRD、TG -DTA、SEM及材料的物理力学性能等试验，较系统地研究了高掺量粉煤灰烧结砖煅烧过程。
The influences of cerium and its carbide on the strength, plasticity, impact toughness and other mechanical properties of steels were investigated through experiments and tests.
通过金相、扫描电镜能谱分析和冲击、拉伸等实验方法，研究了钢中铈及其碳化物对强度、塑性、冲击韧度等力学性能的影响。
Based on the investigation, a few lab tests are conducted to study mechanical properties of loess at Yangwagou, in the east of Lanzhou.
基于野外调查，对兰州东郊阳洼沟黄土的物理力学特性进行了室内试验。
The mechanical properties of steel WDB620 are introduced. Some traditional tests about the mechanical properties and cracking resistance on its welded joint have been made.
介绍了超低碳贝氏体wdb620钢的力学性能，用几种传统的焊接性试验方法对该钢焊接接头的力学性能及抗裂性进行了研究。
Emphatically tests the microstructure, inclusions and mechanical properties of hot rolling steel HP295 on ASP line, and compares them with HP295 on Taigang, Bengang line.
重点对ASP生产hp295热带钢的组织、夹杂物及机械性能做了检验，并与太钢、本钢生产的HP295进行了对比。
First the characteristics and mechanical properties of mental foams were discussed. Quasi-static and dynamic compressive tests were carried out on seven different aluminum foam materials.
首先讨论了泡沫金属材料的特点和力学性能，并对七种不同的泡沫铝材料分别进行了准静态和动态压缩试验。
The changes in mechanical and physical properties and chemical structure of polyvinyl formal (PVFM) foam caused by hygrothermal ageing tests were studied by means of IR and other measuring methods.
用红外光谱和其他测试方法对聚乙烯醇缩甲醛(PVFM)泡沫材料湿热老化前后力学性能、物理性能和化学结构的变化进行了研究。
Microstructure evolution and the relationship between microstructure and mechanical properties of Q235 steel were studied by thermal simulation and industrial tests.
通过热模拟试验和工业性试验，研究了Q235钢微观组织演变规律及其与力学性能的关系。
In this paper the mechanical properties of the different hybrid modes and UHMWPEF surface modification for CF/UHMWPEF composites are investigated through tests and comparison.
本文对不同铺层方式的碳纤维（CF）和高强聚乙烯纤维（UHMWPEF）混杂复合材料的力学性能进行测试，同时对UHMWPEF表面处理前后的混杂复合材料性能进行了比较。
Tensile tests, metallographic analyses and micro-Vickers tests were carried out to evaluate the mechanical properties of the joints as a function of the process parameters.
通过拉伸实验、金相分析和显微硬度测试，研究了焊接接头力学性能与工艺参数之间的关系。
Tensile rate is a key factor in tensile tests of mechanical properties at room temperature in the case that other given conditions are meet.
在室温机械力学性能拉伸试验中，在满足其它规定条件的前提下，拉伸速度是一个关键的因素。
In order to investigate the mechanical performance of lattice girders, a series of small scale static load tests are carried out and the loading properties and failure behaviour are analysed.
为研究地下工程格栅支撑这一新型支护结构的力学性能，进行了一系列格栅支撑的小比例结构静力加载试验，分析了格栅支撑的承载力性质和破坏特性。
In this paper, hot-rolling tests, using scanning electron microscopy, TEM observation and analysis of EBSD technology, microstructure and mechanical properties relationship.
本文通过热轧试验，利用扫描电镜、TEM观察和EBSD技术等分析显微组织与力学性能之间的关系。
The effects of processing parameters of TMCP, such as finish rolling temperature and coiling temperature on microstructure and mechanical properties of low CMn steel were studied by TMCP tests.
通过TMCP工艺实验，研究了终轧温度和卷取温度对低碳锰钢力学性能和微观组织的影响规律。
应用推荐