The stress, strain and displacement in pavement structure can be computed by the mechanical analysis program of the multilayer elastic system.
应用多层弹性体系力学分析程序计算路面结构的应力、应变和位移。
The laboratory is dedicated to the mechanism of the security and reliability of ocean structures, along with providing crucial mechanical analysis and technical support.
实验室致力于研究海洋结构物的安全与可靠性等相关工程问题的力学机理，提供关键力学分析与技术支持。
The mechanical analysis and the trimming were performed for a novel near space aircraft which uses the variation in wind speed at high altitude to control its flight path.
对一种利用高空风的风速差控制飞行轨迹的新型低能耗临近空间飞行器，进行了力学分析与配平计算。
Dynamic mechanical analysis was applied to the aging assessment of stator insulation.
本文把动态力学分析用于大电机环氧云母绝缘的老化状态诊断。
A mechanical model for well bore stability is established based upon mechanical analysis.
从力学分析入手，建立了井壁稳定问题的力学模型。
The requirement in accuracy for mechanical analysis with the hydrometer is presented also.
根据国内外资料提出了使用比重计法分析土颗粒的精度要求。
Experimental data on GH33A superalloy have verified the above fracture mechanical analysis.
高温合金的实验数据论证了上面的断裂力学分析。
The mechanical analysis is made on anti-slide pile with a new model of finite difference method.
通过抗滑桩结构的力学分析，建立了抗滑桩结构的有限差分模型。
Simulated results provided the precondition and foundation for mesoscopic mechanical analysis in concrete.
模拟结果为混凝土细观力学分析提供了前提和基础。
The mechanical analysis of the bit in the process of drilling is the bas- is of bit trajectory prediction.
对钻头在钻进过程中的受力分析是准确预测钻头轨迹的基础。
By mechanical analysis of the shaft of supporting wheel, a formula to calculate symmetrical cycle is derived.
笔者通过对回转窑的托轮轴进行力学分析，导出托轮轴等效对称循环应力幅的计算方法；
Dynamic mechanical analysis (DMA) could be used to evaluate the effect of softening treatment with heat and water.
动态热机械分析(DMA)可以用来评判水热处理竹材的效果。
The mechanical analysis of the prestressed anchorage cable sommer is made by the three-dimensional numerical model.
本文建立索梁及索塔锚固的三维有限元模型，分析这些部位的局部应力。
The storage modulus and damping factor of composites were also characterized through dynamic mechanical analysis (DMA).
此外，采用动态力学分析(DMA)进一步表征了复合材料的储能模量和阻尼因子。
The present paper gives a historical summary of the mechanical analysis of human head under direct impact in recent years.
本文试图回顾近几十年人头颅受直接撞击作用的力学分析的研究进展情况。
This paper mainly performs the design and mechanical analysis and research on cold extrusion mold of the gear axis in cars.
本文主要对汽车用齿轮轴的冷挤压模具进行了设计和力学分析研究。
The truss structure scheme choice, load analysis and mechanical analysis, joint analysis and implementation are introduced.
对该桁架结构的选型、荷载分析、力学分析、节点分析及工程实现等方面进行了分析。
The mechanical analysis and design were carried out on filter chamber shell, heating jacket and machine frame of melt filter.
对熔体过滤器的滤室壳体、加热夹套及机架进行机械分析和设计。
Finally, the mechanical analysis for FRP-concrete-steel double-skin tubular columns under different loading methods is presented.
最后对不同加载方式下FRP-混凝土-钢混合双管柱的轴压性能进行了理论分析。
More researches are badly needed to establish dynamic failure modes of rock mass and to carry out quantitative mechanical analysis.
但岩体动力破坏模式的建立和定量的力学分析还需更多研究。
Effect of surface state of filler on dynamic mechanical properties of composites was investigated with dynamic mechanical analysis.
本文采用动态力学分析研究了填料表面状态对复合材料动态力学性能的影响。
Based on mechanical analysis on rheological characteristics of MR damper, a novel MR damper with helix slotted plunger is developed.
该文基于对MR阻尼器流变特性的力学分析，研制了一种活塞表面刻有螺旋凹槽的新型MR阻尼器。
By using strict mechanical analysis and mathematical treatment, three rock-bit interaction models reported in literature are analyzed.
本文通过力学分析与数学推导，对已有的三种钻进模型进行了分析推理。
The axial load and centralizer spacing from the bottom to the top are calculated by using the mechanical analysis method and the log data.
采用力学分析的方法，结合测井资料，由下到上计算了抽油杆柱的扶正器间距和轴向力。
This is a systematic project, related to mechanical analysis, material properties, construction techniques and other aspects of the study.
这是一项系统工程，涉及到力学分析、材料特性、施工工艺等多方面的研究。
Through the structural design and mechanical analysis, the formula of the lateral vibration frequency and excitation force has been obtained.
通过结构设计和力学分析，得出了该工具横向振动频率和激振力公式。
The traditional optimization design is only based on the minimum cost objective function and does not consider the mechanical analysis target.
传统的优化设计仅以最低造价为目标函数，没有考虑结构的受力性能指标。
A mechanical analysis of the geological structure of Dongming Depression is conducted by applying the limit equilibrium theory of complex rocks.
应用复杂地质体极限平衡理论，研究了东明凹陷地质构造力学成因机理。
The change rule of the contact pressure, nucleation process and character were investigated by the coupled thermal-electrical-mechanical analysis.
通过结构、热电场的全耦合，分析了焊接过程中接触面压力变化规律，单边焊熔核形成过程以及形核特点等。
The correctness of design for the connecting mechanism was illustrated with the mechanical analysis based on the analysis method and graphic method.
用解析式及图解法的静力学分析说明了连接机构设计的正确性。
应用推荐