In this paper, a new technique for combination jig and fixture design -combination jig and fixture CAD is put forward.
本文提出了一种组合夹具设计的新技术—组合夹具计算机辅助设计。
Provide improvement Suggestions for existing jig, and follow up and resolve using issues about the jig.
对现有的工装夹具提出改善建议，跟踪和解决工装夹具在使用中的问题。
The design optimization of jig construction, jig body, locating mechanism of crank case cores, jacket cores assembling vehicle and jig supporter was discussed.
对夹具结构、夹具本体、轴箱芯定位机构、水套砂芯组芯小车及夹具支架的设计优化进行了讨论。
It analyzes the character and application scope of motion mechanism for three typical body welding jig, presents foundation method for practical welding jig library and standardize design idea.
分析汽车车身焊接夹具三种典型运动机构的特点及其适用范围，提出实用汽车焊接夹具参数库的建立及设计标准化思路。
Therefore it is very magnificent for increasing the separation accuracy and productive capacity of the jig to improve discharging equipment of the jig .
因此，改进跳汰机排料装置对于提高跳汰机的分选精度和处理能力有非常重要的意义。
Pull out the jig dowel posts, get your hand into the sound hole and carefully peel away the cardboard jig.
拉出夹具木钉职位，进入音孔你的手，小心剥离剥夺了纸板夹具。
The paper provided the jig control model base wide collection theory after the study of jig control process.
在分析研究跳汰机控制过程的基础上，提出了基于粗集理论的跳汰机控制模型。
The composition and requirements of the vacsorb jig system are discussed, and the sample piece is also produced by using such a jig to clamp.
重点论述了真空吸附夹具系统的构成及设计要求，并用该夹具装夹加工了样件。
Compared with the traditional jig using V-block, this jig is of simple structure and easy assembling.
与V形块定位夹具相比，该夹具具有结构简单、制造及装配工艺性好等特点。
It is shown that when the jig is designed on probabilistic theory, the requirement of accuracy for the jig can be reduced or accuracy of machining can be raised.
结果表明，当夹具按概率理论设计时，可以降低夹具的精度要求或提高加工精度。
This text designed and analysed the special jig which applied on SD-006EDM, this jig possesses very highsuiatbility.
设计并分析了一套在SD-006EDM上使用的专用夹具，该夹具具有很高的可调性。
Firstly, the right jig needle bar supporting point was chosen and the deflection distribution figures and the drawing of jig body were given.
首先，通过有限元分析选择合适的夹具针杆定位点，给出了夹具针杆的挠度分布图和夹具本体的结构设计方案。
The drill jig provided by the invention solves the problems existing in the prior art, provides a drilling jig with easier operation and higher accuracy.
本发明解决了现有技术中的问题，提供一种易于操作，并且精确度较高的钻床夹具。
The method for designing welding jig by the CAD system is described. And the standardization for jig design is discussed on this paper.
给出了焊装夹具的CAD设计方法，并结合具体实际，对焊装夹具设计的标准化进行了探讨。
The utility model relates to a jig, in particular to a jig for spray painting of mobile phone shell.
本实用新型涉及一种夹具，特别涉及一种用于手机外壳喷漆的夹具。
Through the analysis of jig, the air operated jig was used which is composed by the voussoir-roller aggregate unit to solve the present production problems.
通过对夹具的分析，决定采用由楔块-滚柱联动机构组成的气动夹具来解决生产中的实际问题。
The Test Jig which provides the means to mount a ID-2278 indicator to the Test Jig with the case removed.
该测试夹具可以把一个ID- 2278指示器安装到带有可移动箱的测试夹具上。
Problems existed in using combined jig to assemble airplane are analyzed and the principle of how to select integral structure configuration of jig for airplane assembly is introduced.
分析归纳了飞机装配中采用组合式型架存在的问题； 介绍了飞机装配中型架总体结构形式的选择原则；
To meet different needs of processing holes , several kinds of jigs have been developed such as high-precision-hole jig, half-hole jig etc.
针对不同的加工要求，我们研制几款钻型精孔钻、半孔钻等以满足加工要求。
Compared with the traditional jig, this jig is in simple structure and with easy assembling.
该钻模具有结构简单、操作方便、制造及装配工艺性好等优点。
The Test Jig provides the means to mount a ID-2103 indicator to the Test Jig with the case removed.
该测试夹具可以把一个ID-2103指示器安装到带有可移动箱的测试夹具上。
The Taoshan coal separation plant had carried on the reformation on jig in 2002. It replaced original LTG-15 Baum jig with SKT-16 air chamber under the bed jig.
桃山选煤厂2002年对跳汰机进行了改造，将原来的LTG - 15型筛侧室跳汰机替换为SKT - 16型筛下空气室跳汰机。
The Taoshan coal separation plant had carried on the reformation on jig in 2002. It replaced original LTG-15 Baum jig with SKT-16 air chamber under the bed jig.
桃山选煤厂2002年对跳汰机进行了改造，将原来的LTG - 15型筛侧室跳汰机替换为SKT - 16型筛下空气室跳汰机。
应用推荐