The lamination teaching method requires resting not only on the students' existing knowledge, but also on their intelligence, their personality characteristics and their health psychology.
分层教学不仅要依据学生现有的知识，还要依据其智力、人格特点挖掘学习潜力，培养其和谐人格和健康的心理。
In the 1920s, the predecessor company to Libbey-Owens-Ford helped perfect the process of lamination to make windshields that didn't shatter into pieces.
上世纪20年代，利比-欧文斯-福特公司（Libbey-Owens-Ford）的前身公司完善了层压工艺，使汽车档风玻璃不致被粉碎。
The optimum technology and formulation were determined by contrast experiment, and the problem of the lamination of solids and liquids was resolved satisfactorily.
通过对比实验确定了最佳工艺条件及配方，较好地解决了八宝粥常常存在的汤汁与固形物分层的技术问题。
The advantages of the flame lamination of textiles are easy processing, wide end use, low cost, saving energy and labor. This process has good economic and social benefits.
火焰复合纺织品用途广，工艺简便，操作方便，节省能源和人工，成本低，有明显的经济效益和社会效益。
Air outlet position didn't influence the air flow field temperature field, concentration field, heat lamination height and vertical distribution of temperature of work area.
排风口位置的变化，对下层气流速度场、温度场以及烟气浓度场不产生影响，对热力分层高度、工作区垂直温度分布等热舒适性问题没有影响。
Their unique function is to provide complete control over those critical aspects of the lamination process that are inherently press related.
它们独有的功能就是为多层板工艺的各道关键性的工序提供全面的控制。
Integrated corner casting with extended side plate lamination provides extra support whilst the side access holes and wide cylinder slot ensures easy fitting and removal.
整体铸角延伸至侧板提供额外强度支撑，同时侧门孔和较宽的圆柱槽沟确保安装和拆卸的简便。
A ferroelectric capacitor is formed above a substrate and made of a lamination of a lower electrode, a capacitor ferroelectric film and an upper electrode stacked in this order.
铁电电容器形成在衬底上并由一叠层体制成，该叠层体由依次叠置的下电极、电容器铁电膜和上电极构成。
A new technology and equipment of annealing and bluing for finished stator and rotor of uncoated cold-rolled electric steel lamination in bell-type hytrogen furnace was introduced.
介绍了无涂层电工钢冲片叠片成型后的电机定子和转子在罩式炉内进行退火和发蓝处理一次完成的新工艺及装置。
A new technology and equipment of annealing and bluing for finished stator and rotor of uncoated cold-rolled electric steel lamination in bell-type hydrogen furnace was introduced.
介绍了无涂层电工钢冲片迭片成型后的电机定子和转子在罩式炉内进行退火和发蓝处理一次完成的新工艺及装置。
The results showed that the grading bamboo strand lamination is a low-swelling material. The swelling of parallel to grain, radial and tangential is lower than that of timber and LVL.
结果表明：竹层积材是一种低湿胀性材料，顺纹、径向和弦向上均远低于木材和LVL。
Due to the interaction between the permanent magnet and slotted armature lamination, there exists cogging torque in slotted permanent magnet motors, which may cause noise and vibration.
永磁电机中永磁体与有槽电枢铁心之间相互作用，产生齿槽转矩，引起电机振动和噪声。
Structural steel material of main hull structure to be of the quality as required by the Classification Society and shall be free of cracks, lamination, surface defects and other defects.
主船体结构用钢的材料须满足船级社要求，并且无裂纹、迭片结构、表面缺陷和其他的缺陷。
A method of lamination technology to produce complex material insulating cover suitable for high speed diazo printer is reported, by using nonbasic gloss fibre cloth and unsaturated resin.
报导了采用层敷工艺，使用无碱玻璃纤维布和不饱和树脂研制适于高速晒图机使用的复合材料绝缘机罩的方法。
The concrete transfer beam applies laminated beam in construction, and because of the constraint of earlier pouring concrete to later pouring concrete, shear stress is induced in lamination.
混凝土转换梁采用叠合梁的施工方法，由于先浇混凝土对后浇混凝土的约束，使叠合面产生剪应力。
On the basis of classical lamination theory and large deflection hypotheses of plate, the equilibrium and compatibility equations of simply supported composite laminated plates were obtained.
基于经典的层合板理论及板的大挠度基本假设，得到四边简支层合板的非线性运动方程及变形协调方程；
This is called laminar flow because of the concept of one lamination or thin cylindrical sheet of liquid flowing inside another. Other names for this type flow are streamline and viscous flow.
因为液体的薄圆筒层在另一个圆筒内流动，这种流动称为层流或线状流动或粘性流动。
The technique based on the rheology theorem of polymer and practical production process is introduced, to obtain the optimized products by means of coextrusion lamination of two kinds of polymers.
按聚合物流变学原理，结合实际生产工艺，在挤出成型中将两种聚合物共挤复合，获得理想产品的工艺方法。
The technique based on the rheology theorem of polymer and practical production process is introduced, to obtain the optimized products by means of coextrusion lamination of two kinds of polymers.
按聚合物流变学原理，结合实际生产工艺，在挤出成型中将两种聚合物共挤复合，获得理想产品的工艺方法。
应用推荐