Many laser printers use an optical sensor to measure toner levels.
一些激光打印机使用光学感应传感器来测量墨粉余量。
The Mini Colibrì multi sensor system is equipped with a thermal camera (IR uncooled), TV camera (TVC) and laser range finder.
迷你Colibrì多传感器系统配备热成像仪（红外非制冷）、电视成像仪（TVC）和激光测距设备。
The mouse USES a laser sensor and wireless 2.4ghz technology.
这款鼠标配备激光光头，并支持2.4GHz无线连接技术。
The UAV targets were engaged and destroyed using the Navy's Laser Weapon System guided by Raytheon's Phalanx Close-in Weapon System sensor suite.
这些无人机被海军激光武器系统（LaWS）摧毁，其制导部件为雷神公司Phalanx迫近武器系统传感器套件。
Traditional structure light sensor fixes a laser projector and CCD sensors on its nicety back, which limits its survey area.
传统点结构光传感器将激光器和CCD传感器固定在精密背架上，限制了其测量范围。
Motor connects to the obliquity sensor to adjust the level state of laser level device.
马达与倾角传感器电连接，用以调整激光水平装置的水平状态。
The paper introduces the application of the temperature sensor AD590 in laser and optical detector.
现以ad590为例介绍温度传感器在激光器和光检测器中的这种应用。
The sensor was applied to detect several kinds of laser ultrasonic, such as surface acoustic wave, Lamb wave and longitudinal wave, well-defined waveforms were obtained.
采用该传感器测试了激光超声表面波、兰姆波和纵波，获得了很好的波形。
At the same time CCD pickup camera and laser sensor are combined to meet the high efficiency and high accurateness requirements of this non-contact measure.
同时测量系统中采用CCD摄像头和激光传感器相配合，实现了高效、高精度的非接触式测量方案。
The construction of the liquid angular sensor in the laser beacon is designed, the work principle and magnify circuit are analysed.
对激光基准信标仪中所采用的液体摆角传感器的结构进行设计，分析其工作原理、放大电路。
This paper investigated the possibility of measuring the surface roughness of wood by the laser displacement sensor of the computer control.
介绍了一种采用计算机控制激光位移传感器在线检测木材机械加工表面粗糙度的新方法。
In this paper, the time domain average meth od is used to extract the interfere signal in calibrating the phase character of vibration sensor by laser interferometer.
本文分析了时域平均法对光电信号进行滤波处理在激光绝对法校准振动传感器相频特性中的应用。
In this paper, combining the advantages of active light vision technology and passive light vision technology, an optical system of circular scanning laser vision sensor was developed.
本文结合主动光视觉技术和被动光视觉技术的优点，开发了环形扫描激光视觉传感器的光学系统。
On the basis of accurate theory, using laser emitter and photosensitive diode as testing sensor, a set of laser equipment for automobile axle depth of parallelism test is designed and produced.
利用激光发射器和光敏接收器作为检测传感器，基于准确的检测理论，设计出了激光检测法检测汽车前、后轴平行度的检测装置。
Analyzing working principle of many sensors and comparing them each other, we choose laser range finder as main sensor.
通过对多种传感器的工作原理进行分析，进行综合比较后，选用激光测距仪作为主要传感器。
The Angle of an object can be measured by counting the interference fringes of the light reflected from a laser Angle sensor mounted on the object.
利用计数装在物体上的激光角度传感器反射回来的激光的干涉条纹，可以确定物体的转角。
This paper analyzes the key problems in designing signal measuring and control circuit of laser range sensor using PSD, and gives out the circuits' diagrams.
针对采用PSD研制的激光测距传感器在检测及控制电路的设计中所存在的关键问题进行了分析，并给出了电路的设计框图。
Utilize the theory of laser conducting among skin and use infrared sensor to detect the skin temperature, design the laser operation temperature control model to improve the safety of laser operation.
利用激光在皮肤中的传导及应用红外传感器探测皮肤温度的原理，设计激光美容手术温度控制模型，控制激光手术安全。
Reconnaissance (3) - Unlocks Laser Designator, Motion Sensor, and Airstrike.
侦查(3)-获得激光指示器，运动传感器，和空袭。
A robot can be used for noncontact measurements when a laser displacement sensor is fixed to its end-link.
在自由度冗余的机器人末端连杆上安装激光位移传感器可实现灵活的非接触测量。
The principle, design scheme and performance of the instrument, which are based on double laser sensor, are described.
着重阐述了采用双激光位移传感器检测牙齿相对位移装置的检测原理、设计方案以及相关性能指标。
Some application examples and the development trends of high precision laser displacement sensor based on triangulation are given at the end of this paper.
最后阐述了高精度激光三角位移传感器的应用方向及发展趋势。
The design process of the road using laser displacement sensor was stated in detail in aspect of the hardware and software.
论文从硬件和软件两个方面详细的阐述了路用激光位移传感器的设计过程。
In this system, the laser distant sensor is used to measure the vertical welding line and the PLC is used to control the system.
该系统利用PLC作为控制核心，采用激光测距传感器来检测垂直焊缝。
Secondly, laser sensor quantitative measure wood surface roughness method and wood surface defect recognition are studied by the test system consisting of FFT analyzer, laser sensor etc.
其次，使用由FFT快速傅立叶分析仪、激光传感器等组成的检测系统，进行了激光传感器对木材表面粗糙度定量测量方法的研究和木材表面缺陷识别的研究。
An experimental investigation of influencing factors on contact bounce of DC relay by using a high-precision laser displacement sensor was presented.
利用高精度激光位移传感器测量直流继电器触头弹跳的特征参数，通过实验研究其影响因素。
The weld seam is a space curve and it gets information from structured laser sensor by user's controlling.
小范围焊缝模型定义为一条空间曲线，通过控制结构光传感器运动，来获取焊缝的三维信息。
The weld seam is a space curve and it gets information from structured laser sensor by user's controlling.
小范围焊缝模型定义为一条空间曲线，通过控制结构光传感器运动，来获取焊缝的三维信息。
应用推荐