-
All right. Supper's readyif y'all want to eat.
VOA: standard.other
-
Z So it would be incorrect to try to assign this to a variable X or Y or Z, because it doesn't actually give me anything back.
这个是错误的，来赋值这个给变量X或Y或,因为它的确没有返回什么给我。
-
If you know the second derivative of y to be a, then the answer looks like this.
如果你知道y的二阶导数是a,那么这就是答案
-
STUDENT: Let me compare y to Yeah, it's not doing all of the comparisons.
学生：让我把y和【不可闻的声音】做比较,对了，它并没有对所有的情况作比较。
-
Remember, we don't do a one-to-one correlation, because p x and p y are some linear combination of the m plus 1 and m minus 1 orbital.
记住，我们不需要把它们一一对应，因为ｐｘ和ｐｙ轨道是,ｍ等于正负１轨道的线性组合。
-
But he said the energy of an X-Y bond is going to be equal to the square root.
但他说ＸＹ键的键能,会等于ＸＸ键与ＹＹ键键能乘积的平方根。
-
y Hey, try using it to store the number 13 13 through the other pointer Y.
嘿，通过另外一个指针3,试着让它存储数字。
-
if I think it's more likely than this crossing point Y I think it's very likely they're going to choose Right.
如果我觉得对手选右的概率,会在交点Y的右方
-
If x is high relative to x-bar--this is positive-- then y tends to be low relative to its mean y-bar and this is negative.
如果x比x均值要大,这个为正,而y比y均值小,这个为负
-
If you say, "Add the vectors, " I would just add the x to the x and the y to the y and I'm keeping track of what the sum is.
如果你们说 " 将矢量相加 ",我就把同为 x 轴方向的分量相加,同为 y 轴方向的分量相加,然后就能得出这两个矢量的和是多少了
-
By the way, I didn't tell you this but I think you know that I picked my origin to be here and measured y positively to be upwards and I called that 15 meters.
顺便说一下,虽然我没明确指出,但我想你们应该都知道,我把原点取在这里,并规定y的正方向朝上,我设把这里的高度为15米
-
All right, c p 1 dot y, x I've said assign that to the value 2, 2,0. So now c p 1 has inside of it an x and y value.
一个特定的版本，我现在命名了一个内置变量，并给它赋值了,我刚刚做的也就是给它。
-
py And finally, we can look at the 2 p y, so the highest probability is going to be along the y-axis.
最后我们来看一下，概率密度最高的是沿着ｙ轴。
-
I was expecting to compare x- and y- values, not radius and angle.
噢，发生了什么？,好吧有错误了。
-
Remember, we didn't hybridize the 2 p y orbital, so that's what we have left over to form these pi bonds.
记住，我们并没有杂化2py轨道，这是我们剩下的那个行成了π键。
-
So who the sender is, so maybe you could keep track of just who your most frequent correspondents are and if you keep seeing the same personfrom person X or person Y coming into your inbox and clearlyI like having a dialog with these people or have to for work, that might in fact bubble up in your inbox.
谁是发送者，你可能会保留最近跟你联系最频繁的人,如果你发现某某人频繁发送邮件给你,这说明你喜欢和这些人保持联系,可能因工作的原因必须保持联系,那么该邮件就有可能，上升到你邮件的最上方。
-
When t is equal to 10,000 years or 10,000 seconds, you're going to find y is some huge negative number.
当t为一万年或一万秒时,我们得到y是一个极大的负数
-
It becomes a 13 and that is consistent with the code and it also doesn't crash because now y has been assigned to the correct value.
它变成了一个13，这个和代码是一致的,程序也不会崩溃,因为现在y被赋了正确的值。
-
Consequently, for this object the position y, at any time t is known to be 15+10t-5t^.
因此,对这个物体来说,在任意时刻的位移y,就应该为15+10t-5t^
-
So Y is the distance they have to travel and TY2 is their transport cost.
所以Y是他们要走的距离,而TY2是交通成本
-
So if she consumes from Firm 1 she has to walk a distance of y.
如果这个消费者想去公司1她要走Y距离
-
3 >> Okay. I'll just go over here to y and get the number 13 set up and then take the wand of dereferencing and just, whoa.
>，好的，我将到y这里，然后存储数字,然后使用魔杖，哇哦。
-
All right, it's so if I looked at it, sorry, IF x is less than y, THEN check to see IF x is less than z, and if that's true, print out x is the smallest.
好，代码是这样的，对不起，是不是x比y小，然后去看看是不是x比z小，如果都为真的话，显示x为最小值。
-
swap If main wants to give access to swap to x and Y, it just has to tell swap where x and y are.
如果main函数想要对x和y使用，只要告诉swap，x和y在哪里。
-
I'm going to call it int *y enter or, sorry, semicolon, and then what if I do this?
我把它叫做int，*y，回车，抱歉，分号，如果我这样处理，会发生什么？
-
x and get the values of x and y attached to this thing and return them to me.
和y值然后把它们返回给我，It’s，going，to，go，off,这就是我想要的东西,我想要我的类里面有一些方法。
-
I said both the x- and y- coordinates are bigger, then I'm going to return something to it.
我说过如果x和y坐标，都是更大的。
-
So I'm going to have an assignment of y, I'm going to have an assignment of iters left, I've got a comment that I had borrowed in order to do some debugging, and then what do I want it to do?
因此我需要对y进行赋值，需要对iters，left进行赋值，还有一个我用的别人的,用来调试的一些注释，那么接下来我希望程序怎么运行呢？
-
Well, it looks like I just stole my own implementation Y but I happen to call it A and B, instead of X and Y, and so here, what's going on?
嗯，看起来我刚好像盗用了我自己的实现,我碰巧叫它为A和B，代替X和，这里，发生了什么事？
-
It adds x to y and stores it into z. But if someone wants to be a even a little more snarky, what does this program do?
它把x加上y，再把结果存到z中，但是如果有人,想要做的有点不合常理点呢，那这个程序会做什么？
应用推荐