But also to make the wall of the impact strength has been increased.
而且还能够让墙面的抗冲击强度得到一定的增加。
On top of that, inconsistencies in impact strength from batch to batch increased the chances of having part breakages . ?
最重要的是，前后不一致的冲击强度从一批批的机会增加了部分破损。？
In general, most of the thermoplastic materials offer high impact strength, corrosion resistance, and easy processing with good flow characteristics for molding complex designs.
一般而言，大多数热塑性材料具有较高的抗冲击强度、耐腐蚀性以及良好流动性使其容易加工而适于复杂成型设计。
Its impact strength is 20 times that of polyvinyl chloride, nylon 10, 66 times, 8 times of ptfe.
其冲击强度是聚氯乙烯的20倍，尼龙66的10倍，聚四氟乙烯的8倍。
Impact heat distortion temperature and low; temperature impact strength.
提高热变型温度和代温冲击强度。
Load and impact strength test, found that this covers the load of 24 tons, the impact strength is higher than that of conventional manhole cover.
载荷和抗冲击强度试验，发现这种井盖的载荷力为24吨，抗冲击强度也超过了普通井盖。
The result showed the impact strength and tensile strength of the composite increased with the increase of the content of the glass fiber.
研究结果表明，复合材料的冲击强度、拉伸强度随玻纤用量的增加而提高。
PC board is the most significant advantage is the high light transmittance, resistance to impact strength higher makes building materials market favorite.
PC板材最显著的优势是透光率高，耐冲击强度高等成为建材市场宠儿。
Unlike the market covers is that it is pressed out by hydraulic machine, high impact strength.
与市面上的井盖不同的是，它是用液压机压出来的，抗冲击强度较大。
The coating can be solidified at room temperature, with excellent adhesion and Impact strength.
该涂料可室温固化，并有着优良的附着力和耐冲击强度。
It has good flexibility, impact strength and high.
它具有柔韧性好、冲击强度高等特点。
It has good flexibility, and high impact strength.
它具有柔韧性好、冲击强度高等特点。
The cladding layers have good tensile, impact strength, and good ductility.
熔覆层具有较好的拉伸、冲击强度和较好的韧性；
High impact strength even at low temperatures.
在低温下也能承受高冲击强度。
There is a close relationships among the variation degree of soil and vegetation and the recreational impact strength.
游憩影响强度与土壤理化性质及植被变化程度有着极密切的关系。
The effects of testing temperature on notch impact strength, fractographic features and fracture surface roughness of PVC have been studied.
研究了温度对聚氯乙烯PVC缺口冲击强度、断口形貌特征及断面粗糙度的影响。
The testing results indicate that nanosized particles are uniformly located within bulk nanoplastics, and laser powers can strongly affect the HRL and notch impact strength of nanoplastics.
试验结果表明，纳米粒子均匀地分散在纳米塑料中，激光功率对纳米塑料的洛氏硬度及缺口抗冲击强度有显著影响。
It expatiated the effects of the factors, such as sample size, temperature, humidity, notch and etc, on the result of the plastic impact strength test.
阐述了试样尺寸，温度、湿度、缺口以及缺口加工方式等因素对塑料冲击强度测试结果的影响。
However, if the polymer is pliable and has enough adhesion to filler, the conductivity and impact strength may be increased simultaneous-ly within certain content of filler.
若基体本身比较柔软且对填料有足够的亲和力，则在一定的填料含量范围内，导电性和冲击强度可同时提高。
The negative effect of this reinforcement is usually a decrease in impact strength and an increase in abrasiveness.
这种加强的负作用通常是抗冲击强度降低及磨损性增加。
The impact strength of reinforced plastics by toughened resin is higher than byuntoughened resin.
增韧树脂比未增韧树脂得到的增强塑料冲击强度要高。
Improved heat distortion temperature and low temperature impact strength.
提高热变型温度和低温冲击强度。
The impact strength of BMI can be improved remarkably by copolymerizing with liquid crystalline epoxy (PHBHQ) after extending chain.
BMI与二元胺扩链后，再与液晶环氧(PHBHQ)共聚，可以有效地提高BMI树脂的冲击强度。
The notched Izod impact strength of alloy increases with the increasing of EMG content in the condition of keeping other mechanical properties.
而随着EM G含量的增加，材料的冲击强度显著提高，且其它的力学性能基本保持不变。
The results showed that the using amount of PC had a great effect on the notched impact strength.
结果表明，对共混体系缺口冲击强度影响较大的为体系中PC的含量。
The affect of system shock absorber are also part-discussed by changing impact strength of pulse force and impact waveform.
分别讨论改变脉冲力的冲击强度和冲击波形时对系统减振效果的影响。
The impact strength and the flame retardancy of the composites were tested.
并对复合材料的冲击强度、阻燃性能进行了测试。
The content of PTFE powder filled in the epoxy adhesive can affect the impact strength, adhesive strength, hardness and dry-wear property of the adhesive.
介绍用聚四氟乙烯粉填充于环氧胶中，研究了粉的含量对冲击强度、粘接强度、硬度、干磨性能的影响。
The content of PTFE powder filled in the epoxy adhesive can affect the impact strength, adhesive strength, hardness and dry-wear property of the adhesive.
介绍用聚四氟乙烯粉填充于环氧胶中，研究了粉的含量对冲击强度、粘接强度、硬度、干磨性能的影响。
应用推荐