Hole growth dynamics was investigated and the process of light induced hole erasing was measured.
测量了成孔的动力学过程和光致擦除规律。
The gas flow velocities were measured in terms of a five hole spherical probe.
模型中的气流速度用五孔球形探针测量。
The fracture surfaces of 840d wheel web with a hole have been investigated and the intervals of fatigue line also have been measured.
对840d车轮辐板孔疲劳断口形貌进行观察并测量疲劳弧线间距。
Pressure and velocity fields of spatial cross section on an aircraft model with strake wing and double vertical tails were measured using a seven hole probe.
采用七孔探针对一种边条翼双垂尾布局的飞机模型进行了空间压力场和速度场的测量。
The electroluminescent characteristics are measured of the organic thin film device using TPD as the hole transporting layer and 8-hydroxyquinoline zinc as the emitting layer.
用TPD作空穴传输层、8-羟基喹啉锌作发光层，制备了有机薄膜器件，测量了其电致发光特性。
When I arrived at the site in June most of the20or so surviving beluga whales each at least12feet long were clustered near a hole that measured about10feet by16.
当我6月份到达那个地方时，20几头幸存的白鲸——每头都至少有12英尺长——大都聚在一个16英尺长10英尺宽的冰窟窿旁。
At present, hole trajectory azimuth Angle is measured mainly with magnetism sensor, but which is restricted by magnetic field and the metal tube around the surveying equipment.
目前的井眼轨迹方位角测量技术主要靠磁通门传感器，这种技术受地磁场及测量体周围金属管体的制约。
The temperature gradient in blast hole was also measured and the temperature gradient was relative to the blast hole depth and its temperature.
同时，还进行了炮孔孔内温度梯度的测量，它与炮孔深度及其温度有关。
A mechanical floating is used because of instrument, water quality and down hole tools that make in-correct result measured or instrument blocked down hole.
使用机械浮子井下流量计经常因仪器、水质、井下工具等问题，造成测试资料不准或因卡住仪器而修井。
This paper proposes that Poisson's ratio of rock mass and in-situ stress are directly determined using optimization method according to measured strains obtained from bore hole stress relief process.
本文根据孔壁应力解除法获得的量测应变，提出了采用最优化方法直接确定岩体的泊松比和原始地应力。
The test Reynolds number based on the incoming flow and the blade chord was 100000. The measured results were analyzed in conjunction with the flow fields mapped by using five hole probe.
并结合以前通过五孔针测量取得的流场进行了分析， 得出了该叶栅中紊流参数的变化规律。
In this paper, welding residual stress vertical to welding seam in LY12 armour aluminum alloy was measured by hole-drilling and electrical-measurement method.
采用钻孔_电测法对LY 12铝合金垂直于焊缝方向的焊接残余应力及其分布规律、产生的原因进行了分析，探讨了残余应力的消除措施。
The cup, which has a small hole in the bottom, is completely immersed in the liquid to be measured.
这种涂料杯，在底部有一个小孔，在测试过程中被液体浸入。
Aerodynamic parameters of the two cascades are measured by a five-hole probe at different positions and ink trace flow visualization is conducted on blade surfaces.
在不同位置采用五孔探针测量了两种叶栅的气动参数并在叶片表面做了墨迹流动显示。
In the case of the method according to the invention, in a first method step (21) an actual wall thickness of the component is measured at the location at which the drilled hole is to be introduced.
在本发明方法中，在一个第一方法步骤(21)中测量该构件在要设置钻孔的那个位置上的实际壁厚。
The measured samples are put into the central hole of the resonator.
谐振器中心打孔，单晶样品通过一介质棒伸到孔心。
The performance of hole-plate and overflow-weir liquid distributors have been measured and a proposal for the design of the two kinds of the distributors is given.
通过对孔板式和溢流堰式液体分布器性能的测定，提出了对该两种分布器设计的建议。
The temperature gradient in blast hole was also measured and the temperature gradient was relative to the blast hole depth and its tem...
同时，还进行了炮孔孔内温度梯度的测量，它与炮孔深度及其温度有关。
The team calculate that the effect could account for the frequencies of gamma rays measured by Fermi coming from the black hole at the centre of the galaxy Centaurus A ().
该小组推算了费米望远镜检测到的伽马射线频率带来的效应。这些伽马射线源于银河系半人马A星系中心的黑洞（）。
The effects of additional friction between pin and pin-hole and of the height of pin over the press-plate surface on the practically measured values was taken into account and their corrections were …
在计算中，考虑了测针与针孔壁间的附加摩擦力，以及测针端部凸出压板表面的高度对实测结果的影响，并分别进行了修正。
In this paper the flow field in swirler is measured by five-hole probe, hotwire and LDA. These results could be much the same. It can provide some ideas for design of swirler.
叙述了分别采用五孔探针、热线和激光三种流场测量方法测量旋流器模型内的流场分布情况，并得出基本一致的实验结果，从而为旋流发生器的设计提供理论依据。
The flow field in gas burner's outport is measured by the five-hole probe. Reasonable velocity information was obtained in the experiment and gained some experience in applying the five-hole probe.
使用五孔探针在模拟实验台上进行旋流燃烧器出口流场的测试，得到了较完整的旋流流场速度分布图，取得了一定的应用五孔探针进行复杂流场测试的经验。
The flow field in gas burner's outport is measured by the five-hole probe. Reasonable velocity information was obtained in the experiment and gained some experience in applying the five-hole probe.
使用五孔探针在模拟实验台上进行旋流燃烧器出口流场的测试，得到了较完整的旋流流场速度分布图，取得了一定的应用五孔探针进行复杂流场测试的经验。
应用推荐