These simplify the process of selling things by identifying goods at a checkout without the need for laser-scanning a bar code.
它无需对条形码进行激光扫描就能在结帐处辨别货物,从而简化了售卖程序。
The technology of three-dimensional laser-scanning gives a quick, precise, and untouched solution to reconstruct the surface of complex objects.
激光三维扫描技术能够快速,精确,无接触地完成复杂物体表面的重构。
But current checking methods, generally involving laser scanning, are expensive and require lengthy set-up.
但是,目前的检测方式通常都是使用激光扫描,这些方式都价格昂贵并需要长时间的设定。
The linearity analysis of laser scanning measurement has been presented.
对激光扫描测量系统的线性进行了系统的分析;
It shows that using the three dimension laser scanning and mapping system for measuring tree crown volume is practical and applicable.
研究表明,利用三维激光扫描系统测量树冠体积具有较强的实践意义和应用价值。
METHODS Immunofluorescence histochemical double staining technique was used and the staining results were observed with confocal laser scanning microscope.
方法免疫荧光组织化学双重染色,染色结果在激光共聚焦扫描显微镜下观察。
As a data collecting method, laser scanning technology has been gradually applied in surveying engineering.
作为一种采集数据的手段,激光扫描技术已逐步应用到测量工作中来。
In the framework of SP model, line segment features are extracted from laser scanning points to describe the indoor environment.
在SP模型的框架下,从激光扫描点中提取线段特征用于描述室内环境。
The temporal dispersion effect and compensation approach of femtosecond laser scanning by an acoustooptical deflector (AOD) was studied.
研究了声光偏转器(AOD)扫描飞秒激光的时间色散效应及补偿方案。
The system precision is directly affected by the sample edge measurement precision in laser scanning measuring technology.
在激光扫描检测技术中,被测件边缘信号的检测精度将直接影响到系统测量的精度。
Objective To explore the conditions under which fluorescence intensity is determined in confocal laser scanning microscopy.
目的对应用激光扫描共聚焦显微镜进行荧光强度的测定条件做了详细的分析。
This study systematically introduced the method of cytoskeleton detection in mouse oocytes and preimplantation embryos by confocal laser scanning microscopy and immunofluorescent staining technique.
介绍了应用激光扫描共聚焦显微镜,结合免疫荧光技术研究卵母细胞和早期胚胎细胞骨架的方法。
In combination with precision motion control and laser scanning along axle and circular direction, the method can classify and recognize the defects of scotching and flaking on wheel tread.
再结合精密运动控制,以及车轴和圆周方向的快速激光扫描,实现了踏面擦伤和剥离等缺陷参数的分类和识别。
This kind of device employs advanced laser scanning measuring technique, which can measure automatically the coal storage in the open coal yard without necessity of shaping coal pile beforehand.
它采用先进的激光扫描测量技术,可以在不对煤堆进行事先整形的情况下自动测量出大型露天煤场的存煤量。
In the paper, aiming at the structural characteristic and measuring requirement of bomb core, the laser scanning principle is adopted to measure several radial dimensions.
本文针对弹芯径向尺寸的结构特点和检测要求,采用激光扫描原理对其多个径向尺寸进行了检测。
To compare the impact of coloring agents on resin curing, the experiment was carried out to study the curing layer depth of resin mixed with different kinds of coloring agents under laser scanning.
研究了混入不同着色剂的液态光敏树脂在激光扫描照射下树脂单层固化厚度的变化规律,比较了不同着色剂对树脂固化程度的影响。
This paper describes the principle of the stage, and the testing of the static and dynamic properties. The whole system has been testified to work well for confocal laser scanning microscopy.
描述了工作台的工作原理,并对其静态和动态性能进行了测试,实验表明这一扫描系统能很好的应用于共聚焦激光扫描荧光显微镜系统。
The martensitic and undissolved carbide contents continuously increase as the laser scanning speed increases while the residual austenite decreases.
随激光扫描速度增大,试样中的马氏体和未溶碳化物的含量不断增加,残余奥氏体含量则连续下降。
The operating principle of laser scanning system, signal conversion and processing method during signal extracting process are described. The feasibility for objective evaluation is demonstrated.
阐述了激光扫描系统的工作原理、信号提取过程中的信号转换及数字信号处理方法,并对客观评价的可行性进行了验证。
Objective to develop a method for the optical section of laser scanning confocal microscopy of amnion and to study the spatial structure of cell and actin cytoskeleton in amnion of human embryo.
目的建立羊膜组织共聚焦激光扫描显微镜光学切片的方法,探讨早期人胚羊膜细胞结构、分层及细胞骨架的空间结构。
This makes it possible that laser scanning projection display can expand its applications to some special field.
这些优点为激光扫描投影显示在一些特殊领域的扩展应用提供了可能。
This review is about the principle, the technical composition, the characteristics and the applications of laser scanning technology.
本文将从激光扫描技术的原理、技术构成、特点及其在头面部软组织三维重建方面的应用等内容进行综述。
The principle of the laser scanning system, principle of triangulation measuring method, the structure characteristics and the relative affairs about surface fitting of laser scanner are introduced.
介绍了激光扫描系统的原理,三角法测量原理,激光扫描仪的结构特征以及曲面拟合有关问题。
The paper adopts laser scanning of the method of positive vision basing on the principle of triangle measure to detect the drawback of hydraulic turbine blade.
本文针对水轮机修复专用机器人视觉系统,采用基于三角测量原理的主动视觉法中的激光扫描法对水轮机转轮叶片缺陷进行检测。
METHODS: the intact dental plaque biofilm specimen was generated on the tooth surface. The specimens of the biofilms were imaged and analyzed by confocal laser scanning microscope.
方法:从牙齿表面获得完整的菌斑生物膜标本,运用激光共聚焦显微镜对其进行断层扫描和分析。
By using the confocal and scanning principles, a prototype of confocal laser scanning microscope is developed.
利用共焦和扫描原理,研制出共焦激光扫描显微镜样机。
Considering laser scanning technique, infrared method and electronic technology, studied and designed a set of infrared NDT system with laser scanning automatic heat loading method in this paper.
本文以激光扫描技术、红外技术及电子技术为基础,研究并设计了一套激光扫描自动热激励红外无损检测系统。
The confocal laser scanning microscopic analysis showed the double staining for EAAT1 and GFAP.
共聚焦扫描显微镜下可见EAAT1与GFAP双标记的星形胶质细胞。
A recursively increasing threshold method for the segmentation of laser scanning confocal microscopic (LSCM) biomedical images is presented.
提出了用于激光共焦显微生物医学图象分割的循环递增阈值分割法。
A recursively increasing threshold method for the segmentation of laser scanning confocal microscopic (LSCM) biomedical images is presented.
提出了用于激光共焦显微生物医学图象分割的循环递增阈值分割法。
应用推荐