This paper presents an accurate intersection method for Boolean operation of sculptured models.
提出了一个雕塑实体布尔操作中的精确求交算法。
Physical foundation of "intersection method" is discussed in this paper, and some examples of earthquakes are verified.
着重讨论“交汇法”的物理基础，并用实例进行证明。
The intersection method is one of the basic approaches for locating earthquakes and is not only robust but also efficient.
交切法是最基本的地震定位方法之一，该定位方法具有稳定性强、速度快的优点。
This paper analyzes the reservoir characteristics and the effects on reservoirs production, and presents an intersection method to fore.
文章从基础资料入手，通过分析储层特征和对影响储层的产量因素进行研究，提出了交会法预测储层产量的方法。
The successful practice achieved by the author in applying information intersection method in plotting and designing is introduced in order to wid…
同时把自己运用信息交合法结合图案、构思、设计的成功实践介绍给大家。
Then it analyzed the boundary geometrical intersection method suitable for a polyhedral model, and further presented a hybrid algorithm that integrates model reconstruction.
提出并分析了适合于多面体模型的边界几何求交方法，并进一步给出了融入模型重构的综合算法。
This paper introduces the method, accuracy and attention issue concerning measurement of tilt of building by using forward intersection method, through the practice of an example.
通过建筑物倾斜观测实例，介绍了应用前方交会法进行倾斜观测的方法、精度要求及注意事项。
Supposing that the intersection of multi-group fractures is treated as the internal boundary, a boundary Element Method of fracture network seepage flow is obtained.
通过将裂隙之间的交线看作为内部边界，推导了多裂隙相交时的边界单元法公式。
I described and analyzed the flow chart of the collision detection algorithm of hierarchical bounding volume and intersection testing method of the basic geometrical elements.
分析了层次包围盒碰撞检测算法的实现流程和基本几何元素间的相交测试计算。
A method taking multi samples as sub modes and grouping face modes into partial intersection ones was proposed to reduce computation and improve system extension property.
将人脸模式的多个样本作为子模式，并将较多的人脸模式部分相交地分组，以减小计算量和便于识别系统的扩展。
Two strata cutting methods were suggested, the grid cutting method to be used for horizontal and sloped sections, and the intersection line cutting method for vertical sections.
提出了地层的任意方向切割方法，即适用于水平截面和斜截面的网格分割法和适用于竖直截面的交线分割法。
This paper presents single intersection signal control method based on multi-sensor information fusion technique.
本文介绍了基于多传感器信息融合技术的单交叉口信号控制方法。
In addition, the method of finding precise point for intersection makes intersection more exact.
此外还给出了一种交点的精确计算方法，使所得交线更加准确。
In order to study adaptive traffic signal control method, intersection delay should be carefully analyzed and calculated.
为了研究交通信号的自适应控制方法，需要对交叉口延误进行定量的分析与计算。
The image sequence acquired at certain intersection has been processed, and the results indicate that this method can work out the traffic queue fast and effectively.
对某交叉口的图像序列进行实验表明，此方法能够快速而有效地计算出有效排队长度。
The compute method and error analysis of intersection frequency as well as the measuring principle and designing concept of hardware and software of two methods via single-chip computer are focused.
重点介绍了交点频率的计算方法和误差分析，提供了用单片机实现这两种方法的测量原理和硬软件设计思路。
The position of intersection of some alkenes has been predicted by this method and checked successfully by our experiments.
使用理想保留体积的方法，预测了烯烃的交点位置，并用实验作了验证。
This paper uses the intersection experiment design principle to verify outstanding performance of the optimal joints, determined by redundancy method, for the manipulator posture.
运用正交试验设计原理验证了用冗余度法所确定的最优关节对机械手姿态影响的显著性。
Intersection is the bottle-neck of city traffic, and intersection channeling design is the important method of enhancing the capability of intersection.
道路交叉口是城市交通中的瓶颈，而交叉口的渠化设计是提高交叉口通行能力的重要方法。
The coordinate transformation method to handle displacement continuation problem on the intersection line of curved surfaces in the curved shell finite element method is presented.
提出了在曲壳有限元法中用坐标转换法处理曲面交线处结点位移的连续性问题。
Based on analyzing the intersection curve between the rolled-piece and roll, the method of determining the nip point is put forward.
基于对轧件与轧辊截交线的分析，提出了在二维直角坐标系中确定轧件咬入接触点的方法。
A new method was put forward to find the intersection line and determine its visibility of general position lines and planes using overlapped projection lines.
提出用重影线法判断两重影直线的相对位置和求解一般位置直线与平面相交求交点判别可见性的新方法。
A marching method for intersection is a common using algorithm for solving intersection of parametric surfaces, as well as that of discrete surfaces.
跟踪求交是参数曲面求交常用的算法，而对于离散化的曲面也可以采用类似的方法。
Using the decentralized control method, the intersection problem of compensating spectra and closed-loop spectra is considered.
本文使用分散控制方法，讨论并解决了控制系统的补偿谱和闭环谱的相交性问题。
In this paper, an intersection signal control method using fuzzy logic is given.
该文给出了一种采用模糊逻辑进行路口信号灯控制的方法。
As the side intersection reduction method is simple of calculation and convenient of reduction, it is a good method of being used everywhere.
由于侧方交会归化法放样计算简单，归化方便，是一种大多场合都可使用的放样方法。
The intersection visibility rule of a line and general plane was concluded and a new judge method on intersection visibility of them was also put forward in this paper.
它与用重影线法求直线与平面相交交点相结合，为直线与平面相交直线可见性判断提供了一种新方法。
The paper presents a new method of selecting intersection points of one class spline regression curve.
本文给出一种样条回归交点选择的新方法。
Taking a typical intersection as an example, the crossing-capacity model of this typical intersection is established by using the stopping line method.
选取城市中最典型的十字形交叉口为对象，结合通行能力的停车线计算法，建立了典型十字形交叉口的通行能力模型。
Taking a typical intersection as an example, the crossing-capacity model of this typical intersection is established by using the stopping line method.
选取城市中最典型的十字形交叉口为对象，结合通行能力的停车线计算法，建立了典型十字形交叉口的通行能力模型。
应用推荐