The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.
切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
The polycarbonate also exhibits high impact strength and reduces the risk of accidental damage during the course of a surgery.
聚碳酸酯还具有很强的耐冲击特性，在手术过程中能减少仪器意外破碎带来的风险。
CYROLITE molding compound is moreover remarkably clear and transparent, and shows extreme impact strength even at low temperatures.
CYROLITE模塑化合物清晰透明，即使在低温下也具有极佳的抗冲击强度。
For example, elastomers (a highly deformable type of polymer) are often blended with other plastics to improve the impact strength of the material.
例如，合成橡胶（一种高弹可变形的聚合物）就通常与其它塑料相混合，来改善该材料的抗冲击强度。
In the bulk system, tensile strength, tensile modulus and impact strength are improved by 32.2%, 60.3% and 68.6%, respectively, without the loss of light transmittance.
而本体法复合材料的拉伸强度、拉伸模量及冲击强度值最大分别提高了32.2％、60.3％和68.6％，而透光性能基本未受影响。
High impact strength even at low temperatures.
在低温下也能承受高冲击强度。
Low shrinkage, high impact strength, good gloss.
收缩率小，冲击强度高，光泽度好。
It has good flexibility, and high impact strength.
它具有柔韧性好、冲击强度高等特点。
How is the impact strength related to static strength?
冲击强度和静强度是什么关系？
Improved heat distortion temperature and low temperature impact strength.
提高热变型温度和低温冲击强度。
The impact strength and the flame retardancy of the composites were tested.
并对复合材料的冲击强度、阻燃性能进行了测试。
Effects of dosages of ABS on the impact strength of rigid PVC were studied.
研究了ABS用量变化对改性硬质聚氯乙烯体系冲击性能的影响。
A new metal material impact strength measurement digital instrument is given.
给出一种新型金属材料冲击韧性数字测量仪。
The microstructure and mechanical properties of the tensile and impact strength are tested.
对修复件的显微组织进行了分析，并对修复件的拉伸、冲击性能进行了测试。
Its impact strength is 20 times that of polyvinyl chloride, nylon 10, 66 times, 8 times of ptfe.
其冲击强度是聚氯乙烯的20倍，尼龙66的10倍，聚四氟乙烯的8倍。
The impact strength of reinforced plastics by toughened resin is higher than byuntoughened resin.
增韧树脂比未增韧树脂得到的增强塑料冲击强度要高。
This paper analyzed the key factors affecting the impact strength of the general purpose polystyrene (GPPS).
分析影响通用聚苯乙烯(GPPS)产品冲击强度的因素，提出了提高GPPS产品冲击强度的有效措施。
The impact strength of their composites increases obviously and, being toughened with PSF, by a factor of 90%.
其复合材料的冲击强度明显提高，经聚砜增韧后提高了90%。
The negative effect of this reinforcement is usually a decrease in impact strength and an increase in abrasiveness.
这种加强的负作用通常是抗冲击强度降低及磨损性增加。
And the research about seat safety concentrates on the analysis of static strength, impact strength and fatigue strength.
与安全性相关的研究主要围绕座椅的静强度、冲击强度以及疲劳强度的分析。
The effects of temperature on impact strength and fractured surface morphology of ABS plastics were studied in this paper.
本文研究了温度对ABS塑料抗冲击性能和断口形貌的影响。
The results showed that the low temperature brittleness and impact strength of PP were improved observably by blend with FU.
结果表明，FU的加入可明显改善PP低温脆性，提高冲击强度。
Similarly, adding BGE also conduced to the improvement of impact strength and slight decrease in compressive strength and modulus.
加入BGE后，材料的冲击强度提高，但是压缩强度和模量减小。
The relationship between the phase structure, the impact fracture mechanism and the impact strength of the blends was investigated.
研究了共混体的相结构、冲击断裂机理和冲击强度之间的关系。
The impact strength of BMI can be improved remarkably by copolymerizing with liquid crystalline epoxy (PHBHQ) after extending chain.
BMI与二元胺扩链后，再与液晶环氧(PHBHQ)共聚，可以有效地提高BMI树脂的冲击强度。
The use of PET fiber and with glass fiber can improve the impact strength of BMC, especially when it is processed by injection molding.
本文介绍了用PET纤维与玻璃纤维混杂增强可以改善注射BMC的冲击强度。
The results show that the tensile strength and impact strength of the composite increase with the increase of carbon fiber cloth content.
结果表明，随着碳纤维布含量的增加，复合材料的拉伸强度、冲击强度提高；
The tensile strength, bending strength, impact strength, tensile modulus of elasticity and bending modulus of elasticity were determined.
测试了塑木板材的拉伸强度、弯曲强度、冲击强度、拉伸弹性模量、弯曲弹性模量等力学性能；
The result showed the impact strength and tensile strength of the composite increased with the increase of the content of the glass fiber.
研究结果表明，复合材料的冲击强度、拉伸强度随玻纤用量的增加而提高。
PEI 5% in the content, the composite material has better mechanical properties, bending strength increase by 28.0%, impact strength 26.1%.
在PEI含量5%左右时，复合材料的综合力学性能较佳，弯曲强度提高了28.0%，冲击强度提高了26.1%。
应用推荐