The productive process of hot mill is introduced.
介绍了热轧工厂生产流程。
Stephen came out of the hot mill into the damp wind and cold wet streets, haggard and worn.
史蒂芬从闷热的工厂出来，然后走进了凄风冷雨的街道，憔悴而疲惫。
This paper mainly describes the manufacturing technology for forged semi-steel hot mill rolls.
本文主要阐述锻造半钢热轧辊的制造工艺技术。
Communication subsystem of hot mill control system forms special UDP mailbox connected structure, using mailbox and event flag to communicate.
热轧控制系统通信子系统形成UDP邮箱特殊联接构架，使用邮箱和事件标记完成控制系统各个进程的通信。
In hot mill production the slabs have to be heated to a certain degree of temperature, so that the slabs would be more plastic and easier to be rolled.
在轧钢厂的热轧生产中，必须将要轧制的板坯加热到一定的温度，使它具有一定的可塑性，才能轧制。
These spalls occur in work rolls with flake graphite iron core used in highly loaded 4-hi hot mill stands and are predominantly located in the centre of the barrel.
这种剥落往往发生在片状石墨芯部的离心工作辊(4辊轧机)，而且发生的部位往往是辊身中部。
In August, Australia's largest steelmaker, BlueScope, cited the Australian dollar as one reason for its decision to shut a blast furnace and a hot strip mill, at the cost of perhaps 1, 000 jobs.
八月，澳大利亚最大的钢铁商，蓝璀钢铁(BlueScope)指出他们关闭一个炼铁高炉和热带轧机的一个原因就是澳元升值，结果是减少了1000个工作岗位。
Two-Stand Hot Reversing Mill is very complex as a auto control object, and rolling process is automatic procedure, the architecture of control system base on hierarchical control structure.
双机架炉卷热轧机是复杂的控制对象，而带钢轧制过程是一个高度自动化的生产过程，其控制系统基于分布式分级递阶控制结构。
Another method is to cold-rolling method, it is to Mannesmann brothers invented Meng Hot rolling Mill of the methods used in cold working.
另一种方法是冷轧法，它是将孟内斯曼兄弟发明的热轧机应用于冷加工中的方法。
Two-Stand Hot reversing mill is a reversing mill, two stand roll can realize roughing phase and finishing phase, large-scale rolling force, good shape.
双机架炉卷热轧机是典型的往复式轧机，它的两个机架实现粗轧和精轧，轧制压力大，板型精度高。
How to minimize risk, testing time and cost of project for modernization of existing or new building hot rolling mill are up-to-date subjects.
在热连轧精轧机组的改造或新建过程中，如何降低生产风险，减少调试时间和降低成本是当前的研究热点。
Facilities that combine all the stainless steel making facilities from melt shop through hot rolling and cold finishing, to produce mill products.
包含所有的不锈钢生产设施，即炼钢车间、热轧、冷加工等设备的工厂。
The total number of mills, productivity and characteristics of Chinese hot wide strip mill construction were introduced.
重点介绍了我国热轧宽带钢轧机建设的数量、设计产量、建设模式特点等综合情况。
Process of rolling cold coils of pickled hot-rolled sheet through a cold reduction mill to make the stainless steel stronger, thinner, and smoother by applying pressure.
通过冷轧工厂轧制热轧的、酸洗的不锈钢薄板使不锈钢在压力作用下更薄、强度更高、更光滑。
The rolling process and mathematical model of the KISCO hot rolling mill are presented, and based on this, methods and skills for online self-study with the model are discussed in details.
介绍了昆钢双机架轧机轧制流程和数学模型，并在此基础上详细讨论了模型在线自学习的方法和技巧。
The trends of development of fully-continuous narrow hot strip mill is also pointed out.
同时还叙述了全连续热轧窄带钢轧机的发展趋向。
Compared with Bengang 1700 hot rolling mill, the strip rolling product has smaller crystal granularity, higher strength value, and lower extension rate.
从热轧产品看：与本钢1700热连轧机相比，晶粒尺寸略小，强度值略高，延伸率略低。
The article describes the optimization of flying shears system for the technical revamping of a hot continuous rolling mill.
对国内某钢厂热连轧机飞剪进行技术改进，实现剪切的最优化。
In this paper, we introduce methods of shape control and application of shape control in cold and hot strip mill.
本文介绍国外有关板形控制的方法及在冷、热板轧机上的应用。
The slab tracking system for hot strip mill is an indispensable part in the computer controlling system during continuous rolling.
热连轧机板坯跟踪系统是连轧过程中计算机控制系统不可缺少的部分。
The results of calculation is reliable and can be used as reference in hot strip mill design.
计算结果可靠，可供设计人员在设计热带轧机时参考。
The 1450 Hot Strip Mill of Panzhihua New Steel & Vanadium Limited Company has built in 1993, it is the important plates processing mill of PanGang.
攀枝花新钢钒股份有限公司热轧板厂1450热连轧机组于1993年投产，是攀钢重要的板材加工厂。
The new FNN is used in the control of hot rolling mill production and a satisfying result is obtained.
将这种模糊神经网络用于热轧产品的质量控制，获得了好的效果。
It has been proved that high Cr cast iron rolls are fit for finishing mill of 1549 hot strip mill of Tisco.
介绍了高铬轧辊化学成分和生产工艺，实际使用证明高铬轧辊适合太钢1549热连轧精轧机组。
The scale thickness distribution on SPHC strip rolled by CSP process is investigated and compared with that by traditional hot rolling mill.
研究了CSP热轧SPHC单张板和板卷的氧化皮厚度，并与传统热连轧产品进行了比较。
Process automation system for Laiwu Steel 1500 mm hot strip mill is described, include system figuration, network, functions of middle ware and application.
介绍了莱钢1500热轧带钢过程自动化系统，包括系统配置、网络结构、中间件和应用软件的主要功能模块。
This article introduced the application situation of on-line surface inspection technology in Meishan 1422 hot rolling mill.
据此，介绍了在线检测技术在梅钢1422热轧的应用情况。
It is necessary to hit accurately the head of the strip for applying absolute AGC in hot rolling mill, important means are to improve accuracy of set-up model and convergence of self-learning model.
带钢热连轧精轧机组穿带后的头部厚度精度- - -头部命中率将直接影响绝对AGC的工作，其重要手段是靠提高设定模型精度、模型自学习的收敛速度。
It is necessary to hit accurately the head of the strip for applying absolute AGC in hot rolling mill, important means are to improve accuracy of set-up model and convergence of self-learning model.
带钢热连轧精轧机组穿带后的头部厚度精度- - -头部命中率将直接影响绝对AGC的工作，其重要手段是靠提高设定模型精度、模型自学习的收敛速度。
应用推荐